Sliders/Carriage for Delta Kossel 2020 Original Wheels and Openbuilds Part Store V Wheels by sysimgrp

Last crawled date: 3 years, 1 month ago

Sliders for 2020 extrusion and Openbuilds Part Store Solid V Wheel kit. This is an adaptation of many designs for sliders that I have seen. This is a two part slider with the front (inside) piece capable of mounting any carriage with 20 mm x 20mm screw spacing for 3mm screws. There is a screw to adjust the wheel tension on the extrusion. The slider is sized for the regular 2020 extrusion that comes with the Kossel 2020 printer kit from Folgertech. I don't know how this would work with the V-slot extrusion. I am using the carriage design that came with the kit except that I have added a hole for an adjustment screw on the top to make end stop settings more precise.
Based on requests, I have modified the design to work with the Mini V Wheel. I have not tested this as I do not have the mini V wheels. I adjusted the bolt axle spacing based on the published diameters of the two types of wheels. You will have to provide your own spacers or modify the sketchup files. Please leave me a comment if you try the mini v wheel sliders and they work or don't work..
Update: Added .stl and .skp files for carriage with extended belt attachment studs. This allows the belts to be aligned with the pulleys.
Update: Added .stl and .skp files for sliders that work with the original nylon wheels that come with the kit. Requires 8 mm spacers.
See my Delta 3D printer modification for manual bed leveling and heated glass printing here