Self-contained Dual Evaporative Air Mister Cooler on Cart w/ Mast - 7'-12' - 8723 CFM - 9kW Gas Gen 3d model
Warning. This content is not moderated and could be offensive.
cigarette
3dmdb logo
GrabCAD
Self-contained Dual Evaporative Air Mister Cooler on Cart w/ Mast - 7'-12' - 8723 CFM - 9kW Gas Gen

Self-contained Dual Evaporative Air Mister Cooler on Cart w/ Mast - 7'-12' - 8723 CFM - 9kW Gas Gen

by GrabCAD
Last crawled date: 1 year, 11 months ago
http://www.larsonelectronics.com/p-147500-self-contained-dual-evaporative-air-mister-cooler-on-cart-w-mast-7-12-8723-cfm-9kw-gas-gen.aspx

Made in the USA

The WAF-ML-AC-2X30-9G self-contained portable evaporative cooling system is an air chiller that combines two non-sparking fans and dry mist technology to cool work areas that do not have access to traditional air conditioning. This portable unit is supported by a manual, crank-style mast on a cart for elevated cooling at heights of 7-12 feet, allowing operators to deploy the air chiller in different locations with ease. Supplying power to the fan is a 9,000-watt gasoline generator with a fuel capacity of 6.5 gallons. The dual air mister is equipped with a 34-gallon tank and two separate water filters to cool the work environment for up to eight hours.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO AIR CHILLERS*

This Larson Electronics evaporative cooling unit uses dry mist technology. The self-contained, dual air chiller ensures that your work environment stays dry while lowering the ambient temperature. With two, 30" fans and eight spray nozzles, this unit is applicable to work areas with smaller access ways. The dual portable cooling system will automatically shut off once the water reservoir is empty, so operators don't need to worry about burning out the pumps.

With two fan units running at 8723 RPM, this portable misting system can chill down any industrial or commercial space in need of a cool down. Since one tank can easily last an entire work shift, there is no need for messy hose connections running throughout the work space. It is designed to be self-maintaining, therefore operators will not need to interrupt their work to replace pads or clean the nozzles.

Features
• Two air chillers for fast cooling
• Enclosed wires and motors
• 30" spark proof blades
• Application of dry mist technology
• Drops temperatures 20-30° Fahrenheit
• Operates up to 8 hours on a single tank
• Automatic pump shutoff when tank nears empty.
• Elevates up to 7-12 feet
• Reaches an area of 3,500 square feet
• 0.7 GPM at 60 PSI
• Eight individual spray nozzles strategically placed around the fan.
• 9,000-watt gasoline generator
• 6.5-gallon fuel capacity w/ 9-hour runtime
• Outlets available for powering equipment on site.

This unit comes with two fans, each equipped with a 30" spark proof aluminum blade, enclosed wires and motors. The fan blades are spark resistant and the unit is easily transportable to various job sites. This entire cooling system can easily be transfered via a wheeled cart.

Mast: The WAF-ML-AC-2X30-9G features an extendable tower that can be adjusted from 7 to 12 feet in height for maximum cooling in hard-to-reach locations or elevated positions. A single hand crank allows operators to easily raise or lower the tower as needed. The tower is constructed of heavy gauge steel for durability, and a tough powder coat finish provides protection against rust and corrosion. The base of the tower is fitted with four solid wheels to allow easy positioning; the operator can simply roll it into the desired location as needed. The flat bed area supports the unit's water tank and other working components.

Generator: This self-contained unit is powered by a 9,000-watt gasoline generator located at the base of the cart. The 15-hp component comes with a fuel capacity of 6.5 gallons and a runtime of 9 hours per load. Operators may start the generator using an electric push button for instant activation. Fuel gauges, automatic voltage regulation and low oil shutdown allows workers to monitor the status of the unit. The following outlets are available for powering other equipment on the work site: (4) 20A 120V 3-prong, (1) L14-30 30A 120V/240V twist lock (1) 30A 120V twist lock and (1) 12V DC cigarette plug-style outlet.

Applications: Oil rig floors, construction sites, tank cleaning applications, cooling hot work sites and more.

Tags