RV Trailer 7 pin electrical plug and pin dock tongue mount organizer by TyCreek

Last crawled date: 3 years ago

Wanted to keep the plug end out of the dirt and my Andersen hitch plate pin needed a place too. Another design from out here printed too small for the trailer plug so I made my own. I printed this without support and it worked perfect right off the printer. The plug diameter is 46mm so it's easy to pop in/out without needing to line things up and the jack clamp diameter is 56mm.
There are 2 files with the only real difference being the tube length of 80 and 60. I haven't printed the 60 because the 80 while having more docking depth than needed, is working just fine. The 60 should however be slightly more ideal for the purpose.
I added a remake of my tongue organizer with RVPlugPinDock_* named files. These require no extra hardware and lock to the tongue nicely with a simple wedge pin.
If these are too small for your 2 1/4" tube, here's another for 58mm: https://www.thingiverse.com/thing:4833588