Thingiverse
Scanguage Mounting Bracket by smasse294
by Thingiverse
Last crawled date: 2 years, 12 months ago
Introduction:
This is a mounting bracket for the Scanguage. The concept is based off using the rear view mirror as support. This allows you to place the Scanguage above or below the rear view mirror.
I designed this to solve two problems. The first one is if you mount the Scanguage on top of the dash you may get a reflection in the windshield, especially at night. Also I found that the backlight was too much at night. The second issue was that neither velcro nor command strips were able to keep this rather light device put. In both cases the device was coming off the fasten (velcro/command strips).
Benefits:
By moving the Scanguage next to the rear view mirror:
The Scanguage is still easily visible while diving
The backlight is no longer distracting at night
Scanguage is out of sight of thieves
Design:
This is a multipart design. The first part attaches to the rear view mirror stem (the part that connects the rear view mirror to the windshield). This consists of two halves that bolt together around the stem. This serves as the connecting point to the mirror. The second part connects to the Scanguage. This version is design to use the screws in the back of the Scanguage as the attaching point. This is achieved by removing the screws from the back of the Scanguage and replacing them with longer screws that pass through the mounting bracket. This keeps the Scanguage in place. A bolt connects the two pieces together and allow adjustment of the angle to accommodate different mirrors, viewing angles, and mirror adjustments.
Also included is an extension arm in case more distance between the two parts are needed.
Limitations:
This currently is designed for mirrors with round stems (the arm connecting the mirror to the windshield). There are some manufactures that do not use round stems for their rear view mirrors. As is this bracket will not work with those mirrors.
File Information:
Included is the stl files (.stl) for printing. Also included is the 123D design files (.123dx) for those familiar with the free software from Autodesk and wish to tweak the design. Autodesk 123 Design is available at http://www.123dapp.com/design for Web, Windows, Mac, and iOS.
Update:
21 March 2014: Non-Substantive changes
2 Feb 2013: Initial Upload
3 Feb 2013: Added Scanguage II/Scanguage D bracket file.
11 May 2013: Added Scanguage-e version with screw holes
Warning:
Your attention should be on the road and you should have an unobstructed driving environment. READ AND FOLLOW the warning on page 2 of the Scanguage Manual. (http://www.scangauge.com/wp-content/uploads/documentation/sge-1-0/SGE_UM_101.pdf). This includes mounting the device and cable in a way that will not block your view or your ability to operate your car. When Installing this, make sure your rear view mirror is PROPERLY ADJUSTED and you have an UNOBSTRUCTED VIEW. I cannot be held responsible for a lack of common sense.
This is a mounting bracket for the Scanguage. The concept is based off using the rear view mirror as support. This allows you to place the Scanguage above or below the rear view mirror.
I designed this to solve two problems. The first one is if you mount the Scanguage on top of the dash you may get a reflection in the windshield, especially at night. Also I found that the backlight was too much at night. The second issue was that neither velcro nor command strips were able to keep this rather light device put. In both cases the device was coming off the fasten (velcro/command strips).
Benefits:
By moving the Scanguage next to the rear view mirror:
The Scanguage is still easily visible while diving
The backlight is no longer distracting at night
Scanguage is out of sight of thieves
Design:
This is a multipart design. The first part attaches to the rear view mirror stem (the part that connects the rear view mirror to the windshield). This consists of two halves that bolt together around the stem. This serves as the connecting point to the mirror. The second part connects to the Scanguage. This version is design to use the screws in the back of the Scanguage as the attaching point. This is achieved by removing the screws from the back of the Scanguage and replacing them with longer screws that pass through the mounting bracket. This keeps the Scanguage in place. A bolt connects the two pieces together and allow adjustment of the angle to accommodate different mirrors, viewing angles, and mirror adjustments.
Also included is an extension arm in case more distance between the two parts are needed.
Limitations:
This currently is designed for mirrors with round stems (the arm connecting the mirror to the windshield). There are some manufactures that do not use round stems for their rear view mirrors. As is this bracket will not work with those mirrors.
File Information:
Included is the stl files (.stl) for printing. Also included is the 123D design files (.123dx) for those familiar with the free software from Autodesk and wish to tweak the design. Autodesk 123 Design is available at http://www.123dapp.com/design for Web, Windows, Mac, and iOS.
Update:
21 March 2014: Non-Substantive changes
2 Feb 2013: Initial Upload
3 Feb 2013: Added Scanguage II/Scanguage D bracket file.
11 May 2013: Added Scanguage-e version with screw holes
Warning:
Your attention should be on the road and you should have an unobstructed driving environment. READ AND FOLLOW the warning on page 2 of the Scanguage Manual. (http://www.scangauge.com/wp-content/uploads/documentation/sge-1-0/SGE_UM_101.pdf). This includes mounting the device and cable in a way that will not block your view or your ability to operate your car. When Installing this, make sure your rear view mirror is PROPERLY ADJUSTED and you have an UNOBSTRUCTED VIEW. I cannot be held responsible for a lack of common sense.
Similar models
grabcad
free
Rear View Mirror for Jeep
...for jeep jk series. mounts to windshield gusset. assembly, so that arm and mirror can be adjusted relative to attachment bracket.
thingiverse
free
iPad Mini Holder for Car Rear view mirror by Aikido_
...holds ipad mini
part 2 mounts to mirror with tabs and velcro strips
the two sections get connected with a 1/4" bolt and nut.
thingiverse
free
Rear View Mirror Mount by marchjm
...ew mirror mount by marchjm
thingiverse
rear view mirror mount for an austin healey. mounts on the windshield with 2-sided tape.
thingiverse
free
Echo input mount
...nt for the echo input device, this is used in my car with some 3m sticky to hold it to the windshield behind the rear view mirror
thingiverse
free
BMW Z3 FOB Receiver Housing by Papa_Oso
...h one of these adapters. this paired with a pilot automotive mi-009 8" mirror made a great improvement to visibility for me.
thingiverse
free
Mirror brackets 5mm by uros2002
...o the grooves on the side and screwed with a screw 3mm
to mirror thicker than 5mm can be set up bumper to the back of the mirror.
thingiverse
free
Slotted rear bracket by justinr54321
... a remix of the rear bracket that includes a slot to mount the abl. will allow for two screws to keep the abl mount from moving.
thingiverse
free
Rear view android camera mirror mount by colboy39
...irror mount by colboy39
thingiverse
these are the bits needed to make a rear view mirror 7" android mount and is adjustable
grabcad
free
Aero Stem Rear Light Bracket
...aero stem rear light bracket
grabcad
bicycle stem rear light mount bracket for teardrop shaped (aero) stems.
thingiverse
free
Hadron power supply mounting brackets by Preso
... long (approx.) and 114.35 wide by 48.6 deep. the igs file is included if you need to tweak the design to suit your power supply.
Scanguage
thingiverse
free
Scanguage II Holder by WayTooManyHobbies
...cles in the us since 1998, and is accessible via a receptacle at the bottome of the dash on the driver's side of the vehicle.
thingiverse
free
ScanGuageII mounting clip by Grifplex
...scanguageii mounting clip by grifplex
thingiverse
a clip to secure a scanguage-ii to the rear-view mirror.
Smasse294
thingiverse
free
Transistor Tester Case by smasse294
...provided in hackerboxes box #18. an optional knob is included to compensate for the short amount of the rotary knob sticking out.
thingiverse
free
Replacement Golchi Cap by smasse294
...hing is a 3d printable version of that cap allowing you to replace that piece if missing or if you want to change up your design.
thingiverse
free
USB Case by smasse294
...r securing the drive between both cases. this allows the case to be assembled without the need of glue, adhesives, or fasteners.
thingiverse
free
Waterfall & Japanese Deer Scarer by smasse294
...s version increases the size of the reservoir and adds a waterfall to stop the splashes from the deer scarer, at least in theory.
thingiverse
free
Desktop Display Case by smasse294
...ign provides a 3 inch square working space that accommodates items .215 inches thick (loose fit) or slightly more (pressure fit).
thingiverse
free
Expanded Socket Pal by smasse294
...r your own, the model is not perfect linked so elements of it could break and require tweaking to work depending on what changes.
thingiverse
free
Filament Swatch System by smasse294
...hange parameters section under modify as most dimensions are tied to user created parameters for easy editing and parametric use.
thingiverse
free
USB Case PLUS (generic + Alcor USB)
...great and simple usb case design (no glue!) by smasse294 but i needed to adapt it to fit my...
Bracket
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel console
bracket 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel console
bracket 8 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket n280911 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
holder corbel bracket
bracket 9 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 10 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel console bracket
bracket 11 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
holder console bracket
bracket 12 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 13 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Mounting
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)