Screw / small parts case (large)

Last crawled date: 4 years, 2 months ago

Screw / Small parts case. This is designed for the maximum print size possible on a Prusa MK3S. To fill the max space, the small boxes are all the same and the large ones are sized to fill the remaining space. You won't be able to fit different box combinations than 16 small + 2 large.
It's a snug fit: With all boxes in the tray, the free space should be below 1/2mm.
Instructions:
1) Make sure that your printer is enclosed or in a very stable temperature environment to make sure the base layer does not disconnect from the bed. If there is a minimal disconnect from the bed (1cm from the edge on the corners) it should not matter.
2) Print the Tray 1x
3) Print the large box 2x
4) Print the small box 16x
Edit yours here: https://www.tinkercad.com/things/azZ6tmnOdA1