Thingiverse
Slim LED Holder for Qidi Tech 1/FFCP by malakid
by Thingiverse
Last crawled date: 3 years ago
This is a remix of FlashForge Nozzle Light V2 by frasersnow.
I use an Arducam, which sticks pretty far into the printer, so I couldn't use frasersnow's front back plane, so I used the rear back plane. But even that didn't work well for me, because it hung too low in front of the camera and obscured the view of the nozzle. So I imported the rear back plane into Tinkercad and reduced the height to 11mm. I also replaced the wiring holes with 1.5mm holes that nicely line up with the electrical contacts on the LED strip.
I'm too lazy to tear my printer apart to get to the power supply, so I used an external 12v power supply for the LEDs. You may want to tap into your printer's power instead.
No additional hardware necessary.
I use an Arducam, which sticks pretty far into the printer, so I couldn't use frasersnow's front back plane, so I used the rear back plane. But even that didn't work well for me, because it hung too low in front of the camera and obscured the view of the nozzle. So I imported the rear back plane into Tinkercad and reduced the height to 11mm. I also replaced the wiring holes with 1.5mm holes that nicely line up with the electrical contacts on the LED strip.
I'm too lazy to tear my printer apart to get to the power supply, so I used an external 12v power supply for the LEDs. You may want to tap into your printer's power instead.
No additional hardware necessary.
Similar models
thingiverse
free
Ender 3 - Dual Top LED strip holder by dalhoj
...he power supply and connected true the button directly in to the power supply, so it powers up when the 3d printer en powered up.
thingiverse
free
Snapmaker 2.0 Power Supply Bracket Rear by lob40000
...01. i separated them because if you want the same look for the front and back, you can just mirror it and keep the look you want.
thingiverse
free
Lack PowerSupply Mount by niget2002
...seem to really add much heat to the enclosure.
you will need 4 of the power supply mounts and one of each of the other two parts.
thingiverse
free
FlashForge Nozzle Light V2 by frasersnow
... removable. i used jaycar pt4452.
remember to wire the 2 leds in series not parallel as the supply is 24v and the leds are 12.
thingiverse
free
CTC 3D-Printer LED Illumination by JoThing
...in
back of the x-axis.
because of 24v led's it is possible to connect it (secured by a fuse)
immediately to the power-supply.
thingiverse
free
Snapmaker 2.0 Power Supply Bracket Front by lob40000
...urns on it will charge it up and glow after i turn it off. silly i know but i wanted to try out my gid filament i just got! enjoy
thingiverse
free
Xantrex XHR 40-25 power supply knob by dmatsumoto
... so i printed a replacement. the hole for the pot was too small, so i drilled it out and it's a nearly perfect friction fit!
thingiverse
free
Flashforge Creator X front power switch by bookmake
...an use power switch from the back of your printer. you'll have to lengthen one cord from power socket (as seen on the photo).
thingiverse
free
Tevo Tarantula 50 x 110 power supply vertical strap mount bracket by theWorstTerry
...vers on thingiverse.
if you end up printing one, please post a make! i love seeing the stuff i spend time on being put to use :)
thingiverse
free
Tarantula PSU rear cover. by Grenwall
...version that works great if you have the same power supply as me. it's the one with one large hole keeping the fan uncovered.
Malakid
thingiverse
free
Joy Keychain by malakid
...joy keychain by malakid
thingiverse
another remix, another keychain
thingiverse
free
Hanna Keychain by malakid
...hanna keychain by malakid
thingiverse
another keychain and another remix of kpng's mahalo fridge magnet.
thingiverse
free
Longer Handle for Stanley Blades by malakid
...longer handle for stanley blades by malakid
thingiverse
a longer handle for people with big hands.
thingiverse
free
Freightliner Keychain by malakid
...hingiverse
i really like riccardo3d's original design, but i wanted to retain the freightliner logo's distinctive shape.
thingiverse
free
Hanna Keychain V2 by malakid
...nna keychain for another hanna.
if you want to print it in three colors like this, pause and change filament at 6.1mm and 8.41mm.
thingiverse
free
Smoking is Healthier Than Fascism by malakid
...lthier than fascism by malakid
thingiverse
take it from dr. "bob" dobbs, geniuses - smoking is healthier than fascism.
thingiverse
free
Whatever emoji v.2 by malakid
...atever emoji v.2 by malakid
thingiverse
whatever dude! ¯\(ツ)/¯
v.2 created using https://image.online-convert.com/convert-to-svg
thingiverse
free
VW Skull Keychain by malakid
...ychain and happyhomer's shepherd zipper-pendant. made for someone with a vw gti. the filament is proto-pasta iron filled pla.
thingiverse
free
SparkPilots Logo by malakid
...ered to add:
print background in the color of your choice.
pause at 2.1mm and change to black.
pause at 4.1mm and change to blue.
thingiverse
free
Hooks for Bird Temple by malakid
...ooks to specifically fit over a small tree branch and over the ring on the bird temple.
https://www.thingiverse.com/thing:2852328
Ffcp
thingiverse
free
FFCP Stepstick cooling tunnel by etet100
...ffcp stepstick cooling tunnel by etet100
thingiverse
ffcp (mightyboard) stepsticks cooling tunnel.
thingiverse
free
FFCP-Touchscreen-Mount
...touchscreen. information about my build can be found here:
https://fraggin-right-github.gitbook.io/ffcp-klipper-dwc-touchscreen/
thingiverse
free
FFCP GoPro Adapter by mianzel
...cp to record your prints, it was design on fusion 360 and can be use with the door open or close.it uses the two screws on front.
thingiverse
free
FFCP filament guide by grimblgrombl
...fcp filament guide. it's designed so that the tubes end in the middle of the "filament spool width". it works good.
thingiverse
free
FFCP DUCT by natewin
... screw hole to be a bit stronger as a 3d printed part.
if you've broken yours this should get you very close to the original.
thingiverse
free
FFCP GoPro compatible mount by kashhatton
... platform.
instead of a gopro, i use a logitech c525 webcam using the mount found here: https://www.thingiverse.com/thing:1554378
thingiverse
free
FFCP camera mount by sparlez
...ffcp camera mount by sparlez
thingiverse
another camera mount. hope it helps someone.
thingiverse
free
Door Holder Opener For FFCP by caseygr
...door holder opener for ffcp by caseygr
thingiverse
hold door open while heat hood is on
thingiverse
free
Rear Face of FFCP V1 top cover by gromo
...by gromo
thingiverse
hi
i draw this rear face of the top cover of my ffcp v1
i used a cnc to make it (online stl to dwg)
thierry
thingiverse
free
Ultra simple spool holder for FFCP (flashforge creator pro) by ben8p
...you to add a piece of pvc pipe and an m10 bold
see: http://www.instructables.com/id/spool-holder-for-flashforge-creator-pro-ffcp/
Qidi
thingiverse
free
Qidi XMAX Spool Clamp
...qidi xmax spool clamp
thingiverse
a simple spool clamp for qidi tech xmax or xplus spool holder(30mm diameter).
thingiverse
free
QIDI Upper spool holder by Shibatam
...qidi upper spool holder by shibatam
thingiverse
upper spool holder for qidi.
use this when the back space is narrow.
thingiverse
free
Qidi Z axis brace by mjgrundmann
...qidi z axis brace by mjgrundmann
thingiverse
used to stiffen up the z axis guide rods on a qidi tech i.
thingiverse
free
DEROULEUR BOBINE QIDI by bil26
...i by bil26
thingiverse
bonjour,
c'est un montage pour imprimante qidi xmax .
montage avec 2 x roulements 6002.
cordialement,
thingiverse
free
QIDI Glass Bed Clips by ChrisX35
...idi glass bed clips by chrisx35
thingiverse
qidi glass bed upgrade.
new clips are here https://www.thingiverse.com/thing:2480107
thingiverse
free
Bed level QIDI - Microsoft LifeCam by lemacs
...bed level qidi - microsoft lifecam by lemacs
thingiverse
bed level camera mount for qidi - microsoft lifecam
thingiverse
free
Qidi X-One cooler duct by rpagyc
...qidi x-one cooler duct by rpagyc
thingiverse
extruder cooling duct for the qidi tech x-one
thingiverse
free
Qidi Tech PTFE adapter by sewallman
...h ptfe adapter by sewallman
thingiverse
adapter for a 6mm ptfe tube to fit ontop the qidi tech xmax/xplus/imates extruder cover.
thingiverse
free
QIDI Shadow filter plug by shifter
... by shifter
thingiverse
this is a cap/plug for the qidi tech shadow 5.5s. to cover the spot where the pointless air filter goes.
thingiverse
free
QIDI Door Latch by TobyC84
...i created for the qidi printer. it holds the door open while you print pla or while you remove a print from the print bed! enjoy!
Slim
3ddd
$1
Кровать Jupiter slim
...кровать jupiter slim
3ddd
jupiter slim
кровать jupiter slim
design_connected
$10
Slim Chair
...slim chair
designconnected
ligne roset slim chair computer generated 3d model.
3ddd
$1
Minotti Andersen Slim
...minotti , andersen , slim
minotti andersen slim
3ddd
$1
Bottoni Slim
... кресло из коллекции moooi.
oдноместный,плотность пены несколько на фанерной раме, ноги из нержавеющей стали.
размеры: 62x76x86cm
3ddd
$1
Slim Sofa
... slim , arbel
om website: beltafrajumar.com
designer: arbel
formats: 3ds, c4d, fbx, obj
3ddd
free
Складной стол SLIM
...кладной , стол
складной стол для переговоров slim.
размеры соблюдены, текстуры в архиве
3ddd
$1
Slim - Dema
...slim - dema
3ddd
dema
3ddd
free
Luce Verde Slim
... verde , slim
luce verde slim
ø 1300 h 45 mm
lumen led 6500
kg 35
artikel 790.69.01.00
turbosquid
$29
FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Tech
design_connected
$13
Tech
...tech
designconnected
alivar tech computer generated 3d model. designed by scandola, matteo.
design_connected
$16
Hi Tech
...hi tech
designconnected
living divani hi tech computer generated 3d model. designed by lissoni, piero.
3d_ocean
$15
Tech Light
...diomax 9 or above includes the .3ds and .obj files includes maps other features to note: the main light is grouped and the piv...
turbosquid
$60
Tech Commander
...uid
royalty free 3d model tech commander for download as fbx on turbosquid: 3d models for games, architecture, videos. (1209942)
turbosquid
$3
Tech Heart
...squid
royalty free 3d model tech heart for download as blend on turbosquid: 3d models for games, architecture, videos. (1480511)
3ddd
$1
Кресло Hi-Tech
...кресло hi-tech
3ddd
hi-tech
современное хромированное кресло
3ddd
$1
luster hi tech
...luster hi tech
3ddd
luster hi tech для офиса))
turbosquid
$10
Tech pokeball
...yalty free 3d model tech pokeball for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1418339)
3ddd
$1
Стол hi-tech.
...стол hi-tech.
3ddd
стол hi-tech.
материалы, освещение, рендер.
turbosquid
$7
Shisha Tech
...ty free 3d model shisha 3d tech for download as sldas and ige on turbosquid: 3d models for games, architecture, videos. (1670897)
Led
3d_export
$5
led
...led
3dexport
the led is cut with all the parts.
3ddd
$1
Monacor / PARL56DMX / LED-320RGBW / LED-345RGBW / LED-300RGB
... прожектор
http://www.monacor.dk/
parl56dmx
led-320rgbw
led-345rgbw
led-300rgb
turbosquid
$10
LED
...led
turbosquid
free 3d model led for download as blend on turbosquid: 3d models for games, architecture, videos. (1691856)
3d_export
$5
led lamp
...led lamp
3dexport
led lamp, brightness animation
3ddd
free
leds-c4
...leds-c4
3ddd
leds-c4
современный торшер
3ddd
free
leds-c4
...leds-c4
3ddd
leds-c4
настольный лампа
turbosquid
$19
LED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Led
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
LED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
LED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Holder
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
1
turbosquid
$69
armchairs(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
ring 1+1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
RING 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
house 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Table 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Formula 1(1)
...lty free 3d model formula 1 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1567088)
design_connected
$11
No 1
...no 1
designconnected
sibast no 1 computer generated 3d model. designed by sibast, helge.
turbosquid
$2
desert house(1)(1)
...3d model desert house(1)(1) for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1055095)