Skateboard Vesc holder 4.12 by Superpilsen

Last crawled date: 3 years ago

This is a Flipsky vesc 4.12 holder that lets you fasten the vesc to a flat surface. I used plastic M3 screws with a tab of loctite to keep the board in place. I recommend using a higher temp filament like petg to handle the transistor temperatures. The board is raised up a bit for better cooling underneath. I also made a hole for a plastic strip to clamp down the capacitors. The bracket combined with the vesc gives a solid one piece feel and ensures risk free operation of the vesc. The original vesc shrink rap have to be removed to use the bracket but now it can be plastidipped to make the whole thing water resistant!