Safe Light Switch Plate by routex

Last crawled date: 3 years, 1 month ago

I created this plate for the light at the entrance of my laboratory. I was looking for something original for large button lights and as I could not find anything that suited me, I drew this one. If you print front part for see inside, you can use « flash » colors for inside parts. I used ABS for all prined parts.
Glue together A-B-C of the same piece.
Unprinted parts:
9 screws M2.5 x 8mm
9 nuts M2.5
Assembly instructions:
First steps are the most difficults.
Assemble the bottom of the front in the box.
Install the switch.
Enter the top of the front in the box by starting with the switch.
The most difficult is done.
Screw together the base, the rail and the gear holder.
Screw base to the wall
Turn down light button
Put action part and gear in position
Put the box on the wall and screw it with the bottom screw.
2018-08-01 : Add guide for action bloc and modify the base for screw it.