SB900 and SB910 45 deg grid by Aussie_Jo 3d model
3dmdb logo
Thingiverse
SB900 and SB910 45 deg grid by Aussie_Jo

SB900 and SB910 45 deg grid by Aussie_Jo

by Thingiverse
Last crawled date: 3 years, 1 month ago
Adapter to fit Nikon SB-900 and SB-910 speedlight bracket.
Please note you will need to print the bracket from this thing: https://www.thingiverse.com/thing:2322639
Collimates the light into a narrower beam and allows you to add a gel (by clamping between the bracket and the grid). This one is roughly a 45deg grid, wider than my other one from thing 2322639. Note, the output is not far off from what the bare flash does, only the falloff is more rapid.
There are 2 circular holes on the sides of the grid to glue in 10mm diameter x 3mm Magnets (Jaycar.com.au part # LM-1622).
NB!! If you wish to shoot rapidly and/or full power, please ensure the vent holes in the bracket are nice and open. Speedlights generate a fair chunk of heat and you risk melting the gel or speelight fresnel lens. Not as important with this 45 grid as with the narrower one since the grid holes are big enough to vent heat.

Tags