Scx24 extreme low enter of gravity chassis by Gm1972

Last crawled date: 3 years, 3 months ago

My take on making a extreme low center of gravity crawler chassis for the Axial scx24.
Note that this is currently in progress, but thinking that putting it here could give me some input and to see if there is an interest for me to continue with this.
I felt that the frame rails was a hinder to place the different component in an optimal way, so I made this chassis where I rotated the motor (Barrage) 180 degress and moved it sideways so I could place the battery under and beside the motor to lower the COG.
Personally I have run it without shocks with rubber bands to limit travel of the axles, but I have made mount holes for shocks.
I ran it with the front axle converted to 4-link but all other components are stock c10, or stock c10 lengths at least.
I designed it to have rc4wd scramblers but I never received them so made printed mock ups to try the size, some scraping in the front with the mock ups, but could be mitigated with longer links if you want to go that way.
The wheels on the picture is CR18 Finders that are cut with extre weights inside them with custom dually rims in the back.
The angles it can handle is quite extreme. :-)