Thingiverse
Silencer 16 by Bendfv
by Thingiverse
Last crawled date: 3 years, 3 months ago
After much trial and error I finally have a silencer that is better at suppressing then my Silencer 9.2! Designed for .22 lr guns with a .5''-28 thread.
This design takes advantage of 3D printers to produce intricate designs. Unlike the Silencer 9.2 which is just some rounded baffles, this design is complex series of baffles, sieve holes, muffler walls and pachinko pegs. It has an aperture of 8 mm ensuring bullets don't nick the baffles as happens sometimes with the 9.2 if it is not screwed on perfectly straight. Slightly shorter than the 9.2 with the same diameter, slightly higher weight as well.
Sound suppression was tested with a SW Victory with a Ridge-Lite threaded barrel. A Cellphone mic placed <200 yards away through snowy woods was used to record the sound profile. Aguila .22 Super Extra 40 grain ammo was used. Three replicate sound profiles were taken in batches of two (six profiles in total) Comparing unsuppressed, silencer 9.2 and silencer 16. Unsuppressed was and average of 48.58 db, 50.5 db Max. Silencer 9.2 was 36.48 db Ave and 39 db Max, Silencer 16 was 35.75 db Ave and 38 db Max.
Silencer 16.2 improves performance, blocking vent holes improved sound suppression, so vent holes removed in the model, as well as added sound absorbing teeth. Achieved up to 100% sound reduction on version 16.0, or up to 3 db sound reduction. So when I tested unsuppressed and got an average of 56.5 db, I got 43.2 db with 16.0 and 40.2 db with version 16.2.
Over 50 rounds have been shot through this design without it blowing apart or suffering any more damage than carbon-lead soot build up and searing of the baffles. Obviously a plastic suppressor can't be cleaned and is to be thrown away once worn out. PLA plastic is what this was built with, which is biodegradable.
This design takes advantage of 3D printers to produce intricate designs. Unlike the Silencer 9.2 which is just some rounded baffles, this design is complex series of baffles, sieve holes, muffler walls and pachinko pegs. It has an aperture of 8 mm ensuring bullets don't nick the baffles as happens sometimes with the 9.2 if it is not screwed on perfectly straight. Slightly shorter than the 9.2 with the same diameter, slightly higher weight as well.
Sound suppression was tested with a SW Victory with a Ridge-Lite threaded barrel. A Cellphone mic placed <200 yards away through snowy woods was used to record the sound profile. Aguila .22 Super Extra 40 grain ammo was used. Three replicate sound profiles were taken in batches of two (six profiles in total) Comparing unsuppressed, silencer 9.2 and silencer 16. Unsuppressed was and average of 48.58 db, 50.5 db Max. Silencer 9.2 was 36.48 db Ave and 39 db Max, Silencer 16 was 35.75 db Ave and 38 db Max.
Silencer 16.2 improves performance, blocking vent holes improved sound suppression, so vent holes removed in the model, as well as added sound absorbing teeth. Achieved up to 100% sound reduction on version 16.0, or up to 3 db sound reduction. So when I tested unsuppressed and got an average of 56.5 db, I got 43.2 db with 16.0 and 40.2 db with version 16.2.
Over 50 rounds have been shot through this design without it blowing apart or suffering any more damage than carbon-lead soot build up and searing of the baffles. Obviously a plastic suppressor can't be cleaned and is to be thrown away once worn out. PLA plastic is what this was built with, which is biodegradable.
Similar models
thingiverse
free
Silencer 9.2 by Bendfv
...sor can't be cleaned and is to be thrown away once worn out. pla plastic is what this was built with, which is biodegradable.
grabcad
free
Miniature Vise
...grabcad
mini vise modelled with a cosmetic thread.
suppress or unsuppressed the mate labelled "supress" for movement.
thingiverse
free
cz 200 pcp sound moderator by dylo
...cz 200 pcp sound moderator by dylo
thingiverse
silencer has internallypronted baffles
thingiverse
free
Octagonal Airgun Silencer by Qyuubi786
...ot fit on some printers. so i wont make more than a 5 baffle silencer
you will need to tap the adapter using a 1/2" unf tap.
cg_trader
free
Compensator Sound level reduction silencer and suppressor
...compensator sound level reduction silencer and suppressor
cg trader
model silencer manufactured in 2012-2013.
thingiverse
free
Airgun Suppressor for LCS SK-19 by euler357
...clean up the threads with an m12x1.0mm tap
intended for airgun use only
for more info about my setup:https://cockrum.net/3dp.html
3dwarehouse
free
Large Engine Air Filter Intake and Exhaust Silencer
...d exhaust silencer
3dwarehouse
large engine air filter, intake silencer, and exhaust silencer 16' intake and 22' exhaust
thingiverse
free
Air Venturi Avenger air stripper, baffles by tomcat0987
...lf] i got 4 baffles to fit inside.
updated 3-23-21; made baffle a little longer and wider. improves sound reduction.still 4 fits.
thingiverse
free
gamo air rifle silencer by irishfrog
... the one piece baffle seems to work better backwards
printed baffle in bright orange so you can see it through the holes in front
3dwarehouse
free
HVAC Baffle Box
...t twice the area of the area of the duct. #baffle #baffle_box #duct #home_theater #hvac #rod_gervais #soundproofing #studio #vent
Bendfv
thingiverse
free
Silencer 9.2 by Bendfv
...sor can't be cleaned and is to be thrown away once worn out. pla plastic is what this was built with, which is biodegradable.
thingiverse
free
BR-7 Multi-Stage Rocket by Bendfv
...eras, these ~24 mm wide cube shaped cameras cost just $10~$15 (jan '20) off the internet and turn out to be reasonable tough.
Silencer
turbosquid
$5
Silencer
...alty free 3d model silencer for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1288625)
turbosquid
$45
silencer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Silencer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
silencer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Silencer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Silencer 3D Model
...silencer 3d model
3dexport
silencer
silencer 3d model sargent99 63624 3dexport
3d_export
$10
Silencer 3D Model
...ssault rifle sniper machine gatling gun pistol handgun weapon game ready gameready
silencer 3d model martialartist 22621 3dexport
turbosquid
$5
Silenced Revolver
...e 3d model silenced revolver for download as ma, max, and fbx on turbosquid: 3d models for games, architecture, videos. (1355044)
turbosquid
$9
Silencer V5
...3d model silencer v5 for download as blend, obj, dae, and fbx on turbosquid: 3d models for games, architecture, videos. (1711483)
turbosquid
$9
silencer v4
...3d model silencer v4 for download as blend, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1711410)
16
3ddd
$1
Bed 16
...bed 16
3ddd
постельное белье
bed 16.hope you like it.thanks you very much
design_connected
$4
Bolla 16
...bolla 16
designconnected
gervasoni bolla 16 coffee tables computer generated 3d model. designed by michael sodeau.
3d_export
$6
tap-16
...tap-16
3dexport
3d_export
$6
set-16
...set-16
3dexport
3ddd
$1
16 Mobilier ALIXE
... уличная , мебель
производитель: 16 mobilier
модель: alixe
3ddd
$1
Curtains 16
...curtains 16
3ddd
ламбрикен
curtains 16
polys: 350077
other models:http://3ddd.ru/users/brast/models
turbosquid
$199
F-16
...16
turbosquid
royalty free 3d model f-16 for download as max on turbosquid: 3d models for games, architecture, videos. (1188169)
turbosquid
$128
DF-16
...6
turbosquid
royalty free 3d model df-16 for download as max on turbosquid: 3d models for games, architecture, videos. (1660349)
turbosquid
$40
cottage 16
...bosquid
royalty free 3d model cottage 16 for download as max on turbosquid: 3d models for games, architecture, videos. (1377002)
turbosquid
$20
Decor 16
...urbosquid
royalty free 3d model decor 16 for download as stl on turbosquid: 3d models for games, architecture, videos. (1676913)