Screw in power switch housing and mounting bracket by CAMason

Last crawled date: 3 years, 1 month ago

This is a box for my power switch (with screw holes) which I designed to be screwed to the leg of an Ikea lack table. I have an Anet A8 and wanted a power switch to be available near the front of my work area, whilst hiding the PSU under the table.
This housing accommodates a screw-in power switch (non rectangle) approx 49mm x 58mm (inner rect is 27mm x 46mm).
The power box fixes to the box using some self-tapping pan-head M3 screws.
To fit the mounting bracket accurately, insert some short M3 screws where the tip is just pointing out, then slot into the housing. Find the desired location, and press firmly against the surface. This will mark the screw locations. Drill out with a 1-2mm bit, and fix with at least M3x10 pan-head or longer.