Thingiverse
Semi rigid UHF dipole SMA mount. by iPeel
by Thingiverse
Last crawled date: 3 years, 1 month ago
Used to provide a mounting point for the counterpoise of a dipole.
Use 1.2mm derailleur cable for each element and cut to 158mm. For the driven element, this dimension is from the point where the cable leaves the end of the shield. The counterpoise should be soldered as close to the top of the SMA shield as possible, it helps to file a bit of material away before soldering.
Once the cables are soldered, slip the thing over the counterpoise and glue it to the SMA socket with ca glue, it helps to file a little away from the sides of the SMA plug to get a good glue joint.
Use 1.2mm derailleur cable for each element and cut to 158mm. For the driven element, this dimension is from the point where the cable leaves the end of the shield. The counterpoise should be soldered as close to the top of the SMA shield as possible, it helps to file a bit of material away before soldering.
Once the cables are soldered, slip the thing over the counterpoise and glue it to the SMA socket with ca glue, it helps to file a little away from the sides of the SMA plug to get a good glue joint.
Similar models
thingiverse
free
dipole mount: through fuselage by Implicit
...le mount: through fuselage by implicit
thingiverse
dipole antenna mount, designed for the sma cable coming through the fuselage.
thingiverse
free
Turnigy9X mounting arm adapter, Orange OpenLRS holder and UHF dipole antenna support. by CaptainObvious
..., place them inside one of the halves, insert the 3mm plastic tubing over each dipole element and glue the other half with epoxy.
thingiverse
free
Splice Jig by EelAudio
...cold wires.
put the jig into position and then solder the shield wire over them.
seal up with heat shrink (glue filled preferred)
thingiverse
free
Pagoda 2 antenna cover by tozes
...bs and before the sma connector.
use a bit of ca glue to hold the cover to the top pcb on the top and to the cable on the bottom.
thingiverse
free
Dipole shield for 868MHz LR system by ST61
...dipole shield for 868mhz lr system by st61
thingiverse
designed for rg402 coax cable and dipol awg18 wire.
thingiverse
free
Dipole Feed Point by bmonty
...cess setting this up on a 40' spiderbeam mast with the dipole as inverted v. antenna elements i use are 18 awg speaker wire.
thingiverse
free
Geprc Gep - KX5 Elegant Rear Antenna +xt60 Mount by baboon99
...s receiver mounting
antenna hole is for dipole type straight from vtx.
added a sma version to.
not printed so please report back.
thingiverse
free
Xilo Phreak Antenna Mount - Dipole by LocoBeeFPV
...le is in the correct orientation for printing. use supports.
g code file works flawlessly on ender 3 with sainsmart tpu filament.
thingiverse
free
Taranis X9D Case SMA Antenna Adapter by NorcoT
...rglue or cyano to glue the bulkhead connector into the mount, and to glue the mount cap on. once set it forms a very rigid mount.
thingiverse
free
Balun Case
...d 1:9 balun. use super glue to assembly case.https://nl.aliexpress.com/item/32972573085.html?spm=a2g0s.9042311.0.0.1ec64c4d60jnwn
Ipeel
thingiverse
free
Oversized Light Pull by iPeel
...
thingiverse
this is a light pull for bathroom ceiling switches that's a little larger than normal, i quite like the effect.
thingiverse
free
Fillet Measure by iPeel
...ween 2 and 5mm.
at the moment i've had no call to do anything outside those dimensions, but when i do i'll add them here.
thingiverse
free
H2OLabs Distiller Foot by iPeel
...les the existing foot on the bottom of the distiller to make them sturdy when in use.
i printed in abs for extra heat protection.
thingiverse
free
JR Module with 5 pin connector exposed. by iPeel
...s the bay nicely when you use an external uhf system. a 5 pin dupont connector slides into the hole that exposes the pins snugly.
thingiverse
free
Floor stand for small speakers by iPeel
... the stand is 132mm at the back and 155mm at the front. the speaker platform is 100mm square. the base is 145mm wide, 130mm deep.
thingiverse
free
Xaiomi Yi Chest Mount by iPeel
...oles so you can access the card slot and connectors without removing the mount.
i used some spare 25mm straps i had lying around.
thingiverse
free
Coffee filter holder for digital scales by iPeel
...base is designed to fit exactly the footprint of these scales, and i stuck the base to the scales using double sided carpet tape.
thingiverse
free
RC Wing / Plane Wall Bracket by iPeel
...ifferent models it seems to work well both for wings that lay flat and also that have a fuselage that protrudes beneath the wing.
thingiverse
free
Ceiling / wall bracket for MikroTik hAP ac lite by iPeel
... to be removed and replaced without the lugs breaking.
the source files are included in case you need to tweak the interferences.
thingiverse
free
Turnigy SK3 6374 192kv fan for longitudinal operation by iPeel
...otor doesn't overheat.
this may well fit other 6374 size turnigy motors but has only been tested to fit on the 192kv variant.
Uhf
turbosquid
free
UHF Satellite
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$69
UHF Military radio system3d model
...tudio
.3ds .c4d .lwo .obj - uhf military radio system 3d model, royalty free license available, instant download after purchase.
cg_studio
$45
UHF Military data radio3d model
...gstudio
.3ds .c4d .lwo .obj - uhf military data radio 3d model, royalty free license available, instant download after purchase.
3d_export
free
Download free US UHF Satellite 3D Model
...ency communication satellite truespace cob dxf 3ds obj directx visualmotion
us uhf satellite 3d model visualmotion 64999 3dexport
3d_export
$12
Indoor TV Antenna 3D Model
...model 3dexport tv aerial antenna television reception broadcast signals uhf vhf band indoor radio mast telecommunication digital dipole doublet...
3d_export
$12
TV Aerial 1 3D Model
...model 3dexport tv aerial antenna television reception broadcast signals uhf vhf band outdoor radio mast log periodic yagi-uda yagi...
cg_studio
$39
Radio network adapter3d model
...radio network adapter3d model cgstudio electronics vhf uhf radio station system transceiver frequency military very high adapter...
thingiverse
free
MFDLink Rlink UHF Base
...k rlink uhf base
thingiverse
thats a good case for mfd link uhf.
there is a port for receiver as well if you use it as repeater.
thingiverse
free
UHF / PL Connector Cap by nad_22
...uhf / pl connector cap by nad_22
thingiverse
this is just a little cap protecting uhf / pl connects
thingiverse
free
UHF Turnstile antenna holder by Kawobei
...uhf turnstile antenna holder by kawobei
thingiverse
simple x cross to hold uhf turnstile antenna.
Dipole
3d_export
$12
Indoor TV Antenna 3D Model
...signals uhf vhf band indoor radio mast telecommunication digital dipole doublet rabbit ears bipole indoor tv antenna 3d model...
thingiverse
free
Dipole Bracket for wire dipoles by PD5DJ
...e bracket for wire dipoles by pd5dj
thingiverse
wire dipole bracket for 300ohm and 450ohm twinlead..
screws needed are m4 type..
thingiverse
free
Dipol insulator light
...dipol insulator light thingiverse light verion of dipole ...
thingiverse
free
Dipole Insulator by richtma
...dipole insulator by richtma
thingiverse
two variations of a simple dipole insulator.
thingiverse
free
dipole holder by flegi
...dipole holder by flegi
thingiverse
dipole holder for boom 15x15mm and 6mm element
thingiverse
free
Gypsy Dipole Support by EB5TC
...gypsy dipole support by eb5tc
thingiverse
soporte para gypsy dipole.
gypsy dipole support.
thingiverse
free
Dipole holder by Mikx
...dipole holder by mikx
thingiverse
dipole holder for rg 316 and 1mm copper cable.
( with rafts for printing in abs )
thingiverse
free
433MHz dipole antenna by Tamadite
...433mhz dipole antenna by tamadite
thingiverse
433mhz dipole antenna
thingiverse
free
Dipole Antenna Support by Amigache
...dipole antenna support by amigache
thingiverse
it is simply a support for dipole antenna, useful
thingiverse
free
Dipole Antenna Isolator by matrhint
...dipole antenna isolator by matrhint
thingiverse
this is a quick and simple part for putting up a dipole antenna.
Sma
3ddd
$1
Sma
...sma
3ddd
sma , комод
модель комода фирмы sma
3ddd
$1
SMA Armonia
...sma armonia
3ddd
sma
спальная мебель sma armonia
3ddd
$1
SMA / Tiffany
...sma / tiffany
3ddd
sma , капитоне
производитель sma, кровать tiffany
3ddd
$1
SMA | Eros
...sma | eros
3ddd
sma
кровать "eros" фабрики "sma"
3ddd
$1
SMA / Sharpey
...sma / sharpey
3ddd
sma
italy
3ddd
$1
SMA
...sma
3ddd
одеяло
italy
3ddd
$1
SMA Diamante
... тумба
производитель - sma. моделил по каталогу. цвет - frassino magnolia. габаритные размеры указаны на превью.
3ddd
$1
Tumba SMA ABBRACCIO
...tumba sma abbraccio
3ddd
тумбочка , sma
tumba sma abbraccio
3ddd
$1
Кровать SMA Cover
...кровать sma cover
3ddd
cover , sma
кровать sma cover с текстурами.
3ddd
$1
Тумбы SMA Armonia
...тумбы sma armonia
3ddd
sma , armonia
комплект тумб для спальни sma armonia.
Rigid
turbosquid
$15
Rigid Bag Filter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Rigid body Cube
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$12
Semi Rigid Rubberduck 3D Model
... tender yacht marine boat rigid bottom inflatable dinghy run-around 38m
semi rigid rubberduck 3d model southdesign 32727 3dexport
turbosquid
$35
Among Us Rigid Character
...among us rigid character for download as blend, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1637362)
3d_export
$15
Rigid Bag Filter 3D Model
...rigid bag filter 3d model
3dexport
filter bag clean air ahu conditioning
rigid bag filter 3d model matvic 85845 3dexport
3d_export
$60
Rabbit Rigid 3D Model
...oe hare burrow long ears pet 3d realistic rigged white brown fur small cute mammal
rabbit rigid 3d model scorpio47 78247 3dexport
cg_studio
$119
Mercedes Antos rigid truck3d model
... .fbx .lwo .max .obj .xsi - mercedes antos rigid truck 3d model, royalty free license available, instant download after purchase.
3d_export
$119
Mercedes Antos rigid truck 3D Model
...os actros van boxtruck trailer heavy daimler german european rigid
mercedes antos rigid truck 3d model fisherman3d 66670 3dexport
3d_export
$50
of a hydrofoil board with a rigid wing sail
...model is made in the form of: hull parts, sail parts, as well as a ballast centerboard and keel.<br>all peace and goodness.
turbosquid
$12
Device for loading and unloading of non-rigid CME roller tracks
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Semi
turbosquid
$65
semi
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$65
Semi 3D Model
...semi 3d model
3dexport
semi
semi 3d model modelix 59728 3dexport
3d_ocean
$19
Semi Truck
...y rim seat semi truck speed truck tyre wheel
detailed 3d model of semi truck. all materials are included. model is ready for use.
design_connected
$10
Semi Lights
...semi lights
designconnected
gubi semi lights computer generated 3d model. designed by bonderup, claus.
3ddd
$1
Gubi Semi Pendant
...gubi semi pendant
3ddd
gubi
gubi semi pendant
turbosquid
$110
Tesla Semi
...bosquid
royalty free 3d model tesla semi for download as obj on turbosquid: 3d models for games, architecture, videos. (1404184)
turbosquid
$99
Tesla Semi
...bosquid
royalty free 3d model tesla semi for download as max on turbosquid: 3d models for games, architecture, videos. (1706688)
turbosquid
free
Semi Truck
...rbosquid
free 3d model semi truck for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1397814)
turbosquid
$400
Semi Truck
...
royalty free 3d model semi truck for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1503399)
turbosquid
$50
SEMI-92
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)