Thingiverse
Slingshot by Mnemonic
by Thingiverse
Last crawled date: 3 years ago
"What´s up doc?"
"I am hunting rabits!"
Time to off some paper rabits. You know you want to.
Post Process:
The handle is made for a kids hand, and the finger-grip might be a little sharp so I sanded it a little.
You can use a rubber band that you cut in half and tie it through the holes, but I used some Ninja-Flex filament.
If you want to make it stronger you can take 3 pieces of Ninja-Flex and wind them together, and them heat them a little with a heat gun, afterwards you can push the ends through the holes, fold them, and them use zip ties on them. This will make them too big to go back through the holes.
WARNING: This toy if used at your own risk. Do not shot real animals, humans or other living things. So while it is still fun, and before someone loses an eye. :)
I am sure you can find some animal models here on thingiverse that you can print out, and hunt down.
"I am hunting rabits!"
Time to off some paper rabits. You know you want to.
Post Process:
The handle is made for a kids hand, and the finger-grip might be a little sharp so I sanded it a little.
You can use a rubber band that you cut in half and tie it through the holes, but I used some Ninja-Flex filament.
If you want to make it stronger you can take 3 pieces of Ninja-Flex and wind them together, and them heat them a little with a heat gun, afterwards you can push the ends through the holes, fold them, and them use zip ties on them. This will make them too big to go back through the holes.
WARNING: This toy if used at your own risk. Do not shot real animals, humans or other living things. So while it is still fun, and before someone loses an eye. :)
I am sure you can find some animal models here on thingiverse that you can print out, and hunt down.
Similar models
thingiverse
free
RoadHog's "Scrap Gun" by NoaLd
...ain" as him, so i decided to make to make them a little christmas present. but now you can have it too, through thingiverse.
thingiverse
free
Mini Prusa Dampers with Holes for Base-Mounting by Thingismith
...lawed design. perhaps it could still work if a compression spring was included, you could use the screw to hold the bottom down.
thingiverse
free
Chess set out of my own head by PRATRIK
...verse. all "head ornaments" are separate objects so if you want to replicate you can download and isolate the ornaments
thingiverse
free
Raspberry Pi Stackable case for Screen by seankennedy
...well as an acces port to let a ribbon cable through.
i used a adafruit pitft plus 320x240 2.8" tft + capacitive touchscreen
thingiverse
free
Nozzle Wrench by 3D_ThingKing
...nd also if you want to support me making cool things for download, even the smallest tip would be appreciated. thank you so much!
thingiverse
free
Joystick goodies
... a "washer" thing that covers the joystick shaft a bit to make it look nice, so you can print it in any color you want.
thingiverse
free
Filament pass through by pquade
...ng through.
can be drilled out to allow ptfe tube to pass through.
i'll be making some adjustments and might post them later.
thingiverse
free
Adapter for ANET A8 spool holder by tm4n
...it even sturdier, but you don't really need it.
make sure you turn it on the flat side so it can be printed without supports.
thingiverse
free
Banana Door Stopper by 3D_ThingKing
...nd also if you want to support me making cool things for download, even the smallest tip would be appreciated. thank you so much!
thingiverse
free
Kamaz Axle Housing RMX by PrincessJessie
...asier, it bolts on through 6 little holes, you want to drill them a bit larger when you put them together, it worked well for me.
Mnemonic
thingiverse
free
Johnny Mnemonic Pinball Matrix Ball Guide by Kingmiwok
...ng at photos and test fitting prototype printed parts on my jm game.
i printed in gray thinking it would be the least noticeable.
thingiverse
free
Board game - Tic Tac Toe by Mnemonic
...toe, noughts and crosses boardgame.
the pieces snap together, so that you do not loose them. or you loose them together anyway :)
thingiverse
free
Original Prusa i3 MK2 Pen Holder by Mnemonic
... pen holder for the original prusa i3 mk2 3d printer.
you can use it to do 2d plotting or circuit board drawing for pcb etching.
thingiverse
free
Snap Lock by Mnemonic
...not know how they would behave in other materials. i printed them using 30% fill. i think less would work just as fine or better.
thingiverse
free
Trigonometry Learning Aid by diy_engr_2014
...a learning aid for trigonometry. it is a trigonometric mnemonic chart, which is a fancy way of saying it...
thingiverse
free
BrailleTree by TCardLab
...brailletree by tcardlab thingiverse brailletree is a visio-tactile mnemonic aid to learn grade-1 braille in minutes. braille literacy...
thingiverse
free
WPC Pinball Ball-Trough Wedge (Bally - Williams '90-'99) by childofthehorn
...- may 1995 indianapolis 500 - june 1995 johnny mnemonic - august 1995 jack·bot - october 1995 who dunnit...
thingiverse
free
Movable, H-bonded polypeptide - print-in-place
...for assembly of multiple tripeptides, apply jane richardson's 'corncrib' mnemonic (richardson81) and refer to the labelled photo. observe that...
3dwarehouse
free
Johnny Mnemonic pinball machine
...johnny mnemonic pinball machine
3dwarehouse
pinball machine by williams 1995, to scale #johnny_jonny_mnemonic_pinball
Slingshot
3d_export
$19
Slingshot
...slingshot
3dexport
slingshot - 4k png textures
turbosquid
$19
Slingshot trainer
...ree 3d model slingshot trainer for download as , obj, and stl on turbosquid: 3d models for games, architecture, videos. (1684879)
3d_export
free
sports slingshot assembly
...sports slingshot assembly
3dexport
sports slingshot assembly, without hand rest, for three harnesses
turbosquid
$39
Fork Slingshot
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
slingshot(mac)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$7
rubber band slingshot
...ullet. just print some parts and find a rubber band and do some woodwork，then you will have the powerful slingshot，just have fun！
humster3d
$75
3D model of Polaris Slingshot 2015
...ailed 3d model of polaris slingshot 2015 in various file formats. all our 3d models were created maximally close to the original.
turbosquid
$15
Slingshot crib paper towel holder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
One Piece Usopp Slingshot Cosplay Weapon Prop
...splay weapon prop for download as max, dwg, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1521908)
3d_ocean
$12
Unmanned Air Vehicle
...man-portable. suavs monoplanes are typically launched by throwing or slingshot and continue flying on their own....