Thingiverse
Sliger CL530 LINKUP 4.0 Riser Adapter by deckar01
by Thingiverse
Last crawled date: 2 years, 10 months ago
This allows the LINKUP Ultra PCIe 4.0 Riser Cable to be installed in the Sliger CL530.
To avoid extra fasteners, the part must be pressed forcefully (hammered) onto the existing rear mounting pegs. The closed screw slit on the PCIe slot also needs to be cut so that it can be shifted back 1 or 2 mm. This risers has hard plastic protectors on the ends of the cables, so I would recommend using a heat gun (hair dryer) to make the cable more flexible so it can be shaped when installing.
I ordered the 25cm cable, but the original cable appears to be 20cm. I personally like the way the cable aligns with the top of my GPU now.
To avoid extra fasteners, the part must be pressed forcefully (hammered) onto the existing rear mounting pegs. The closed screw slit on the PCIe slot also needs to be cut so that it can be shifted back 1 or 2 mm. This risers has hard plastic protectors on the ends of the cables, so I would recommend using a heat gun (hair dryer) to make the cable more flexible so it can be shaped when installing.
I ordered the 25cm cable, but the original cable appears to be 20cm. I personally like the way the cable aligns with the top of my GPU now.
Similar models
grabcad
free
Linkup PCIE 4.0 riser cable with mount.
... for the case.
also the cable on the motherboard part is not 100% accurate. it will stick through the pcie holder when attached.
thingiverse
free
LINKUP Ultra PCIE 4.0 Gen4 Riser Cable Support (for Corsair iCUE PC cases & maybe other cases) by Slegnor
...nother case to check.
the standoffs i used in the case were m3x6mm+6mm.
print settings:
quality: 0.2
infill: 10-20%
material: pla
3dwarehouse
free
CPayne Low Profile Bifurcated PCIe x8x8 riser offset
... slot with a short cable linkup right angle adt-link r33sr adt-link r33ur 3d file can be downloaded here: https://a360.co/3sa2y9k
thingiverse
free
Riser PCIe
...riser pcie
thingiverse
riser pcie lock
grabcad
free
Lotes pcie 4.0 16x connector - SLDPRT
...d the model from a pcie riser card i have at home. i have included 2 steps, one with pins and one without to accomodate for that.
thingiverse
free
PCI-e Riser Clip by simlpyjerry
...this pcie riser clip from the ground up. it fits most mbs and even the tightly spaced pcie slots on the asrock h110 mother board.
thingiverse
free
SSD mount for PCIE risers by somefreak
...oles (if there is none there already)
use 6 hdd screws to attach the mount to the case.
run your cables and plug in your cards :)
grabcad
free
pcie to usb riser
...pcie to usb riser
grabcad
this is a pcie 1x to usb riser.
there are many slightly different brands and versions
thingiverse
free
Thermaltake Riser Cable - Cover
...onnection.
versions:
geforce gtx1080
blank
let me know what i can improve or what wish you have.
looking forward to your makes :)
thingiverse
free
PCIe Riser Quirky Clip (no supports) by alfonder
...! some design considerations were made to allow printing without supports.
i follow @leeph recommendations and print 3 at a time.
Sliger
thingiverse
free
Sliger Cerberus SFX-L Adapter For Rear by forg0t
...erse
rear adapter plate for the sliger cerberus to relocate the sfx-l.
print in petg with supports for the recessed screw holes.
thingiverse
free
140mm Fan Grille (Brick) Sliger Pattern by mediocre_menudo
...ades while maintaining the sliger aesthetic. open fan grille included to create a shroud around radiator fan and improve airflow.
thingiverse
free
Sliger case headphone hook by tobort
...es allow for optional use of a zip tie to secure it to the case - i haven't actually found it to be necessary for my own use.
thingiverse
free
Side Panel Spacer(s) for Sliger SM550 by inheritthefire
...e the footprint of the side panel are to accommodate the fans of a powercolor red devil rx 6800 xt.
https://imgur.com/a/ttqw8xj
thingiverse
free
Slim ODD Mount for Sliger S620 by FourOhFour
...39;t think this will work for a tray-loading drive, at least not without removing the front panel when you want to use the drive.
thingiverse
free
Gavin Belson Signature by jzxtran
...not going any where. the pc case is a sliger conswole....
thingiverse
free
Air intake for 92mm fan
...intake to reach the vented side panel of a sliger sm550 or sm560 case. this mounts using the longer...
Deckar01
thingiverse
free
Arwing (Repaired) by deckar01
...endly design by: classy goat
repaired front by: deckar01
be sure to print the wolfen too: http://www.thingiverse.com/thing:533608
thingiverse
free
Water Stone Vase by deckar01
...vase by deckar01
thingiverse
a stylized vase replica of the water stone form the 1997 sci-fi film "the fifth element".
thingiverse
free
TFT Little Legend Egg by deckar01
...tft little legend egg by deckar01
thingiverse
the little legend egg from team fight tactics.
https://youtu.be/wfnb0tpnvfi
thingiverse
free
Clone Gator (Air Layering Propagation Pod) by deckar01
...ne gator (air layering propagation pod) by deckar01
thingiverse
clone difficult plants by growing roots before taking clippings.
thingiverse
free
RTX 3080 Founder's Edition by deckar01
...designed to be 3d printed, but it is solid, so if you break it apart and get it to print please consider uploading it as a remix.
thingiverse
free
Quantum Device by deckar01
...power the device and travel back in time 3 weeks to save myself the trouble of trying to render this thing with just openscad. ;)
thingiverse
free
[Modular] Valve Index Prescription Lens Adapter by deckar01
...ernate lens adapters based on zenni frames shaped more like the index lens which use metal frames that are easier to disassemble.
thingiverse
free
Collapsable Bread Slicer (Cutting Guide) by deckar01
...to lock together for easier storage. the other parts are backwards compatible, so you just need to print 2 new guides to upgrade.
Linkup
turbosquid
$20
Pro-linkup BH-P616 Pedestal Basin
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$37
Pro-linkup Sink and AquaBrass Delfino Faucet Set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$33
Pro-linkup Sink & AquaBrass Delfino Faucet Set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
LINKUP Ultra PCIE 4.0 Gen4 Riser Cable Support (for Corsair iCUE PC cases & maybe other cases) by Slegnor
...nother case to check.
the standoffs i used in the case were m3x6mm+6mm.
print settings:
quality: 0.2
infill: 10-20%
material: pla
thingiverse
free
Tevo Tarantula Cable Conduit by JunkYardDawg
...mount the right turn link onto the stock motor linkup and also saddle the stock x carriage linkup to...
thingiverse
free
MOSPEADA RIOBOT-Toynami Beta Adapter by carlosap
...riobot-toynami beta adapter by carlosap thingiverse pretty simple adapter linkup v1.6 update - i added a loop on the...
thingiverse
free
Tevo Tarantula Super X Mod by JunkYardDawg
...carriages as there were flaws in the drag chain linkup i'm printing the altered carriage now and will report...
grabcad
free
Linkup Success with Ezeelogix
...ess with ezeelogix"? are you looking for success stories, reviews, or specific features of their products?
www.ezeelogix.com
grabcad
free
Linkup PCIE 4.0 riser cable with mount.
... for the case.
also the cable on the motherboard part is not 100% accurate. it will stick through the pcie holder when attached.
Riser
archibase_planet
free
Riser
...riser
archibase planet
tread rise stair riser riser
stair riser - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$29
riser
...ty free 3d model riser for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1399347)
turbosquid
$29
riser
...ty free 3d model riser for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1399325)
turbosquid
$29
riser
...ty free 3d model riser for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1399318)
archive3d
free
Riser 3D Model
...read rise stair riser riser
stair riser - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$29
press riser
...e 3d model press riser for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1399322)
turbosquid
$29
press riser
...e 3d model press riser for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1399315)
turbosquid
$29
Retail Fixture Riser
...l retail fixture riser for download as c4d, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1659256)
3d_export
$80
Lower marine riser package cap 3D Model
... cap ship oil rig drilling offshore platform gulf mexico petroleum
lower marine riser package cap 3d model tartino 25366 3dexport
3d_export
$13
ROPE WINCH WINDLASS TURNSTILE HOIST LIFT ELEVATOR RISER
...antasy and other medieval games. - fbx + obj + 3ds formats inluded. - no visible repetitions of texture pattern or mirror effect.
Adapter
3d_export
$10
Adapter 3D Model
...adapter 3d model
3dexport
adapter
adapter 3d model mur 20260 3dexport
archive3d
free
Adapter socket 3D Model
...dapter socket adapter
adapter socket n090211 - 3d model (*.3ds) for interior 3d visualization.
turbosquid
$400
cell adaptation
...
royalty free 3d model cell adaptation for download as blend on turbosquid: 3d models for games, architecture, videos. (1701655)
archive3d
free
Adapter 3D Model
...ups pc equipment
adapter extron n180813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$5
usb adapter
...royalty free 3d model usb adapter for download as ige and stl on turbosquid: 3d models for games, architecture, videos. (1582234)
turbosquid
$15
Power adapter
...free 3d model power adapter for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1510024)
turbosquid
$8
USB adapter
...e 3d model usb adapter for download as max, fbx, obj, and dwg on turbosquid: 3d models for games, architecture, videos. (1713542)
turbosquid
$30
adapter.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Nokia Adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Universal adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
0
turbosquid
$12
Calligraphic Digit 0 Number 0
...hic digit 0 number 0 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389318)
3d_export
$6
set-0
...set-0
3dexport
turbosquid
$6
hedge 0
...yalty free 3d model hedge 0 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1450353)
turbosquid
$5
Nuber 0
...oyalty free 3d model nuber 0 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1564674)
turbosquid
$22
0.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Steam Locomotive Fowler 4F 0-6-0
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Liquid Number 0
... model liquid number 0 for download as c4d, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1689919)
turbosquid
$45
Dragon360_perspShape_tmp.0.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Rocks Debris 0
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$18
wood-guardrail-fence 0
...wood-guardrail-fence 0
3dexport
wood-guardrail-fence 0<br>3ds max 2015
4
turbosquid
$9
Office Chair 4-4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
doors- 4
...doors- 4
3dexport
doors 4
3d_export
$5
hinge 4
...hinge 4
3dexport
hinge 4
3ddd
$1
Штора №4
...штора №4
3ddd
штора №4
3d_export
free
playstation 4
...playstation 4
3dexport
playstation 4
turbosquid
$1
re 4-4 electric locomotive
... free 3d model re 4 4 electric locomotive for download as obj on turbosquid: 3d models for games, architecture, videos. (1707845)
3ddd
$1
nexus 4
...nexus 4
3ddd
lg , телефон
nexus 4
3ddd
$1
4 Poufs
...4 poufs
3ddd
пуф
4 soft poufs
turbosquid
$12
Calligraphic Digit 4 Number 4
...hic digit 4 number 4 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389332)
3ddd
$1
Dauphin 4+
...dauphin 4+
3ddd
кресло
dauphin 4+ конференц кресло