Thingiverse
Servo Arm - Longer (5cm - 500mm) by rcdesigna
by Thingiverse
Last crawled date: 3 years, 1 month ago
Thanks to the designer for the upload :)
The arm was 350mm (3.5cm) and was to short for the setup I am using so i increased to just under 500mm (5cm). I attached to my car with 2mm x 7mm self tapping screws.
I was also going to print the servo holder. But as i was running out of filament i just drilled the holes in the original one.
14/3/17 - I have just uploaded pictures of the actual print.
The arm was 350mm (3.5cm) and was to short for the setup I am using so i increased to just under 500mm (5cm). I attached to my car with 2mm x 7mm self tapping screws.
I was also going to print the servo holder. But as i was running out of filament i just drilled the holes in the original one.
14/3/17 - I have just uploaded pictures of the actual print.
Similar models
grabcad
free
servo driven robotic arm 3D print
...servo driven robotic arm 3d print
grabcad
just something i draw for 3d printing
thingiverse
free
Robot Micro Servo Arm by yeyeto2788
...the arm. put them all together and and just deciding which gripper to use.
uploaded some pictures.
p.d: sorry for my english.
thingiverse
free
Servo Arm by ruv_en
...ll and tight on 5mm servos. it has no tooth but you can just push it on the servo and use a screw to hold it.
hope you like it
thingiverse
free
Eachine E160 Helicopter 3D printed arm servo arm by danzig483
...eachine e160 helicopter 3d printed arm servo arm by danzig483
thingiverse
eachine e160 helicopter 3d printed arm servo arm
thingiverse
free
F450 Yi 4k Gimbal sg90 by nik012003
...njoy!
i printed this servo arm https://www.thingiverse.com/thing:348754 and then i cut off the excess.
happy printing and flying!
thingiverse
free
Arduino-Controlled Servo Arm by d_goodman
...rvos, so i printed some linkages and did up some code in arduino and matlab to run the arm using the joystick shield for arduino.
thingiverse
free
robotic hand servo controlled fingers by Hatsyflatsy
... that hand for this project. just need to print the wrist adaptor. this makes it compatible with the lower arm from this project.
thingiverse
free
Servo Arm Extension Single 19.5mm by Jabird73
...tension single 19.5mm by jabird73
thingiverse
just a simple single servo arm extension. use with round arm, or use as a doubler.
thingiverse
free
Servo Arm Extension Double 19.5mm by Jabird73
...servo arm extension double 19.5mm by jabird73
thingiverse
just a simple servo arm, use it on a round wheel or as a doubler.
thingiverse
free
MG995 servo-arm for MK2 robotic arm by acarpe13
...servo-arm i created for the mk2 robotic arm project because the horns and arms included with my mg995 servos were not compatible.
Rcdesigna
thingiverse
free
RC Drill Press by rcdesigna
...mine i put 3mm screws and nuts on.
please note: this is not 100% perfect as i have not had to much experience designing.
enjoy :)
thingiverse
free
Gear box 540 parts_split by rcdesigna
...iverse
i was having trouble printing the gear box 540 parts. so split up. hope this help some one else like it helped me. thanks
thingiverse
free
Open RC Tractor Servo Holder Height by rcdesigna
...
thingiverse
when i printed the servo mount for my tractor the battery kept hitting it. so i cut the top down so it fits better.
thingiverse
free
FrontTongue - Edit by rcdesigna
...d the original design here - http://www.thingiverse.com/thing:2210380
12/6/17 - printed great. glued and plastic welded together.
thingiverse
free
Lamp Single files (Some) by rcdesigna
...them out. i hope this helps others like it did me.
you can fine the original design here = http://www.thingiverse.com/thing:27062
thingiverse
free
Pit Crew Member Half by rcdesigna
...i imported into 123design and cut in half.
will upload print in the next day or two once complete
1/4/17 - all done and photo up.
thingiverse
free
LongNeck Mount Cut In Half by rcdesigna
... on the middle plates. i have not printed this yet so have no idea if it works and is strong enough. will upload print once done.
thingiverse
free
Main Rail - Right by rcdesigna
...ed in free cad.
please note: this is not 100% level (on the deck) as i could not figure it out. hopefully this help someone else.
thingiverse
free
1/14 Engine by rcdesigna
...;t included, i just used these as a reference. also i didn't use the blocks as mine was nice and tight sitting over the motor
thingiverse
free
RC Jack by rcdesigna
...he handle as there is some movement there.
enjoy :)
27/10/16 - i have just uploaded better quality photos of the completed model.
5Cm
3ddd
$1
Люстра Osgona
...osgona , lightstar люстра osgona 790031, bronze d27 h58-158 (+-5cm ...
3d_export
$15
zip fastener for outerwear with 5cm teeth rows
... mesh has the same number of polygons as the original mesh, therefore its resolution may be insufficient for quality 3d printing.
3ddd
$1
Anna G. Miniature Corkscrew
...chrome-plated zamak designed by alessandro mendini dimensions: 9.7cm x 5cm x...
3ddd
$1
clock karlsson discrete
...environment will be come a statement. diameter 36cm height 5cm design by chantal...
3d_export
$9
electric plug
...general model is built to real-world scale dimensions: width: 5cm depth: 3,6 cm height: 5cm pin diameter: 0,48cm size...
3d_export
$5
walkie talkie
...consists of 14666 faces and 15715 vertices. -model dimensions: 5cm x 3.8cm x 24.2cm -units in all formats:...
3d_export
$19
slim beverage can ending with lid
...dimension mm: 50mm x 50mm x 6mm<br>- dimension cm: 5cm x 5cm x 0.6cm<br>- dimension inches: 1.96" x 1.96"...
3d_export
$14
microwave
...width: 50cm depth: 38cm height: 27cm plug dimensions: width: 5cm depth: 3,6 cm height: 5cm pin diameter: 0,48cm size...
3d_export
$13
electric teapot
...width: 21cm depth: 16cm height: 26cm plug dimensions: width: 5cm depth: 3,6 cm height: 5cm pin diameter: 0,48cm size...
3d_export
$19
Spray bottle 01
...5 edges: 0<br>object:<br>- dimension cm: 5cm x 5cm x 19.5cmlt;br>- dimension inches: 1.95" x 1.95" x 7.69"<br>- model parts:...
500Mm
turbosquid
$1
Rectangular Tiles (500mm x 200mm)
...s (500mm x 200mm) for download as max, 3ds, dxf, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1597872)
turbosquid
$2
Wood and steel spice rack 500mm long
...odel wood and steel spice rack 500mm long for download as rfa on turbosquid: 3d models for games, architecture, videos. (1298321)
3ddd
$1
Ligne-roset. Hyannis port
...720mm d: 1600mm filing: h: 541mm w: 481mm d: 500mm secretaire: h: 1435mm w: 500mm d:...
3ddd
$1
Ago 65110
...производитель: giorgetti _http://www.giorgetti.eu _ модель: ago 65110 размеры: w-500mm, d-500mm ...
3ddd
free
ST Luce
...luce (italy) art. sl881.503.05 h=588mm d=588mm art. sl881.505.01 h=500mm d=500mm ...
3ddd
$1
SO2
...so2 3ddd peter ghyczy l=550mm; w=500mm ...
3ddd
$1
Tiffany Floor
...tiffany floor 3ddd tiffany торшер tiffany floor d 500mm h...
3ddd
$1
Chelsea
...3ddd раковина , chelsea basin height: 800mm basin width: 500mm basin depth:...
3ddd
$1
Пуф Mantellassi Margot
...casa , gioiello margot , пуф height 460mm, diameter 500mm ...
3ddd
$1
люстра Shoal 388 (lozenge)
...unglazed english fine bone china. dimensions: 1200mm (47”) length, 500mm (20”) width, 500mm (20”)...
Servo
turbosquid
$30
Servo
...d model servo for download as obj, blend, dae, stl, and sldpr on turbosquid: 3d models for games, architecture, videos. (1394011)
3d_export
$5
servo motor
...tor
3dexport
it's a simple part of servo motor 0.75kw for used in machines assembly to show specified motor in own project.
turbosquid
$1
Servo Moter
...quid
royalty free 3d model servo moter for download as blend on turbosquid: 3d models for games, architecture, videos. (1650816)
turbosquid
free
Motor/Servo
...osquid
royalty free 3d model motor/servo for download as obj on turbosquid: 3d models for games, architecture, videos. (1522522)
turbosquid
$60
Servo Skull
...
royalty free 3d model servo skull for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1318573)
3d_export
$5
Servo 3D Model
...rvo 3d model
3dexport
servo
servo 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl pasqualesiciliano 104590 3dexport
turbosquid
$50
Servo Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
Servo Motor
...model servo motor for download as 3ds, max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1324153)
turbosquid
$29
Servo Set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
machine servo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Longer
3ddd
$1
Longer, patio chair
...
3ddd
лежак , шезлонг
3d model by smanzerdesign.com
for comercila and private use.
enjoy
3d_export
$5
island
...island 3dexport this is no longer just a small island, but a whole location for...
3ddd
$1
All sorts of glass and Riva 1920
...set as vrayblendmat with layers- these shaders may render longer than simple vray mats. important: bercon maps neccessary for...
3d_export
$90
nostromo engineering corridor
...handle. the corridor can be cloned to make it longer ...
3d_export
$12
bird cage
...too small, improper shape, using unsafe materials or construction. longer good quality cages designed for pet birds are more...
3d_export
$15
Castle Island
...a narrow strip of land and is thus no longer an island. it has been the site of a...
3d_export
$5
olive tree branch 6
...height cable: 1.2m / 3.93ft long (we can customise longer cables, please email us to enquire)...
3ddd
$2
Pierre Paulin Pre-Study 444 Lounge Chair
...are build as vrayblend materials which may result in longer render...
3d_ocean
$15
Destroyed House
...war, or riots, and has been abandoned for a longer time now. model is...
3ddd
$1
Rhino sculpture by Tanaka Isamu 1959
...vrayblendmaterial with layers and highres bitmaps- this may cause longer render times than when simple vraymtrls are in...
Arm
archibase_planet
free
Arm
...ase planet
arm hand right hand skeleton
arm human skeleton right arm n030515 - 3d model (*.gsm+*.3ds+*.max) for 3d visualization.
3ddd
$1
arm chair
...arm chair
3ddd
arm chair , пуф
arm chair
turbosquid
$5
arm
...arm
turbosquid
royalty free 3d model arm for download as obj on turbosquid: 3d models for games, architecture, videos. (1306158)
turbosquid
free
Arm
...arm
turbosquid
free 3d model arm for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1346955)
turbosquid
$29
Arm
...osquid
royalty free 3d model arm for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1382436)
3d_export
$5
coat of arms
...coat of arms
3dexport
coat of arms
3ddd
$1
ARM SOFA
...arm sofa
3ddd
arm sofa
3ddd
$1
Arm chair
...arm chair
3ddd
arm chair
3ddd
$1
Arm chair
...arm chair
3ddd
угловое
arm chair
3ddd
$1
ARM CHAIR
...arm chair
3ddd
arm chair clothes