Schwanky Oven Knobs for fancier living by Cletus_Bojangles

Last crawled date: 3 years, 1 month ago

We got our stove as a demo model missing two of five knobs. It was used this way for 2 years. Thanks to 3d printing it has all new matching ones. You can't find any aftermarket knobs that are a different shape like this, so if you are looking for something a little different here you go!
These fit on a ~7mm round post with a 5mm flat side and ~10mm of insertion. They are a tight fit which is what you want.
The stove they were printed for is a Frigidaire.
Printed in PLA with a .03mm layer height, 3 perimeters, and 4 top and bottom layers.
It may be necessary to break away some support material inside the middle hole before attempting to push your knob on.
I have included the complete .STL if you are able to use these in their normal configuration or two .STL files that are the knob and center post separate so you can scale the hole to fit your application.