Settings Test Tower by Squrkk

Last crawled date: 3 years ago

Work in progress.
This is a tower used to test different settings (e.g. temp, speed, layerheight) in one print. Must use a slicer capable of multiple sets of settings in one print (like Simplify3D), manually edit gcode files, or change settings on the printer manually during the print for desired test.
The tower has 5 sections each 10mm high.
Version 2 of the tower features:
-Small bridging test (cutouts 10mm & 5mm long)
-45 degree overhang test
-Letter test (1mm)
Version 3 of the tower adds the following features:
-Small tower test
-Stringing test (between main tower and small tower)