Scalable PV Breaker box by cpayne3d

Last crawled date: 3 years ago

This customizable PV Solar breaker box was designed to accommodate a standalone 100A breaker for connection between the solar battery bank and the AC inverter. This box is for indoor use only. It is not sealed or waterproof.
The OpenScad file is included.
Edit the variables at the top of the file to suit your needs.
OpenScad creates a warning that the case body is not manifold, but this is nothing to be concerned about. It is a warning for the power cable holes in the side of the box. The project prints fine. You can ignore the warning.
Be sure to download the Write.scad files as this project prints text on the breaker guard.
The files are included with this project or online at http://www.thingiverse.com/thing:16193
Many thanks to Thingiverse user HarlanDMii for creating this text module!
This project has 3 parts:
box body
box cover
breaker switch protection guard
Print info:
Use PLA or ABS.
Set infill = 20%
Set walls = 2
Set layers = 0.25
No supports
No rafts
Requirements:
(4) screws for cover plate install
(4) screws to attach the box to a solid surface