SANIC keyboard by nacly

Last crawled date: 3 years, 1 month ago

UPDATE: Moved the hole for cable towards the center of the 2 halfs. This allows for better cable management with a teensy or pro micro inside of it.
I designed a tiny split keyboard. I only have the matias version done, but the cherry mx version will become available if anyone shows interest.
Why only 32 keys?
-I only had 32 extra keys from my last build.
Won't this suck with only 32 keys?
-Probably. I designed it to learn about split keyboards with qmk firmware.
Those columns look very staggered.
-They are. People with bigger hands shouldn't have a problem. I have small hands. They're barely too staggered for me. Should be fine enough for testing.
Why is it called the SANIC keyboard?
-Gotta go fast.
Internal clearance for wires, diodes, and controller is ~5mm. This should be plenty if you use a pro micro. I'm pushing the limits with a teensy I had laying around.
Printed it on a Monoprice Select Mini v2
Fits within 120x120x120 build volume. Might need to add a few mm to the x and y in your slicer to get it to fit if you're on a printer that small though.
Any 8mm m3 screws should skip the bottom panel and tap into the holes in the top of the keyboard. should provide a nice tight fit.