Safety Keck Clips - 14/20, 19/22, 24/40 Taper Joint Clips by unotre

Last crawled date: 3 years ago

These Keck clips are made fail-safe by threading wire spines salvaged from common household twist-wraps through one or both of the eyelet pairs and twisting off. Safety pins are also a good choice. Do not use for suspending large flasks or assemblies if the clips will be exposed to temps of 90C or greater. The eyelets only stop things from dropping if the loops become severed when operating within the normal temperature range. At hot temps, the crescent rings may relax and lose grip entirely.
After applying clips, always give the two joints a tug to make sure the clip has seated properly above the shoulder on the male joint.
Print clips with medium infill and thick surface layer (4-5 layers). The connecting loops on clips printed with solid fill are prone to delamination at the crest during flexing.
Original style kecks available here:
14/20: http://www.thingiverse.com/thing:274395
19/22: http://www.thingiverse.com/thing:275257
24/40: http://www.thingiverse.com/thing:274563