Thingiverse
Slightly stronger grip 'predator action pliers' by Ozcymm
by Thingiverse
Last crawled date: 3 years ago
*Update - you should probably just print Ecoiroas' V2 version now instead of this one as it incorporates the same concept to increase the grip strength, but is better because he made it :)https://www.thingiverse.com/thing:2949649
I really liked the original design of these by Ecoiroas, but just wished they had more grip strength. This is a quick hack I did to his original model where I shortened the piston rail gear and realigned it a little bit so that the gear isn't totally engaged when the jaws are making contact. This way it gives you a little bit of room to apply some more force. They do seem to have a noticeably stronger grip (but nothing amazing still, the gears flex out with too much force)
The jaws on these don't open all the way back like the original, but they do open out about as wide as you would expect. See photo.
PETG is probably a good idea as it is is less brittle..
I really liked the original design of these by Ecoiroas, but just wished they had more grip strength. This is a quick hack I did to his original model where I shortened the piston rail gear and realigned it a little bit so that the gear isn't totally engaged when the jaws are making contact. This way it gives you a little bit of room to apply some more force. They do seem to have a noticeably stronger grip (but nothing amazing still, the gears flex out with too much force)
The jaws on these don't open all the way back like the original, but they do open out about as wide as you would expect. See photo.
PETG is probably a good idea as it is is less brittle..
Similar models
thingiverse
free
Tiki Mask (Stronger jaw) by rkxone
...f the edge geometry at the jaw point to make it less likely to break hopefully, and smoothed out just a few small areas:)
enjoy!
thingiverse
free
Clamp by SkysurferUK
...stronger grip. jaws open to 50mm.
edit:
after a week, still no thumbnails for this design! thingiverse, you have to do better!!!!
thingiverse
free
Emergency Cash Capsule by I_need_a_better_name
...l possible for someone without a lot of hand strength. as a result, it is a little bit smaller than the original keychain i made.
thingiverse
free
Belt Tensioner (hopefullya little bit stronger) by elvisior
...his one up in tinkercad and flip it to try and give it a little more strength. i'm about to print it and see how it goes....
thingiverse
free
Posterboard Backdrop Clip for 16mm Mic Stand by nebarnix
...in. i was not actually able to pull it out without opening the jaws, however.
perfect for backdrops hung on microphone stands :)
thingiverse
free
Z Axis bar wire guide remix by barrettford
...pplies more torquing force to the arm, but it probably doesn't make much of a difference to the overall strength of the part.
thingiverse
free
DJI Mini Battery puller by grazuncle
...la.
the legs of the gadget are different lengths specifically as the reach is different to the battery clip and the battery slot.
thingiverse
free
Half fast gear by ESalamanca
...s just laying down sketches and made this. you should also print it flat.
if you do print it, please post a picture of it. thanks
thingiverse
free
Fanatec Podium Wheel Wrench/Spanner by WIGG77
...sign from chad711.
also trimmed a few mm off the jaws at the front as you couldn't easily push it over the wheel drive shaft.
thingiverse
free
RG350M Gamepad Grips by MadeInNewYork87
...ug fit, if you want less snug just scale it up a little bit 1-2%. these grips will stand up straight.
open to community feedback.
Ozcymm
thingiverse
free
Mandrel for hoop earrings by Ozcymm
...s will work for a few sets as i'm not looking to become a professional jeweler. it is 50mm at one end and 10 mm at the other.
thingiverse
free
Raspberry pi enclosure camera mount by Ozcymm
... make a mount that i could stick somewhere inside the enclosure itself instead. just using some command tape as it is very light.
thingiverse
free
Dactyl Manuform 5x6 keyboard wrist rests by Ozcymm
...ently also attempting to print this in tpu, but not sure how that will work out.. definitely is going to take a long time though.
thingiverse
free
Elecom Huge Trackball mouse ergonomic stand by Ozcymm
...ls in grade school. seems to work pretty good.
you'll also want to do something to the bottom to keep it from sliding around.
thingiverse
free
Elecom Huge Wireless Trackball mouse ergonomic stand by hooky_at
...is essentially the same design as thing:2932373 designed by ozcymm the difference is the small pocket directly under the...
thingiverse
free
Elecom Huge Wireless Trackball mouse ergonomic stand with 20mm added to bottom
...is essentially the same design as https://www.thingiverse.com/thing:2932373 designed by ozcymm the difference is the small pocket directly under the...
thingiverse
free
Predator Action Pliers Mk2 by ecoiras
...general structural strength. to fix the grip i followed ozcymm#39;s approach but instead of shortening the piston i just...
Predator
3d_export
$15
predator
...predator
3dexport
predator
3d_export
$18
predator
...predator
3dexport
turbosquid
$9
Predator
...r
turbosquid
royalty free 3d model predator for download as on turbosquid: 3d models for games, architecture, videos. (1322726)
3d_export
free
predator shuriken
...predator shuriken
3dexport
predator shuriken
turbosquid
$10
Predator
...d
royalty free 3d model predator for download as 3ds and obj on turbosquid: 3d models for games, architecture, videos. (1152845)
3d_export
$6
predator mask
...predator mask
3dexport
predator mask lowpoly
turbosquid
$299
Predator
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
mask predator
...mask predator
3dexport
an incredible mask, very detailed. based on predator. any questions write me please
3d_export
$17
MQ-1B Predator
...mq-1b predator
3dexport
mq-1b predator
3d_ocean
$5
Predator
...plane poly predator remote texture uav vehicle
ready to be used in production ready situation including all the major 3d formats.
Pliers
3d_ocean
$9
pliers
...pliers
3docean
asset linesman's pliers pliers
maya2013 mb .
3d_export
free
pliers
...pliers
3dexport
high quality pliers
3d_export
$2
pliers
...irs of toothed grooves for gripping and turning cylindrical parts, as well as a notch - both on the flat part and on the grooves.
turbosquid
$29
Pliers
...
turbosquid
royalty free 3d model pliers for download as max on turbosquid: 3d models for games, architecture, videos. (1241477)
turbosquid
$15
Plier
...r
turbosquid
royalty free 3d model plier for download as c4d on turbosquid: 3d models for games, architecture, videos. (1289544)
turbosquid
$1
Pliers
...d
royalty free 3d model pliers for download as obj and blend on turbosquid: 3d models for games, architecture, videos. (1444865)
turbosquid
$1
Pliers
...royalty free 3d model pliers for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1390005)
3d_ocean
$12
Pliers Set
...pliers set
3docean
hand tool plier repair tool work work shop
a set of five different pliers.
turbosquid
$39
Pliers
...y free 3d model pliers for download as max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1430365)
turbosquid
$29
Pliers
...free 3d model pliers for download as blend, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1376746)
Stronger
3d_export
$5
gorilla monster stronger rigged
...stronger rigged
3dexport
gorilla zombie made in blender<br>textures albedo,normal,specular 1024x1024<br>rigged model
3d_export
$39
Mercedes-Benz G Line Stronger Than Time 2021 wheel
...mercedes-benz g line stronger than time 2021 wheel
3dexport
3d_export
$129
mercedes-benz g 400 d amg line stronger than time 2021
...------------------------- thank you for buying this product. we look forward to continuously dealing with you. creator 3d team!!!
3d_export
free
monster flower
...power that gave the flower the ability to grow stronger and...
3d_export
$60
lockheed martin f-35 c lightning ii
...wingtip sections, larger control surfaces for improved low-speed control, stronger landing gear for the stresses of carrier arrested landings,...
3d_ocean
$15
New Shoe
...so forth this is a 3d model. it is stronger and more lasting shoe is comfortable and sturdy and...
3d_ocean
$5
HDRi Studio Light 5
...studio hdri hdri studio light 5 front light is stronger then the side ones. 10000×5000 px hdr exr...
3d_ocean
$10
Green-Steel Weapon Set
...models. a special emerald powder ingredient makes green-steel much stronger than ordinary...
3d_export
$7
wheel rims
...the connection between parts of structures to make it stronger and the movements of each prong to make it...
3d_export
$5
Bill chipper
...beings in the entire multiverse. only the axolotl is stronger than him (a little more about him later). his...
Grip
3d_ocean
$5
Hand Grips
...hand grips
3docean
3ds hand hand grips obj sport
3d model hand grips c4d file +obj+3ds
turbosquid
$4
Pistol Grip
...osquid
royalty free 3d model pistol grip for download as stl on turbosquid: 3d models for games, architecture, videos. (1489529)
turbosquid
$1
Grip for a gun
...ree 3d model grip for a gun for download as 3ds, max, and fbx on turbosquid: 3d models for games, architecture, videos. (1316268)
turbosquid
$35
Vice Grips
... 3d model vice grips for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1233289)
turbosquid
$1
Gun Grip
...ee 3d model gun grip for download as 3ds, obj, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1357070)
turbosquid
$30
Hand Grips
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Hand Grip
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Hand Grip
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Grip Knife
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Grip Master
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Action
turbosquid
$5
Action Camera
...id
royalty free 3d model action camera for download as blend on turbosquid: 3d models for games, architecture, videos. (1673223)
turbosquid
$30
Action Hero
...royalty free 3d model action hero for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1181694)
turbosquid
$6
Action Game
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
triple action carabineer 2
...er 2
3ddd
triple action carabineer , карабин
triple action carabineer for safe climbing.
3d_export
$5
action camera
...els. but in general, the model is not bad enough, and if you use it correctly, then i'm sure your models will be very cool :)
3d_export
$5
300 bolt action rifle
...300 bolt action rifle
3dexport
300 bolt action rifle
3d_export
$7
woodstranding action figurine
...woodstranding action figurine
3dexport
turbosquid
$129
Lever Action Rifle
...
royalty free 3d model lever action rifle for download as obj on turbosquid: 3d models for games, architecture, videos. (1327623)
turbosquid
$10
Ricoh action camera
...royalty free 3d model ricoh action camera for download as fbx on turbosquid: 3d models for games, architecture, videos. (1421494)
turbosquid
$7
Pump Action Shotgun
...royalty free 3d model pump action shotgun for download as fbx on turbosquid: 3d models for games, architecture, videos. (1419882)
Slightly
turbosquid
free
Fork slightly used
...bosquid
free 3d model fork slightly used for download as fbx on turbosquid: 3d models for games, architecture, videos. (1230401)
turbosquid
$19
Slightly Worn Leather Chair - Game/VR Ready
...hair - game/vr ready for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1275581)
3d_export
$5
teapot
...teapot 3dexport an ordinary kettle, slightly ...
3d_export
$5
depth chargemk9
...depth chargemk9 3dexport actual size may vary slightly ...
3d_export
$8
skippy cyberpunk2077
...hjke-11 yukimura “skippy”: a smartwith a unique voice-user interface. slightly ...
3d_export
$15
world war carrier
...model was made from akagi ship. however, it is slightly different from the...
3d_ocean
$3
Grass Hand Painted Texture Tile
...floor tile, one of healthy green grass, one of slightly subdued grass and the last is a slightly darker...
3d_export
$5
orthodontic aligners
...teeth. wearing them puts gentle pressure on the teeth, ever-so-slightly repositioning...
3d_ocean
$19
Cartoony Pirate Model
...caricature cartoony fantasy funny pirate pirate hat pirates a slightly caricatured, cartoonish pirate...
3d_ocean
$3
Striped Jersey 5
...seamless tilable jersey texture with bump and normal map. slightly ...