Scissor Lamp Adapter 12mm & 13mm ID 20mm OD by percaine

Last crawled date: 3 years, 1 month ago

I needed a clamp/way to mount my lamp/microphone/smartphone scissor extension arm as the original one broke..I checked on here but none of the ones I found fit my needs and took way too long to print..As you can see from the pictures this thing is basically just an adapter that allows me to drill a 20mm hole in my crappy old desk(yes you'll have to drill a hole in yours to to use it) and adapt it to work with either my 13mm(actually a bit less than13mm) scissor extension arm or my 12mm one(slight less than 12mm as well) The STL contains both sizes..
I chose 20mm as the outside diameter mostly because I happen to have a step bit with it's biggest measurement being 20mm so no need to mess around.
As mentioned above you will have to drill a hole in your desk to use this thing so be sure you are comfortable with that and if you're a kid ask your parents for permission first before drilling into your desk..lol Also some sanding or resizing may be needed if your scissor arm is not the same as mine..
Worked like a charm for me and the fit is very tight..Most usefully thing I've made so far!!!!