Shelf wall mount compatible with closetmaid by Mattao

Last crawled date: 3 years, 1 month ago

I recently did shelving in my house and thought, Hey! I can print those! So here they are Shelf mounts that fit with Closet Maid racks sold by the homedepot. Print 100 fill for strength I made mine .3mm White PLA to match the ones I got at the store. 1.5 hours for the mount, 13 min for each pin. Drill 1/4 inch holes into dry wall, place mount over holes, place pins in holes. You will have to supply the nails that go in the center of the pins. They are 33.6 mm long, 3.75 mm thick with a 6 mm head. If you need to, use a block of small wood to brace them when hammering the nails in