Thingiverse

SK450 16mm carbon arm body by zxcvbn

SK450 16mm carbon arm body by zxcvbn

by Thingiverse

Get from Thingiverse

Last crawled date: 3 years ago

SK450 enclosed body with 16mm carbon arms.
Has holes so some SK450 parts will fit.
Not completed yet and a little tight for space for the flight controller, I'm using a Pixhawk lite.
New body with 12mm wide mounts for more internal room, the old one has 20mm wide ones
Added new smaller motor mounts with no leg mounting hole and only 12mm long hole for arm tube with hole for screw 6mm from end same as the new body.
5/6/17
New body (new 450 v3) holes for esc changed from 30mm to 31mm pitch to fit Racerstar RS20Ax4 V2 20a.
Added holes for retract legs (40g Servoless Electric retractable untested waiting to come)
Extra holes for legs just incase.
Moved holes for fpv transmitter (et200) to make room for retract legs.(one each side of retracts
27/05/17
added leg parts that use 4mm carbon rod and use the holes that are for the retracting legs on the body.

Tags

arm body zxcvbn carbon 16mm sk450

Similar models

Leg mounts for 16mm carbon tubes by Googliola

Leg mounts for 16mm carbon tubes by Googliola

...mm carbon tubes by googliola thingiverse compatible with tarot t680 hexacopter and hml 650 retractable folding landing gear skid

Tricopter heck motor mount by dersimon

Tricopter heck motor mount by dersimon

...y dersimon thingiverse this tricopter heck motor mount fits on a 12mm carbon tube. it has mounting holes for common 1804 motors.

F450/TBS long arms holders (16mm carbon tube) by mrdROb

F450/TBS long arms holders (16mm carbon tube) by mrdROb

...l. motor mount requires drilling a hole in 16mm carbon tube arm. if you take the original tarot 650 arm, - hole is already there.

VTX Antenna Mount - Tarot 680 Pro by blazefpv

VTX Antenna Mount - Tarot 680 Pro by blazefpv

...acts on my 680 and this mount fits perfectly in the area above the retracts and rests on the cf attachment plate of the retracts.

Freewing SU35 Front Retract Mount and Gear Support ALL-IN-ONE by CarreraGTSCS

Freewing SU35 Front Retract Mount and Gear Support ALL-IN-ONE by CarreraGTSCS

...quired. you will still need to mark and drill the holes for the retract mounting screws. thank you billyrayx for a nice design!

SK450 extended leg with rod hole and reinforced by ServError

SK450 extended leg with rod hole and reinforced by ServError

...shed faces on this one. v4 lite has slight thinner walls down the leg to compensate for the added weight from the reinforcements.

16mm Carbon tube mounts

16mm Carbon tube mounts

... good battery mounting surface for two batteries. i used petg as it has a little flex which lets it clamp down without snapping.

HML650 landing gear mount by Derfla123

HML650 landing gear mount by Derfla123

...lacement mount for the bottom of your drone use with 16mm carbon leg booms the screw hole spacing on the top plate is 25mm x 27mm

F550 Hex retracts mount by charliepsycho

F550 Hex retracts mount by charliepsycho

...n line with one of the legs and you use the leg mounts to hold it in place. hey presto, no more wobbly retracting landing gear!

Motor mount 16mm tube v3 by maikeru

Motor mount 16mm tube v3 by maikeru

...nt) for horizontal printing -add holes for power wires -tube hole has been enlarged, because v2 did not fit on a 16mm carbon tube

Search for 604719 Similar models

Zxcvbn

Ossum diff by zxcvbn

Ossum diff by zxcvbn

...ossum diff by zxcvbn thingiverse narrow diffs to fit the ossum jeep, to many projects to do anymore at the moment

250 quad by zxcvbn

250 quad by zxcvbn

... thingiverse 250 quad 10mm carbon arms 12amp racestar esc pixhawk lite or pixracer sort of like my unfinished 450-500 quadcopter

BJD high heels by zxcvbn

BJD high heels by zxcvbn

... by zxcvbn thingiverse high heels for ball joint dolls. 1/10 scale had to make the heel fatter so it was printable and stronger.

Servo saver v2 by zxcvbn

Servo saver v2 by zxcvbn

...cvbn thingiverse servo saver made this one, started to print and had an idea for a better one. not tested yet v3 might be better

Beadlock Rim by zxcvbn

Beadlock Rim by zxcvbn

...es with sponge diameter 130mm from banggood. there is a 2 piece split rim and a 1 piece rim, think its easier to use the 1 piece.

Transfer Box by zxcvbn

Transfer Box by zxcvbn

...rse.com/thing:2796844 untested parts needed 3x3x7 bearing x1 4x12x18 bearing x3 6/10/18 added case with different mounting holes.

Ossum transfer box by zxcvbn

Ossum transfer box by zxcvbn

...by zxcvbn thingiverse made this transfer box for the ossum jeep, needs a mount, but i can't make up my mind how to build it.

Planetary Gearbox by zxcvbn

Planetary Gearbox by zxcvbn

...d is more compact and simpler, only needs one bearing 18x12x4mm. might improve the mount after testing. should have a video soon.

Pixhawk Lite case by zxcvbn

Pixhawk Lite case by zxcvbn

...an be mounted with o-rings for vibration isolation. i use a 45 pitch mounting for the other end of the o-ring mounts on the body.

Folding GPS mount by zxcvbn

Folding GPS mount by zxcvbn

... the arm mounting screws on a f450 quad. just the bottom part, i used some air line for the bit on the end of the 4mm carbon rod.

Search for 43 Zxcvbn models

Sk450

SK450 top plate by mastermechanic5

SK450 top plate by mastermechanic5

...sk450 top plate by mastermechanic5 thingiverse top plate for the hobbyking sk450.

Prop guard sk450 by Droneproject

Prop guard sk450 by Droneproject

...prop guard sk450 by droneproject thingiverse prop guard made for sk450. parts of the opendrone project.

SK450 arm by xx4qxx

SK450 arm by xx4qxx

... longer they are out of stock worldwide. so just download this file and print your own, or make some money by printing for others

SK450 GoPro holding device by paddex

SK450 GoPro holding device by paddex

...sk450 gopro holding device by paddex thingiverse gopro holding device for sk450 quad

Landing gear for sk450 quatrocopter by piitti777

Landing gear for sk450 quatrocopter by piitti777

...k450 quatrocopter this landing gear allow to mount camera under the quatrocopter. this part is specially compatible for hk sk450

SK450 Landing Skid 125mm by thescoobmeisterm

SK450 Landing Skid 125mm by thescoobmeisterm

...sk450 landing skid 125mm by thescoobmeisterm thingiverse i needed longer legs for my sk450 dead cat

Hobbyking SK450 higher landing gear by DaWoJnA

Hobbyking SK450 higher landing gear by DaWoJnA

...wojna thingiverse 100mm high landing gear for hobbykings quadrocopter sk450. also fits for the dead cat conversion of the sk450.

SK450 cmos holder, cmos 600tvl by paddex

SK450 cmos holder, cmos 600tvl by paddex

...sk450 cmos holder, cmos 600tvl by paddex thingiverse cmos 600 tvl cam holder for sk450 quad

SK450 Landing Gear by imjohsep

SK450 Landing Gear by imjohsep

...or your sk450 multirotor frame. print with high infill and this model will do the trick at least up until your next hard landing.

SK450 Gopro Mount by zpj

SK450 Gopro Mount by zpj

...it only needs a few nuts and bolts to mount, and can fit any gopro. prints easily with no support or raft, and fits on perfectly.

Search for 60 Sk450 models

16Mm

16mm Core Adapter by 16mm

16mm Core Adapter by 16mm

...hingiverse customizer. by changing the adjustment variable for the radius, you can tweak this model to fit. buy this version here

16mm Dice

...16mm dice thingiverse 16mm dice with numbers on each side.

16mm to 16mm shaft holder

16mm to 16mm shaft holder

...ncept and i have designed this holder, which just clips to 16mm shafts. maybe someone could use it with scale change, so enjoy...

confirmat jig 16mm

confirmat jig 16mm

...confirmat jig 16mm thingiverse 16mm

Cube 16mm by Gavin_V

Cube 16mm by Gavin_V

...cube 16mm by gavin_v thingiverse 16mm cube

rail 16mm by mic

rail 16mm by mic

...rail 16mm by mic thingiverse rail 16mm

abrazadera 16mm by dafrasth

abrazadera 16mm by dafrasth

...abrazadera 16mm by dafrasth thingiverse abrazadera para tubo de 16mm

16mm Dice by rosen888

16mm Dice by rosen888

...16mm dice by rosen888 thingiverse a simple 16mm dice. used white color to enhance the dots on each side

16mm tube holder by krokus57

16mm tube holder by krokus57

...16mm tube holder by krokus57 thingiverse 16mm tube holder

phone holder 16mm by spezzer

phone holder 16mm by spezzer

...phone holder 16mm by spezzer thingiverse phone holder 16mm

Search for 4325 16Mm models

Carbon

carbonate by Johnwill

carbonate by Johnwill

...carbonate by johnwill thingiverse carbon 3d printing test print out big

carbon atom by TECHB

carbon atom by TECHB

...carbon atom by techb thingiverse carbon atom

Carbon Atom by spuntosoft

Carbon Atom by spuntosoft

...carbon atom by spuntosoft thingiverse carbon atom

Carbon Filter by katzejk

Carbon Filter by katzejk

...carbon filter by katzejk thingiverse carbon filter 14,5

Carbon Nanobelt by senda

Carbon Nanobelt by senda

...carbon nanobelt by senda thingiverse carbon nanobelt i made this using winmostar.https://winmostar.com/

Antena Carbon - deDrones

Antena Carbon - deDrones

...s.es/carbon/ y tambien puedes comprar estas piezas y los kits completos de color enhttps://dedrones.es/product-tag/carbon-extras/

Carbon Dioxyde Molecule by The_Hacker

Carbon Dioxyde Molecule by The_Hacker

...the carbon atom. for the atom of oxygen print it also two times for the both sides. and for the carbon atom print it just 1 time.

Carbon Nanotube by Digi-Kitsamus

Carbon Nanotube by Digi-Kitsamus

...carbon nanotube by digi-kitsamus thingiverse 3d printed carbon nanotube

Activated Carbon Sploof by ThisWasntTaken

Activated Carbon Sploof by ThisWasntTaken

...p with the ring on top. then fill with activated carbon. you can buy activated carbon in most pet stores in the aquarium section.

Carbon Filter by RestlessNZ

Carbon Filter by RestlessNZ

...ge. used aluminium mesh from bug screen door to line inside and keep activated carbon in place. made to fit 100mmm high flow fan.

Search for 4596 Carbon models

Body

BODY by nagato

...body by nagato thingiverse body

Feminine body

...feminine body thingiverse body make in zbrush

Body by michaelodonnell500

Body by michaelodonnell500

...body by michaelodonnell500 thingiverse main body of the robot

Ultramarine Body

Ultramarine Body

...ultramarine body thingiverse just a quick ultramarine remix from leprosywins great emoji soldiers (body)

Body for a robot by OverCraft

Body for a robot by OverCraft

...body for a robot by overcraft thingiverse body

Drone Body by lowenski

Drone Body by lowenski

...drone body by lowenski thingiverse drone body

Spinner body by educagenios

Spinner body by educagenios

...spinner body by educagenios thingiverse spinner body

BODY UNKNOW by leonk

BODY UNKNOW by leonk

...body unknow by leonk thingiverse body unknow

Telecaster body by timovbeelen

Telecaster body by timovbeelen

...telecaster body by timovbeelen thingiverse simple telecaster body

sweetie bot body

sweetie bot body

...sweetie bot body thingiverse body of sweetie bot

Search for 17098 Body models

Arm

ARM

...arm thingiverse arm

Myoelectric Arm, Arm portion

Myoelectric Arm, Arm portion

... in attachment for the circuit board and hardware, no socket, but general arm designed to be used with ada hand from open bionics

ARMS!!!!!!! by MJD

ARMS!!!!!!! by MJD

...arms!!!!!!! by mjd thingiverse arms!! now your creation can have arms. got a ball and socket joint, why not an arm too?

Steering Arm

...steering arm thingiverse steering arm

ARM by Zoha

...arm by zoha thingiverse arm for dji

Prosthetic arm

...prosthetic arm thingiverse prosthetics arm 3d printable

Trailing Arm

...trailing arm thingiverse trailing arm for baja truck.

Arm by Prattotyper

Arm by Prattotyper

...arm by prattotyper thingiverse an arm modelled by taehoon kim

Arm Extension for Micro Robot Arm by mingpoo

Arm Extension for Micro Robot Arm by mingpoo

...arm extension for micro robot arm by mingpoo thingiverse an extension that works with the micro robot arm.

Coat of Arms

...coat of arms thingiverse coat of arms - english bolle (bolles) family

Search for 19909 Arm models