Shower head holder by friedPotat0

Last crawled date: 3 years ago

This is a completely functional shower head holder replacement for showers with a rod diameter of 22 mm. The shower head can be plugged into the holder which is designed for heads with a lower diameter between 20.36 mm and 23.50 mm (getting smaller on the bottom side). The holder is mounted with 13 teeth to the clamp for angle adjustments of the head by unscrewing the thumb nut and rotating the holder. You can also replace the thumb nut with a normal hex nut if there is no need for later adjustments. The clamp itself can be moved up and down on the shower rod and will be tightened by another thumb screw. You will notice that there is a hex nut in between the clamp which is used to stop the leading screw from rotating during the thumb nut rotation.
Please look up the exact dimensions in the sketch.pdf and check the compatibility with your shower head before printing the parts.
I hope this part will help others after breaking their shower parts or at least function as a design idea to create your own holder ;).