Thingiverse
Sealed Dual Filament Holder by psdesign
by Thingiverse
Last crawled date: 3 years ago
Update: after use and testing I highly recommend that you mount the nozzles up high rather than low, it’s much easier to feed filament through up high.
Update: I had a problem with a spool riding up on the side of the mounts and jamming, so I am adding these washer files, you just add these to the outside of the spools after feeding onto the tube.
Here is a dual Spool holder, it is a great sealed container and easy to make, follow my list of items to purchase below and print and you will have a great sealed spool holder.
It holds 2 spools easily of nearly any size, it feeds out to a larger diameter teflon tube to ensure that there is no friction from the tube.
It has some stoppers you can use to seal off the holes when not in use, and when in use they hang over the valves so you don't loose them.
I just added an end stopper for the teflon tube as well.
I have added links on amazon for all the parts except those you can find at Home Depot or any hardware store.
Purchased
Container https://www.amazon.com/gp/product/B012TSGXVK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1 Snapware 1098437 40 Cup Clear Airtight Food Storage Container With Handle (2-Pack)
Teflon Tube https://www.amazon.com/gp/product/B019Q012C4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 MUYI 10 Meters = 32.8 Feet PTFE Teflon Tube OD 5mm ID 3mm For Chemical Electrical Medical Equipment
Valves https://www.amazon.com/gp/product/B07255XG1N/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 uxcell 10pcs 1/8" PT Male Thread 5mm Push In Joint Pneumatic Connector Quick Fittings
Screws and Nuts need 8 per container 1/4 in - 20 x 5/8
Nuts for Valves need 2 per container 7/16 in - 14
PVC Tube from Plumbing at Home Depot 1ӯ tube cut to 174mm length
Silica Gel Packs https://www.amazon.com/gp/product/B00VJ02VMK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 [30 PACKS] 10 Gram - High Quality Silica Gel Desiccants Dehumidifier 2 1/4 X 3 1/4
3D printed parts
Spool Holder spool rod holderinner.STL
Backing Plate spool holder outer.STL
Stopper stopper.STL
Tube Stopper stopper tube.STL
Mount Spool on large flat side of container centered and 95 mms from bottom of container to bottom of plate.
Mount Valves about 40 mms from bottom of container to center of holes.equally spaced from sides and center.
Let me know if you like it!
If you print and like them please post your photos!
Update: I had a problem with a spool riding up on the side of the mounts and jamming, so I am adding these washer files, you just add these to the outside of the spools after feeding onto the tube.
Here is a dual Spool holder, it is a great sealed container and easy to make, follow my list of items to purchase below and print and you will have a great sealed spool holder.
It holds 2 spools easily of nearly any size, it feeds out to a larger diameter teflon tube to ensure that there is no friction from the tube.
It has some stoppers you can use to seal off the holes when not in use, and when in use they hang over the valves so you don't loose them.
I just added an end stopper for the teflon tube as well.
I have added links on amazon for all the parts except those you can find at Home Depot or any hardware store.
Purchased
Container https://www.amazon.com/gp/product/B012TSGXVK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1 Snapware 1098437 40 Cup Clear Airtight Food Storage Container With Handle (2-Pack)
Teflon Tube https://www.amazon.com/gp/product/B019Q012C4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 MUYI 10 Meters = 32.8 Feet PTFE Teflon Tube OD 5mm ID 3mm For Chemical Electrical Medical Equipment
Valves https://www.amazon.com/gp/product/B07255XG1N/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 uxcell 10pcs 1/8" PT Male Thread 5mm Push In Joint Pneumatic Connector Quick Fittings
Screws and Nuts need 8 per container 1/4 in - 20 x 5/8
Nuts for Valves need 2 per container 7/16 in - 14
PVC Tube from Plumbing at Home Depot 1ӯ tube cut to 174mm length
Silica Gel Packs https://www.amazon.com/gp/product/B00VJ02VMK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 [30 PACKS] 10 Gram - High Quality Silica Gel Desiccants Dehumidifier 2 1/4 X 3 1/4
3D printed parts
Spool Holder spool rod holderinner.STL
Backing Plate spool holder outer.STL
Stopper stopper.STL
Tube Stopper stopper tube.STL
Mount Spool on large flat side of container centered and 95 mms from bottom of container to bottom of plate.
Mount Valves about 40 mms from bottom of container to center of holes.equally spaced from sides and center.
Let me know if you like it!
If you print and like them please post your photos!
Similar models
thingiverse
free
Filament Dry Box
...g5ntfgu/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=utf8&psc=1
spool holder is a remix of https://www.thingiverse.com/thing:2047554
thingiverse
free
Guitar Pickup Winder
...=utf8&psc=1
speed adjustmenthttps://www.amazon.com/gp/product/b07vpnhs5j/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=utf8&psc=1
thingiverse
free
Desk Fan by NebNorse
...lpages04?ie=utf8&psc=1
motor control: https://www.amazon.com/gp/product/b01cnl6imc/ref=od_aui_detailpages04?ie=utf8&psc=1
thingiverse
free
MK3 Camera Mount by infocus
..._o04_s00?ie=utf8&psc=1
flex cablehttps://www.amazon.com/gp/product/b00m4daqh8/ref=oh_aui_detailpage_o04_s00?ie=utf8&psc=1
thingiverse
free
Sonoff Enclosure by JeffLZ
...title_o00_s00?ie=utf8&psc=1
https://www.amazon.com/gp/product/b00qvb6qpu/ref=ox_sc_saved_title_1?smid=atvpdkikx0der&psc=1
thingiverse
free
12 Function Deep Dish Button Box by coyoteyz13
..._title_o03_s00?ie=utf8&psc=1
https://www.amazon.com/gp/product/b07vhcb1q4/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
thingiverse
free
Turntable
...amp;psc=1
m3 screws m3x6 or m3x8https://www.amazon.com/gp/product/b07twz7x38/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=utf8&psc=1
thingiverse
free
Hand Mixer by OM3
...e?ie=utf8&psc=1
power supplyhttps://www.amazon.com/gp/product/b01461mogq/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
thingiverse
free
T- Zero Water Tight Cylinder Version 1 by T_Zero_Systems
...=utf8&psc=1
conformal coat:
https://www.amazon.com/gp/product/b0009h1amg/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=utf8&psc=1
thingiverse
free
Light-Duty Vice by tmt0727
...gc96/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
you need a grease, 1x nut 1x washer, 2x washers and small 2x wood screws
Psdesign
thingiverse
free
Batman Toy by psdesign
...r kids.
made this one with holes for small magnets, but left them out of the file so you can drill to your magnet size.
have fun.
thingiverse
free
50mm Fan Guard by psdesign
...n ingress.
this is for a 50 square fan, i will upload other sizes on request.
if you print and like them please post your photos!
thingiverse
free
Jack O Lantern Stencils by psdesign
...s for halloween pumpkins, eyes, noses, mouthes.
have fun!
scale to your needs
if you print and like them please post your photos!
thingiverse
free
tri-spinner by psdesign
...mp;psc=1
and 22mm bearings like these:https://www.amazon.com/gp/product/b01c9xdpvq/ref=oh_aui_search_detailpage?ie=utf8&psc=1
thingiverse
free
Spacer for Reel Holder for CR-10 by psdesign
...fore and after your filament reel on the cr-10 standard reel holder.
if you like this please post photos of your print in action!
thingiverse
free
Extruder Knob by psdesign
...rrectly, with this one you have much more visibility
if you print this please post your photos
print flat side down, no supports.
thingiverse
free
Glasses Clip for M2 MakerGear by psdesign
...ou get to the machine. i made a glasses clip to attach to the m2, i secured it with a bit of two sided tape, and it works great.
thingiverse
free
sword through body by psdesign
...ut in half, insert each end with a bit of super glue, and you are good to go!
if you print and like them please post your photos!
thingiverse
free
fidget spinner circular by psdesign
...mp;psc=1
and 22mm bearings like these:https://www.amazon.com/gp/product/b01c9xdpvq/ref=oh_aui_search_detailpage?ie=utf8&psc=1
thingiverse
free
Filament Roll Clip by psdesign
...to have them around!
think its perfect now!
let me know how it works for you!
if you print and like them please post your photos!
Sealed
3d_export
$25
seal
...seal
3dexport
seal
archibase_planet
free
Seal
...seal
archibase planet
seal pinniped
seal - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$8
seal
...seal
3dexport
seal swims at sunset, not a high-poly model.
3d_export
$5
seal
... printed on a 3d printer and get a high-quality figure. the seal model consists of simple objects, but it looks very interesting.
turbosquid
$10
Seal
...al
turbosquid
royalty free 3d model seal for download as obj on turbosquid: 3d models for games, architecture, videos. (1261349)
turbosquid
$3
Seal
...
turbosquid
royalty free 3d model seal for download as blend on turbosquid: 3d models for games, architecture, videos. (1388674)
turbosquid
$49
Seal
...osquid
royalty free 3d model seal for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1261541)
3d_export
$25
walrus seal
...walrus seal
3dexport
walrus seal
turbosquid
$29
Seal
...
royalty free 3d model seal for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1487853)
turbosquid
$5
Seal
...lty free 3d model seal for download as c4d, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1549324)
Dual
turbosquid
free
Dual Pistols
...ls
turbosquid
free 3d model dual pistols for download as fbx on turbosquid: 3d models for games, architecture, videos. (1320360)
turbosquid
$2
Dual Axe
...urbosquid
royalty free 3d model dual axe for download as fbx on turbosquid: 3d models for games, architecture, videos. (1332372)
turbosquid
$10
Dual Lesaths
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
плитка Dual Bianco (Испания)
...й плитки venis dual (испания). технические качества: устойчивость к стирания, отличная геометрия, отсутствие проблем при укладке.
turbosquid
$35
Dual Mesh Fonts
...ree 3d model dual mesh fonts for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1352989)
turbosquid
$29
Dual Flask with Bungs
...del dual flask with bungs for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1210512)
turbosquid
$19
Dual Socket Plug
...3d model dual socket plug for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1303912)
turbosquid
$13
Dual Adjustable Pulley
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Amoi N809 Dual
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Dual Turret Tank
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Filament
3ddd
$1
Filament Cage
...filament cage
3ddd
лофт , filament cage
модель бра, делалась по фото!
turbosquid
$3
FILAMENT COUNTER
...d
royalty free 3d model filament counter for download as stl on turbosquid: 3d models for games, architecture, videos. (1563049)
3d_export
$5
Filament lamp 3D Model
...filament lamp 3d model
3dexport
filament lamp 3d model kevin 54161 3dexport
3d_export
$5
Filament bulb candle 3D Model
...filament bulb candle 3d model
3dexport
filament bulb-candle
filament bulb candle 3d model kevin 54163 3dexport
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3ddd
$1
Factory filament metal shade
...factory filament metal shade
3ddd
restoration hardware
restoration hardware. 20th c. factory filament metal shade.
Holder
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.