Small Camponotus Formicarium remix complete with Outworld (that uses acrylic post-it note holder by Kpence73

Last crawled date: 2 years, 11 months ago

This is a formicarium with tube adapters to make it modular. I used 1/2 vinyl tubing. If the tubing it tight, heat it a little and it will go over the adapters.
The outworld is made from a post-it not holder. Buy from here: https://www.misterplexi.com/products/mp8-n.html
For the bottom (which holds water) I printed with 100% infill, everything else was 20%.
The lit to the outworld is made so you have cut a square of window screen and use the square bracket to hold it in place. Just use superglue to keep it all together.
The yellow boxes are test tube holders. I found them on here.
I am sure in time they will need a much larger set up but for at least a year they should be good in these.
The bottom has room for cotton as a hydration chamber. The original formicarium had the bottom open so they could access the cotton. I saw this as a way to escape so I closed the bottom and pinholed it for humidity control. Then they have a water tower and a sugar tower in the outworld.