Thingiverse
SCSI2SD HD Mount by jammi
by Thingiverse
Last crawled date: 3 years, 3 months ago
Converts the bottom mount of the amigastore.eu SCSI2SD device to normal 3.5" hard disk side mounting (only the rear part, two pairs of mounting screws). Doesn't need much infill and the circles in the model will give it extra perimeter strength. The side screw holes should work as self-tapping holes, and I recommend fixing the SCSI2SD to this adapter with normal M3 screws + nuts. The #6-32 UNC will be easier to use if you prime the printed holes with the screws before you mount the device in its case / computer.
Similar models
thingiverse
free
SCSI2SD v6 sled by aeberbach
... scsi2sd to a mount expecting the screw pattern on the bottom of a 3.5" drive.
insert m3 hex nuts into the hex-shaped holes.
thingiverse
free
SCSI2SD Floppy Mount for Macintosh SE
...my macintosh se. m3x8mm screws are used to attach the pcb to the print then the print lines up with the lower floppy drive mount.
thingiverse
free
SCSI2SD V5.1 or V6 mount for NeXTstation by SYNTHTC
...and m3 screws.
added chamfer to bosses to increase strength and increased wall thickness.
fixed rear hole spacing, was off 0.5mm
thingiverse
free
DAC mount (Prozor PST054) by atanasovgoran
...ut the device into the back mount and slide it into the already mounted front mount screw the back mount and connect your device.
thingiverse
free
Parametric Screw to Zip Tie Adapter by ctheroux
...r that lets you mount a device designed for screws with a zip tie. you do not need to make holes in the thing holding the device.
thingiverse
free
Ring Doorbell Mount by menerso
...ameter to allow a #4 screw to directly into the mount.
the holes for the wall mount are 5mm in diameter and will take a #8 screw.
thingiverse
free
SCSI2SD mount for NeXT Color Slab by Wayne123
...or slab by wayne123
thingiverse
mount for a scsi2sd adapter to attach it to the metal drive plate in a 1990 next color computer.
thingiverse
free
Garmin quarter turn mount by uar
...r just glue it.
two variants: one with chamfers for countersunk screws and one without.
including step files for easier changes.
thingiverse
free
Macintosh Portable 34-50 Pin Adapter and SCSI2SD HDD Mounting Tray by redrum69
... mount the michael mcmaster 34-50 pin sccsi adapter, and scsi2sd v5b neatly into the original hdd tray of the macintosh portable.
thingiverse
free
Shower caddy by Tinknocker
... mounts on the shower head but i wanted it on the other side so this screws on the top so when removed there is no visible holes.
Jammi
thingiverse
free
Jammie Dodger Cookie Cutter by smartroad
...that it is a similar consistancy to the jam used in jammie dodgers. so with a shortbread recipe i made my own with these cutters.
thingiverse
free
Jammie Dodger Heart Cookie Cutter by cheesemcgee
... shaped jammie dodgers. i threw this together really quick and it worked perfect, thanks to mouserunner for his original design!
thingiverse
free
Jammie Dodger Cookie Cutter - BOUNCER !
... boss
it will speed up your work and get rid of your worries :p
glue the handle to the body of the object with strong adhesive
thingiverse
free
Yet another M3 thumbnut for M3 nuts and bolts by jammi
...erse
just another m3 thumb nut, rounded and feels nice.
use these on hex nuts and bolt heads. heat the bolt or nut to insert it.
thingiverse
free
My drawing of Talon Tricopter with extra jammi by philsson
...ame. the parts in purple are the ones printed.
using crius aio pro
ask for upload of individual parts as total archive is to big.
thingiverse
free
Polygon Mesh Cat Bookend by jammi
...re print cooling or possibly slightly lower temperature, and finer k-value calibration (or retraction settings, if you use that).
thingiverse
free
5015 radial to 40mm axial fan adapter by jammi
...
mount the adapter to where the fan would go with as many screws as you see fit.
the alt version has the mounting arm vertically.
thingiverse
free
ReprapDiscount Desk Case by jammi
...pdate: reprapdiscount-plate-3.stl includes the mount and has all three foot parts in correct orientation, unlike previous plates.
thingiverse
free
Grooved bearing lever for the Titan extruders by jammi
...lament hard enough to make it jam. here's another similar model on thingiverse in case you don't have luck with this one.
Scsi2Sd
thingiverse
free
scsi2sd v6 case
...scsi2sd v6 case
thingiverse
a case for a scsi to sd "adapter"
thingiverse
free
Amiga SCSI2SD bracket - OpenSCAD source by _CrazyBob_
...amiga scsi2sd bracket - openscad source by _crazybob_
thingiverse
this is a scsi2sd bracket which protects the adapter pcb.
thingiverse
free
PC Expansion SCSI2SD v6 bracket by joeylith
...pc expansion scsi2sd v6 bracket by joeylith
thingiverse
scsi2sd v6 frame to be placed in a pc expansion slot.
thingiverse
free
SCSI2SD v6 sled by aeberbach
... scsi2sd to a mount expecting the screw pattern on the bottom of a 3.5" drive.
insert m3 hex nuts into the hex-shaped holes.
thingiverse
free
SCSI2SD mount for NeXT Color Slab by Wayne123
...or slab by wayne123
thingiverse
mount for a scsi2sd adapter to attach it to the metal drive plate in a 1990 next color computer.
thingiverse
free
SCSI2SD Universal Mount by parice
...ndex.php?/topic/28500-scsi2sd-universal-mount/
i thought it would be useful to upload here if anyone is searching for an adapter.
thingiverse
free
SCSI2SD v5.1 to 3.5" HDD bracket
...ingiverse
an adapter to mount an scsi2sd v5.1 wherever a 3.5" hdd could mount. i think. haven't actually tested it yet.
thingiverse
free
SCSI2SD Floppy Mount for Macintosh SE
...my macintosh se. m3x8mm screws are used to attach the pcb to the print then the print lines up with the lower floppy drive mount.
thingiverse
free
SCSI2SD V5 Mac SE Bracket by evolver56k
...floppy drives, and i didn't want to remove a floppy drive, or mount the scsi2sd close to the crt on top of the floppy drives.
thingiverse
free
SCSI2SD Case by Franks3dShop
...ion 360 file so you can make remix of this as you like.
enjoy.
p.s: ref. http://www.codesrc.com/mediawiki/index.php?title=scsi2sd
Hd
thingiverse
free
HD CASE
...hd case
thingiverse
3.5in hd case
(also see thing:3892498 & thing:3721003)
thingiverse
free
Laser HD TPU
...laser hd tpu
thingiverse
transtec laser hd tpu
thingiverse
free
hd by apalmisano098
...hd by apalmisano098
thingiverse
n
thingiverse
free
Support HD by Pifle
...support hd by pifle
thingiverse
3 symmetrical elements to support your hd
thingiverse
free
HD Caddy 3.5in HD 3X by STEGOBOARD
...drives.
requires:
twelve 6-32 x 3/8" long machine screws.
for ideas on how to use this 3d printed item, visit:stegoboard.com
thingiverse
free
HD Caddy 3.5in HD 2X by STEGOBOARD
... drives.
requires:
eight 6-32 x 3/8" long machine screws.
for ideas on how to use this 3d printed item, visit:stegoboard.com
thingiverse
free
HD Caddy 2.5in HD 3X by STEGOBOARD
...d state drives.
requires:
twelve m3 x 8mm long machine screws.
for ideas on how to use this 3d printed item, visit:stegoboard.com
thingiverse
free
HD Caddy 2.5in HD 2X by STEGOBOARD
...id state drives.
requires:
eight m3 x 8mm long machine screws.
for ideas on how to use this 3d printed item, visit:stegoboard.com
thingiverse
free
HD logo by bandit-ed
...hd logo by bandit-ed
thingiverse
hd logo
thingiverse
free
Five33 Switchback HD by FlyFive33
...five33 switchback hd by flyfive33
thingiverse
switchback hd prints
Mount
thingiverse
free
Pen Mount on BLTouch mount by jetspot
...pen mount on bltouch mount by jetspot
thingiverse
pen mount on bltouch mount
thingiverse
free
RAM Mount, Mount by seanmclean
...ram mount, mount by seanmclean
thingiverse
bridging plate to attach ram mount to yamaha 242, for chartplotter placement.
thingiverse
free
Mount for mount for Garmin GPS by GNOBLIN
...you can use this mount for prevent rotation simple mount around hendelbars.
d handelbar 31.8mm
use m3 screw and din 16903 plug.
thingiverse
free
Permanent mount for Modular Mounting System by WIR14
...permanent mount for modular mounting system by wir14
thingiverse
permanent mount for modular mounting system.
thingiverse
free
Gopro Mount and antenna mount by SuperYoyo
...gopro mount and antenna mount by superyoyo
thingiverse
cut the carbon platform to pass the gopro mount and enjoy !
thingiverse
free
Hexagon Mount for 50mm Mount (Sparkcube) by Draman
...for 50mm mount (sparkcube) by draman
thingiverse
hexagon mount remix from skimmys hotend-mount for sparkcube or other 50mm-mount
thingiverse
free
mount by gixster
...mount by gixster
thingiverse
custom mount
thingiverse
free
Mount by Matrxi999
...mount by matrxi999
thingiverse
shelf mount
thingiverse
free
Motor mount
...motor mount
thingiverse
motor mount
thingiverse
free
GoPro Mount
...gopro mount
thingiverse
gopro mount