Thingiverse
Schnabel-car for Märklin by thedany
by Thingiverse
Last crawled date: 3 years, 1 month ago
his model of a Schnabel - car is not based on a real prototype. It is an impressonate model which just show the typical shape of such a car and has a size to use on most regular layouts.
It uses the bogies used at the Märklin - cars 4617/4618. And the transformer-model which came with Märklin 4617.
Needed parts to complete the car:
Four bogies from Märklin 4617/4618 or other bogies with a 5mm hole. The couplers, buffers and the handrail must be removed from two (the inner) bogies.
Four 1.4x6 bolts and nuts or hard wire (1mm dia.) to mount the transformer-bridge to the arms.
Four M3 screws and 5mm washers to mount the bogies to the bogie-bridge.
To assemble one car you need to print two bogie-bridges (either with or without cab), two arms, one transformer-bridge, one or two roofs for the cab and four bogie - bolts. The bogie-bolts have M3 threads and must be glued to the bogie-bridges.
The sample model shown is finished with filler, partly sanded and sprayed in the red color of the German Railways.
It uses the bogies used at the Märklin - cars 4617/4618. And the transformer-model which came with Märklin 4617.
Needed parts to complete the car:
Four bogies from Märklin 4617/4618 or other bogies with a 5mm hole. The couplers, buffers and the handrail must be removed from two (the inner) bogies.
Four 1.4x6 bolts and nuts or hard wire (1mm dia.) to mount the transformer-bridge to the arms.
Four M3 screws and 5mm washers to mount the bogies to the bogie-bridge.
To assemble one car you need to print two bogie-bridges (either with or without cab), two arms, one transformer-bridge, one or two roofs for the cab and four bogie - bolts. The bogie-bolts have M3 threads and must be glued to the bogie-bridges.
The sample model shown is finished with filler, partly sanded and sprayed in the red color of the German Railways.
Similar models
thingiverse
free
Wanhao Bed mount camera - Rugged version by Bleugh
.../ nuts will do the job
there are 3 arms, only need to print two, either a 4mm wide end, or a 3mm depending on your camera housing
3dwarehouse
free
Train Car 28. Schnabel cars
...train car 28. schnabel cars
3dwarehouse
here are two schnabels cars
thingiverse
free
Friction arm LED by DIYhans
... needed for the arms
to mount on a camera hot shoe you can use a
double screw angle 1/4"-20 hot shoe mount
bolts used are m3
thingiverse
free
5mm Motor Shaft Coupler - RS775 Motor
... nut and bolt to hold both propeller and shaft to the coupler.
design is not symmetric so the propeller nuts must face the motor.
thingiverse
free
Hemera universal BLTouch mount
...o the hemera.
i used two m3x20 bolts
pop m3 bolts into the nut capture holes on the from of the holder then bolt them to the fan
thingiverse
free
Din Rail Mount for Sparkfun Modules using M3 screws by NotLikeALeafOnTheWind
...e last position allows for hanging a module off the end so that through hole components do not interfere with the board mounting.
thingiverse
free
OctoPi Case V-Slot Mount by aaronroma
...t, print two of the m3 t-nuts. you will then need 2 m3 nuts to press fit into the t-nuts. you will also need 2 m3 x 6mm bolts.
thingiverse
free
Tamiya King Cab Rear Arm mount by malrick
...tamiya king cab rear arm mount by malrick
thingiverse
tamiya king cab rear arm mount from f grappe.
need to drill a little bite
thingiverse
free
Y-Axis Belt Mount for Anet A6 (No additional Hardware Needed) by wrthg
...holder). use four m3 bolts and nuts from your left over hardware. use the original m4 bolts to mount the block to the y carriage.
thingiverse
free
Taro 680 FPV camera mount by Reject_H0
...rails.
to secure the mount to the rails you need to slot in two m3 nuts which then allows you to use two m3 bolts as grub screws.
Thedany
thingiverse
free
Headphone holder by thedany
...iverse
with this thing you can hang your headphones nearly everywhere. the flat side is mounted with double-sided adhesive tape.
thingiverse
free
Märklin 4500 LEGO-adapter by thedany
...pter by thedany
thingiverse
a lego - compatible plate for the classic märklin 4500 - chassis. it is just clipped to the chassis.
thingiverse
free
Arduino-mount for Märklin and Meccano metal construction set by thedany
...e the arduino uno or the arduino mega, to fit.
the thing fits to metal construction parts from the companies meccano and märklin.
thingiverse
free
Sensormount for Märklin and Meccano metal construction set by thedany
...rds like the arduino.with this mount you can attach the module the metal construction construction sets like meccano and märklin.
Schnabel
thingiverse
free
schnabel by Syzguru11
...schnabel by syzguru11
thingiverse
schnabelhttps://youtu.be/9tbotsprnik
thingiverse
free
Dr. Schnabel Set anonymous mask by Syzguru11
...dr. schnabel set anonymous mask by syzguru11
thingiverse
dr. schnabel set
thingiverse
free
Anonymous Dr-Schnabel plague Doctor mask - a taste of venecia by Syzguru11
...
also check out other virus designs:https://www.thingiverse.com/syzguru11/collections/virus
the cure:https://youtu.be/cm2_igo4d6q
thingiverse
free
LEGO DUPLO train Flatcar Heavy hauler Schnabel car by markosaurus
...
how i print it:
base: 15 percent infil, supports
swivel: 100 percent infil, supports
https://www.youtube.com/watch?v=p4fywz03baw
3dwarehouse
free
Train Car 28. Schnabel cars
...train car 28. schnabel cars
3dwarehouse
here are two schnabels cars
3dwarehouse
free
Train Car 27
...for mi to made #car #hydraulic #load #railroading #schnabel #schnabelcar #special #special_load #strange #systems #train #train_car...
3dwarehouse
free
Das Staatswappen der Bundesrepublik Deutschland
...rechts gewendet, die flügel offen, aber mit geschlossenem gefieder, schnabel zunge und fänge von roter farbe, den sogenannten bundesadler....
3dwarehouse
free
Das Staatswappen der Bundesrepublik Deutschland
...rechts gewendet, die flügel offen, aber mit geschlossenem gefieder, schnabel zunge und fänge von roter farbe, den sogenannten bundesadler....
Märklin
thingiverse
free
Märklin Kupplungsadapter by Scheffkoch
...tte kauft den adapter im märklin-shop und unterstützt damit märklin und die märklin-einzelhändler... außer das ist unpraktikabel!
thingiverse
free
Guardrail märklin sprint by VolkerHochholzer
...guardrail märklin sprint by volkerhochholzer
thingiverse
2.8m guardrail for märklin sprint.
thingiverse
free
Märklin 4500 LEGO-adapter by thedany
...pter by thedany
thingiverse
a lego - compatible plate for the classic märklin 4500 - chassis. it is just clipped to the chassis.
thingiverse
free
Märklin Alpha Cover with vents by matthiaswiesmann
...lin in the 80s.
the vents come from the vents / grills / louvres for scratchbuilding/kitbashing 1/60 scale robot models project.
thingiverse
free
Caps for Märklin street lamps 7282 by ccs66
...in 1972 often the plastic-caps are missing.
they are printed in regular, white pla. original märklin part number: 41453 / 414530
thingiverse
free
Märklin 3000 decoder support by matthiaswiesmann
... inside a märklin 3000 h0 locomotive. it is designed to be screwed in where the inverter is, with a hole for cables at the front.
thingiverse
free
Gleisbox Halter Märklin 601132 60116 / Track box halter Märklin 601132 60116 by jogiarea
...or screwing on the märklin track box
you need two of the brackets
this is then fastened with 2 countersunk screws diameter 3 each
thingiverse
free
Transportbox Spur Z, Miniclub, Märklin by Stagi741
...n miniclub) eisenbahnen oder waggons.
maßstab 1:220
small transportbox for z line trains or wagons (märklin miniclub)
scale 1:220
thingiverse
free
Wagen Entkoppler für Märklin H0 Modelleisenbahn by Thomsson
...wagen entkoppler für märklin h0 modelleisenbahn by thomsson
thingiverse
wagen entkoppler für märklin h0 modelleisenbahn
thingiverse
free
Schranke Märklin H0 Railway Barrier by exrcvhjblnkz
...ay barrier by exrcvhjblnkz
thingiverse
simple design for a lost märklin railway barrier.
has a 3.4mm opening and is ~9.5cm long.
Car
3d_export
$5
car
...car
3dexport
luxury car high quality car
3d_export
$5
car
...car
3dexport
luxury car high quality car
3d_export
$5
car
...car
3dexport
luxury car high quality car
3d_export
$5
car
...car
3dexport
luxury car high quality car
3d_export
$5
car
...car
3dexport
luxury car high quality car
archibase_planet
free
Car
...
archibase planet
car sports car motor-car sportster
car nascar#1 n300114 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Car
...ibase planet
car motor-car sportster sports car
car gablota xform n190214 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Car
...car
archibase planet
car motor car transport
car vaz 2104- 3d model for interior 3d visualization.
3d_export
$15
car
...car
3dexport
car
3d_export
free
car
...car
3dexport
car