Thingiverse
Sci-Fi Sniper Rifle prop by PaperScarecrow
by Thingiverse
Last crawled date: 3 years ago
My first project with a degree of absurdity, a full-scale Science Fiction inspired rifle. Designed from scratch and approximately the length of a Barrett M107. This is the longest (and largest) project I've ever attempted; the first model that took more more than 6 hours to design.
I had originally designed it to accept an HPA airsoft unit such as a wolverine SMP or a similar system, but some design quirks caused that attempt to end in failure. I'll probably re-attempt that when I get more time to tinker, but for now I figured it'd make a killer prop for anyone attempting a sci-fi costume or cosplay setup. Finished length is approximately 45 in, or 1.14 meters (it's pretty big).
This will take a couple spools of PLA if all parts are printed at 10-15% fill density. Many of the parts require a large amount of support material (the receiver pieces, magwell, and grip), so unfortunately there will be a lot of waste. The end result weighs around 1.1kg.
All pieces were sliced to fit a kossel mini's 180x180x230mm build area, so the unsliced full assembly files are included in case you wish to chop the model into larger pieces for printers with a larger work area. There is also an unsliced pistol version of this model, so you can slice and attempt that if a gigantic pistol works better for your costume than a rifle.
The Reflex sight model is an accessory sized to fit on the top rail, you can either leave it hollow or use the included template piece to cut out a piece of clear plastic to act as a lens, there is also room in the base to allow for some small electronics, along with a small hole to let the light from an LED shine onto the lens. So you should be able to cram a watch battery and an LED into position in the hollow base to make a functional dot sight.
Depending on the material you use you may need to adjust relative part scales (ie. 1.03 scale for the upper receiver, grip and handguard, 1.01 for the lower receiver, 0.99 for the magazine and pins, and sand/shave down parts that don't fit cleanly).
Assembly instructions: Print all parts out of PLA at 10-15% fill density, print the trigger in its two halves and glue them together, Print the stock recoil/butt pad out of TPU at a 30% fill density (or 10% density PLA, if you don't want the squish). There are two forms of the magazine, one extended and one standard length, and two forms of the magazine well (one branded with a radiation symbol on the left side, and the text "XR-11, cal. 0.230 SN#0001 on the right, and the other being plain, in case you want to do your own custom text or symbols).
After printing all parts, prepare the surfaces and adhere them using either superglue, gorilla glue (the "white" expanding type), or two-part epoxy. I personally used a glob of gorilla glue in the center of each piece, surrounded by dabs of superglue to make sure that everything held firm. The trigger is held in the body using a 1/8" pin (or a long m3 bolt), and there is room to add a spring inside the body if you want the trigger to function.
For body pins I've included a model file, but I would suggest printing it only as a size reference so you can pick up a pair of lynch pins from a hardware store, they'll be easier to insert and remove.
CostumeChallenge2017
I had originally designed it to accept an HPA airsoft unit such as a wolverine SMP or a similar system, but some design quirks caused that attempt to end in failure. I'll probably re-attempt that when I get more time to tinker, but for now I figured it'd make a killer prop for anyone attempting a sci-fi costume or cosplay setup. Finished length is approximately 45 in, or 1.14 meters (it's pretty big).
This will take a couple spools of PLA if all parts are printed at 10-15% fill density. Many of the parts require a large amount of support material (the receiver pieces, magwell, and grip), so unfortunately there will be a lot of waste. The end result weighs around 1.1kg.
All pieces were sliced to fit a kossel mini's 180x180x230mm build area, so the unsliced full assembly files are included in case you wish to chop the model into larger pieces for printers with a larger work area. There is also an unsliced pistol version of this model, so you can slice and attempt that if a gigantic pistol works better for your costume than a rifle.
The Reflex sight model is an accessory sized to fit on the top rail, you can either leave it hollow or use the included template piece to cut out a piece of clear plastic to act as a lens, there is also room in the base to allow for some small electronics, along with a small hole to let the light from an LED shine onto the lens. So you should be able to cram a watch battery and an LED into position in the hollow base to make a functional dot sight.
Depending on the material you use you may need to adjust relative part scales (ie. 1.03 scale for the upper receiver, grip and handguard, 1.01 for the lower receiver, 0.99 for the magazine and pins, and sand/shave down parts that don't fit cleanly).
Assembly instructions: Print all parts out of PLA at 10-15% fill density, print the trigger in its two halves and glue them together, Print the stock recoil/butt pad out of TPU at a 30% fill density (or 10% density PLA, if you don't want the squish). There are two forms of the magazine, one extended and one standard length, and two forms of the magazine well (one branded with a radiation symbol on the left side, and the text "XR-11, cal. 0.230 SN#0001 on the right, and the other being plain, in case you want to do your own custom text or symbols).
After printing all parts, prepare the surfaces and adhere them using either superglue, gorilla glue (the "white" expanding type), or two-part epoxy. I personally used a glob of gorilla glue in the center of each piece, surrounded by dabs of superglue to make sure that everything held firm. The trigger is held in the body using a 1/8" pin (or a long m3 bolt), and there is room to add a spring inside the body if you want the trigger to function.
For body pins I've included a model file, but I would suggest printing it only as a size reference so you can pick up a pair of lynch pins from a hardware store, they'll be easier to insert and remove.
CostumeChallenge2017
Similar models
thingiverse
free
Halo 3 Assault Rifle Magazine by NathanTheTebbs
...ault rifle here: https://www.thingiverse.com/thing:2022120
i've modeled a basic magazine, light tube, and trigger to glue on.
thingiverse
free
DC-17M Clone Commando Blaster Rifle by Cortexian
... you to keep the magazine "removable". either for storage and transport, or for cosplay "action feature" use.
thingiverse
free
One-Piece Rubber Band Gun by thoromyr
...
pin/dowel tapered to ease insertion
front sight separate piece
trigger guard expanded to accomodate trigger
grip is taller
thingiverse
free
H&K UMP 45 (Prop) by AFlyingCosmonaut
... plate in place.
screw on handrail and top rail using m5 screws. m5 threaded inserts should be used if the screws don't bite.
thingiverse
free
Dreamcast controller fix for broken trigger pins by grantek
...ds so printed without support. after cleaning up with a knife there is still a good surface to glue to the inside of the trigger.
3dwarehouse
free
Semi Automatic Rifle
...e
i created the receiver by myself, but borrowed other parts. equiped with a 30 round box magazine and a low magnifacation sight
thingiverse
free
Solar Finder by charlesodonnell
...rough the scope and aligning the tube. then, when under the sun, align the scope so that the shadows from the two reticles align.
thingiverse
free
Mag Release Extension for Marlin 795 w\ DiProducts Guard by Ted3682
...uses an m3 bolt, nut and washer, the bolt length is 8mm
print with 100% infill. i printed it in pla and pla+ and it worked great.
grabcad
free
multi modification weapon prototype
...ed for the 9mm magazine(sten) and be made in 1 part
trigger mecanism, magazine and buffer found on grabcad
work in semi auto only
thingiverse
free
Part Adjustments for "Warhammer 40K HANDGUN" by Kalavek
...have the edges of the cavity before the sights land flat on the receiver, this was intentional to avoid the part being too loose.
Paperscarecrow
thingiverse
free
Airsoft Stock locking tab/button for A&K Masada by PaperScarecrow
... pla or nylon.
no shaving or fililng should be required if you print at 95% scale, it should drop right in and work like a charm.
thingiverse
free
ThrowYo yo-yo by PaperScarecrow
...s the best place to find these, just search for buddha whipple or ripple bearings, they're about $5 a piece and last forever.
thingiverse
free
Airsoft Sound Amplifier by PaperScarecrow
...n failures or breaks in the wall on machines that aren't well calibrated.
see it in action here: https://youtu.be/vlo7v527aqg
thingiverse
free
MicroYo - The mostly-printed mini yoyo by PaperScarecrow
...-part polyurethane resin to fill the void, which is also option if you want an extremely light yoyo that plays surprisingly well.
thingiverse
free
Yobox - Modular Hive shelf for yoyos or other small items by PaperScarecrow
...mmer or have a well tuned printer, i recommend using the large dovetail version. it prints cleaner and is easier to fit together.
thingiverse
free
The Hawk - A Mostly 3d Printed Quadcopter by PaperScarecrow
...)
printed parts list:
4x motor mounts
4x blade legs
1x main body
1x top cover (current version)
1x bottom cover (current version)
thingiverse
free
Cartrige/Shell for Marushin Shell Ejecting Gas Blowback Airsoft 1911 Pistols by PaperScarecrow
...ocate shells dropped in the field, and printing them from pla will ensure that any unrecovered shells bio-degrade in short order.
thingiverse
free
Airsoft Trigger for Version 2 (V2) Gearbox AEGs and HPA systems *Re-Upload* by PaperScarecrow
... well regardless of whether you're planning on 3d printing or utilizing reductive manufacturing techniques (ie. cnc milling).
thingiverse
free
Viper Trigger for Airsoft BAR-10, VSR-10 or other VSR style Airsoft rifles by PaperScarecrow
...et, sand the edges and you should be ready to roll.
this is a small part so watch your temps or you may encounter warping issues.
Sniper
3d_export
$5
sniper
...sniper
3dexport
https://portfolio.adobe.com/b3dece7f-fcfe-4e7b-99a2-d12fdc01eb6b/editor/sniper
3d_ocean
$14
Sniper Scope
...sniper scope
3docean
lens scope sniper
sniper scope. include: .max file(2010) with sniper scope objests and skylight.
3d_ocean
$8
Sniper Rifle
...sniper rifle
3docean
gun rifle sniper weapon
old style sniper model.
3d_export
$5
Sniper scope
...sniper scope
3dexport
sniper scope
turbosquid
$5
sniper
...r
turbosquid
royalty free 3d model sniper for download as ma on turbosquid: 3d models for games, architecture, videos. (1181783)
turbosquid
$2
Sniper
...urbosquid
royalty free 3d model sniper for download as blend on turbosquid: 3d models for games, architecture, videos. (1197171)
3d_export
$39
sniper case
...sniper case
3dexport
sniper case to carry all kinds of sniper and. this product is very easy to carry.
3d_export
$39
Sniper
...sniper
3dexport
turbosquid
$27
sniper
...oyalty free 3d model sniper for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1503756)
turbosquid
$20
sniper
...oyalty free 3d model sniper for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1193704)
Rifle
3d_ocean
$9
rifle
...rifle
3docean
gun low poly rifle soldier weapon
rifle model max 2013 and obj 1024×1024 texture lowpoly
turbosquid
$30
Rifle
...le
turbosquid
royalty free 3d model rifle for download as ma on turbosquid: 3d models for games, architecture, videos. (1161496)
turbosquid
$1
rifle
...turbosquid
royalty free 3d model rifle for download as blend on turbosquid: 3d models for games, architecture, videos. (1344661)
3d_export
$5
longfire rifle
...longfire rifle
3dexport
longfire rifle
3d_export
free
butt of the rifle
...butt of the rifle
3dexport
butt of the rifle
3d_export
free
repeater rifle
...repeater rifle
3dexport
repeater rifle
3d_export
$15
Rifle v2
...rifle v2
3dexport
assault rifle, designed for the protection and storming of objects. the rifle has a paralytic function.
turbosquid
$20
Rifle
...quid
royalty free 3d model rifle for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1301083)
3d_export
$5
rifle sks
...rifle sks
3dexport
rifle sks simonov
turbosquid
$49
Rifle
...
royalty free 3d model rifle for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1582428)
Sci
turbosquid
$5
Sci fi collection (sci fi car, sci fi drone & sci fi corridor)
...& sci fi corridor) for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1432046)
3d_ocean
$25
Sci-Fi Locator
...sci-fi locator
3docean
aerial wire antenna fi future locator sci sci-fi
3d model sci-fi locator by alekrazum vray materials
3d_export
$15
sci fi desktop
...sci fi desktop
3dexport
sci fi desktop
3d_export
$5
sci-fi tech
...sci-fi tech
3dexport
sci-fi asset
3d_export
$5
sci fi corridor
...sci fi corridor
3dexport
sci fi corridor
3d_export
$5
sci-fi motorcycle
...sci-fi motorcycle
3dexport
sci fi motorcycle
3d_export
free
sci-fi pack
...sci-fi pack
3dexport
sci-fi pack
3d_export
free
sci-fi wires
...sci-fi wires
3dexport
sci fi wires. can be as a stand alone sci fi building or as a part of architectural complex.
3d_export
$6
Sci-fi rifle
...sci-fi rifle
3dexport
a rifle for sci-fi games
3d_export
$17
sci fi spear
...sci fi spear
3dexport
low poly sci fi spear
Fi
3ddd
$1
Fies
...fies
3ddd
смеситель , fies
моделил с каталога
3ddd
$1
wi-fi
...wi-fi
3ddd
wi fi
wi-fi
turbosquid
$5
Sci fi collection (sci fi car, sci fi drone & sci fi corridor)
...& sci fi corridor) for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1432046)
3d_ocean
$9
Hi-Fi
...hi-fi
3docean
hi-fi high-tech highpoly music
i reproduced my hi-fi with blender and rendered with yafaray !
3d_ocean
$25
Sci-Fi Locator
...sci-fi locator
3docean
aerial wire antenna fi future locator sci sci-fi
3d model sci-fi locator by alekrazum vray materials
3d_export
$15
sci fi desktop
...sci fi desktop
3dexport
sci fi desktop
3d_export
$5
Wi-Fi Jammer
...wi-fi jammer
3dexport
глушилка wi-fi
3d_export
$5
sci-fi tech
...sci-fi tech
3dexport
sci-fi asset
3d_export
$5
sci fi corridor
...sci fi corridor
3dexport
sci fi corridor
3d_export
$5
wi-fi adapter
...wi-fi adapter
3dexport
wi-fi for pc!
Prop
3ddd
$1
Props
...props
3ddd
props
3d_ocean
$10
Props
...ject you need this props design this 6 taype for props to get your design perfect and nice file include : 1 max 2 obj 3 3ds 4 zip
turbosquid
$15
Props
...s
turbosquid
royalty free 3d model props for download as max on turbosquid: 3d models for games, architecture, videos. (1249032)
turbosquid
$1
PROPS
...d model props for download as unitypackage, obj, fbx, and tga on turbosquid: 3d models for games, architecture, videos. (1627660)
turbosquid
$5
props
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
PROP
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
kids props
...kids props
3ddd
декоративный набор
kids props
3d_ocean
$8
Street props
...l barrier prop roads street street prop
street props game models barrel barrier roads aircos jerrycan models fbx obj and max file
turbosquid
$39
Apocalyptic Props
...uid
royalty free 3d model apocalyptic props for download as on turbosquid: 3d models for games, architecture, videos. (1380028)
turbosquid
$1
Bunker props
...rbosquid
royalty free 3d model bunker props for download as on turbosquid: 3d models for games, architecture, videos. (1196014)