Shark Byte | Five33 Switchback Pro Canopy / Pod by rquellet

Last crawled date: 2 years, 10 months ago

Work in progress - needs stiffening to reduce vibrations
Pod to mount Shark Byte VTX-S on Switchback Pro
Designed to allow mounting the whoop board inside the very small Switchback Pro. I also wanted to fit a large micro-sized camera/M12 lens inside for better picture quality. Choose between different camera angles - I've only tested the 45deg variant
Printing
Print in downloaded orientation
Use Cura Tree Supports
0.2mm, 3 walls
Installation
Cut stack screws down to 21mm to make clearance for the VTX-S mounted to the underside of the canopy.
Use 4 M2 screws to mount VTX-S
Place 2 M3 nuts inside hex-cutouts at front mounting holes
Customize it to your liking!
Design is fully parametric - change any number of variables at top of design tree to adapt this to a different frame or camera:https://cad.onshape.com/documents/75ae699a2132a4132cb4ed0f/w/e0a499b2554ad9ca201badff/e/53e67ceaebb9caa1ed299b68
Create free "hobbyist" account on Onshape to edit:https://www.onshape.com/en/products/free