Simple SeeMeCNC EZR Struder Mount for AM8, 2020 Extrusion Printer, etc. by unknowdata

Last crawled date: 3 years, 1 month ago

This mount is designed to fit SeeMeCNC EZR Struder with 2020 Aluminium Extrusion. I use this mount on my printer based on pheneeny's AM8 design.
You might not need this mount if you have extra M4 Hammer Nut for 2020 lying around so you could mount the extruder directly on an aluminium profile. However, M5 version is a lot more common here so I have to design this mount to fits my need.
Parts required
2 x M5 10mm Screws
2 x Square M5 Nuts or Slot hammer 2020 M5 Nuts
2 x M4 Screws (Included in extruder kit, but you could replace it with shorter screws if preferred)
V1 is not compatible with Nylock nuts from the kit. It is not required because screw alone can already hold everything tight. So I designed V2 and V3 to keep these nylock nuts but they are twice as thick.
I only ever print V1 of a mount. I will test it later on my second printer.
Note: There is a rectangular hole on the bottom of the mount. Support structure maybe required depends on print orientation.