Thingiverse
scx10 6x6 HG p601 build
by Thingiverse
Last crawled date: 4 years, 2 months ago
these are some items i made for my HG p601 body on a scx10 6x6. decided to build this for a winter rig to handle some trailing In the deep Alberta snow. its running 2.2 cut mudslingers.I am running 100mm shocks in the front for increased articulation and then 90mm in the back with 10mm lift kit. Rc is running a 3300kv brushless system with a 3660 can motor size. all steel gear transmission and all steel driveshafts.
-the grill has two versions one is screw on and other is glue on. the headlights take 5mm led and you can glue in clear lenses that come from round led pod.
-panhard bar and servo mount. mount screws in behind shock on axles the p601 axles. and panhard mount needs to be screwed through frame. for the panhard bar I hd to put a bend in so it would clear front output shaft.
-the receiver box has a mount to mount onto the side of the frame and then receiver box mount ontop of mount useing m3 bolts and m2 bolts to hold down lid. If you silicon in inside of lid before putting on it will be waterproof
if you are doing one of these builds i recomend searching P601 lots of great items come up.
-the grill has two versions one is screw on and other is glue on. the headlights take 5mm led and you can glue in clear lenses that come from round led pod.
-panhard bar and servo mount. mount screws in behind shock on axles the p601 axles. and panhard mount needs to be screwed through frame. for the panhard bar I hd to put a bend in so it would clear front output shaft.
-the receiver box has a mount to mount onto the side of the frame and then receiver box mount ontop of mount useing m3 bolts and m2 bolts to hold down lid. If you silicon in inside of lid before putting on it will be waterproof
if you are doing one of these builds i recomend searching P601 lots of great items come up.
Similar models
thingiverse
free
Redcat Gen 8 SCX10 Metal Axle Panhard Mount by WrenchToDrive
... hold it in place.
summary and run video: https://youtu.be/zj-lojcs2sw
use at your own risk.
wrench to drive or drive to wrench?
thingiverse
free
HG Fourlink-mount by powerbynowak
...werbynowak
thingiverse
hg p601 only has 3-link to mount the axles. so i designed a mount so you can build a real 4-link instead.
thingiverse
free
scx10 panhard (trackbar) brackets by danman24
...rcadillacsts chassis mounted servo mount thing that enables you to install a panhard bar or track bar on you scx10. please enjoy!
thingiverse
free
HG P601 Servo Mount with Panhard Mount by FourDogs
...ing:2463338
find some of my other models at cults3d.comhttps://cults3d.com/en/3d-model/various/2004-bronco-concept-body-for-scx10
thingiverse
free
HG P601 P402 Dual link & servos support front / rear by G_Factory
...hese are servos support & dual link for front axle & simple support for dual link of rear axle for hg p601 & p402
thingiverse
free
Shocktower for HG P601 6WD by Finntrollet
...ocktower for the hg p601 6x6 1:10 rc crawler.
no bodypost holes, we use neodymmagnet insted, just glue inte on the smal platform.
thingiverse
free
HG P407 Shock Tower by jdebuhr
...rew.
i have not run my p407 as i am in the middle of building it and this was required as i needed to replace the leaking shocks
thingiverse
free
HG P601 P402 Lipo batterie support transverse by G_Factory
... transverse by g_factory
thingiverse
front support under body front transverse.
compatible with hg p601 & hg p402
two length
thingiverse
free
HG-P601 Axle end piece by laaingen
...upport. printing it lying on the side for ekstra strength at the two ends that is the week spot. made and published in thinkercad
3dwarehouse
free
Custom SCX10 SWB Unimog Chassis
...custom scx10 swb unimog chassis
3dwarehouse
chassis based on scx10 rails. 250mm wheelbase. servo mount designed for hg axles.
P601
thingiverse
free
Shocktower for HG P601 6WD by Finntrollet
...ocktower for the hg p601 6x6 1:10 rc crawler.
no bodypost holes, we use neodymmagnet insted, just glue inte on the smal platform.
thingiverse
free
HG P601 P402 Lipo batterie support transverse by G_Factory
... transverse by g_factory
thingiverse
front support under body front transverse.
compatible with hg p601 & hg p402
two length
thingiverse
free
RC4WD Gearbox spacer for HG P601 by Finntrollet
... bracechassithing and install it.
the shafts need to be reemed to 5mm to fit the gearbox, i used a propeller reemer, worked good.
thingiverse
free
HG-P601 Axle end piece by laaingen
...upport. printing it lying on the side for ekstra strength at the two ends that is the week spot. made and published in thinkercad
thingiverse
free
Custom parts HG P601 by Finntrollet
...ll used at 0.2.
and a gearboxspacer to use the rc4wd gearbox (http://store.rc4wd.com/r2-black-crawler-transmission-v2_p_842.html)
thingiverse
free
HG P601 realistic Rear light ( two models by G_Factory
... two models by g_factory
thingiverse
led support to fix led and to be filled with resin or epoxy cristal glue for realistic look
thingiverse
free
HG P601 P402 Dual link & servos support front / rear by G_Factory
...hese are servos support & dual link for front axle & simple support for dual link of rear axle for hg p601 & p402
thingiverse
free
HG P601 P402 Front light ( led support ) by G_Factory
... :https://www.banggood.com/menmax-racing-blitz-x1-mr809100-18-lamp-shade-89012b-p-1066740.html?rmmds=myorder&cur_warehouse=cn
thingiverse
free
HG P601 P402 front wire rack & calender for lexan Body by G_Factory
...p; calender for lexan body by g_factory
thingiverse
for more realistic customisation of mercedes inspired 6x6 and 4x4 lexan body
Scx10
thingiverse
free
wheels for SCX10 by Cnegon
...wheels for scx10 by cnegon
thingiverse
wheels for scx10
thingiverse
free
High Clearance Crawler Front Bumper - SCX10, SCX10 II by Robskii
...nce crawler front bumper - scx10, scx10 ii by robskii
thingiverse
direct bolt-on front bumper for either your scx10 or scx10 ii.
thingiverse
free
SCX10 Türgriff by MonoDani
...scx10 türgriff by monodani
thingiverse
türgriffe für den scx10.
drucken.. bohren.. kleben..
thingiverse
free
Front Bumper SCX10 by Breksys
...front bumper scx10 by breksys
thingiverse
scx10 front bumper
fits on axial scx10 deadbolt. printed and tested.
thingiverse
free
SCX10 / SCX10 II Dual Servo Mount by Robskii
...ervo mount by robskii
thingiverse
cross brace to allow for dual servos to be mounted.
-requires cms
-requires battery relocation
thingiverse
free
Box SCX10 and Other by HappyMaker06
...box scx10 and other by happymaker06
thingiverse
box for scx10 and other...
top, bottom, and cover for battery.
thingiverse
free
axial scx10 bumper by KyleDietrich
...axial scx10 bumper by kyledietrich
thingiverse
fits axial scx10 power wagon, possibly other models
thingiverse
free
Axial SCX10 parts by robertl49
...axial scx10 parts by robertl49
thingiverse
axial scx10 dingo parts
radiator
drivers floor
center console
thingiverse
free
SCX10 Flex and Work Stand by Dungstar
...scx10 flex and work stand by dungstar
thingiverse
scx10 flex and work stand
thingiverse
free
SCX10 hilux truggy grill by imperfect927
...scx10 hilux truggy grill by imperfect927
thingiverse
scx10 hilux truggy grill
Hg
3ddd
$1
HG Eastbourne
...hg eastbourne
3ddd
капитоне
hg eastbourne
3ddd
$1
TERMA AERO HG
...terma aero hg
3ddd
полотенцесушитель , aero
terma radiator aero hg
cg_studio
$99
Hyundai Grandeur (HG) 20123d model
...d .fbx .lwo .max .mb .obj - hyundai grandeur (hg) 2012 3d model, royalty free license available, instant download after purchase.
3d_export
$20
FREGGIA HG 640 VGTB 3D Model
...freggia hg 640 vgtb 3d model
3dexport
cooktop gas stove cook top restart
freggia hg 640 vgtb 3d model felru 99063 3dexport
humster3d
$75
3D model of Hyundai Grandeur (HG) 2012
...d 3d model of hyundai grandeur (hg) 2012 in various file formats. all our 3d models were created maximally close to the original.
turbosquid
$49
AEZ Raise HG Disk Car Wheel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
FREGGIA HG 640 VGTB
...s/builtin/hobs/id_78.html
file's inside:
*.max (uncollapsed modifier list)
*.fbx
*.obj
все материалы для corona.
3ddd
$1
Кресло HG Deco Tub Chair
...глубина: 660 мм
ссылка на сайт:http://www.homeconcept.ru/catalog/section.php?section_id=1685
артикул: h-dec-sa-0041-r
humster3d
$150
3D model of Hyundai Grandeur (HG) with HQ interior 2014
...ndai grandeur (hg) with hq interior 2014 in various file formats. all our 3d models were created maximally close to the original.
3d_export
$10
HG 2 person sofa studio
...~ 100,000 model parts: 1 texture format: .png .jpg resolution: 1024*1024 pbr in substance painter formats: .obj .gltf .fbx .blend
6X6
turbosquid
$65
Chassis 6x6
...free 3d model chassis 6x6 for download as ige, obj, and sldas on turbosquid: 3d models for games, architecture, videos. (1252844)
3d_export
$6
trass stand 6x6
...trass stand 6x6
3dexport
3d_export
$6
6x6 exhibition booth stand
...6x6 exhibition booth stand
3dexport
6x6 exhibition booth stand 3d model
turbosquid
$90
Guarani 6x6 VBTP
...d
royalty free 3d model guarani 6x6 vbtp for download as max on turbosquid: 3d models for games, architecture, videos. (1551166)
3d_export
$100
Pinzgauer 718 6x6 3D Model
...pinzgauer 718 6x6 3d model
3dexport
pinzgauer 718 6x6 steyr puch
pinzgauer 718 6x6 3d model dougmavs 75686 3dexport
3d_export
$15
6x6 Exhibition 3D Model
...d exhibition convention exhibit modern contemporary kiosk stall model stalls space
6x6 exhibition 3d model anyting 35251 3dexport
turbosquid
$100
KTO Rossomak 6x6 Camuflag
... rossomak 6x6 camuflag for download as max, fbx, 3ds, and obj on turbosquid: 3d models for games, architecture, videos. (1606596)
3d_export
$5
IFA L60 6x6 3D Model
...uck trucks transport 6x6 4x4
ifa l60 6x6 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl ccszvnoel1 109124 3dexport
turbosquid
$39
Faun L908 6x6 1958
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
6x6 Exhibition booth stand
...n booth stand 3d model for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1437151)
Build
archibase_planet
free
Building
...building high-rise building office building construction
building n050115 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
building
...building
3dexport
clasic building
3ddd
$1
building
...building
3ddd
здание
building
archibase_planet
free
Building
...lanet
building office office building construction
building n090914 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
Building
...net
building tower construction high-rise building
building n100214 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
3d_export
free
Building
...building
3dexport
low poly building;
3d_export
free
Building
...building
3dexport
low poly building;
3d_export
free
Building
...building
3dexport
low poly building;
3d_export
free
Building
...building
3dexport
low poly building;
3d_export
free
Building
...building
3dexport
low poly building;