Rostock Max v2 Layer Fan Mount by Crashin_Machines

Last crawled date: 3 years ago

1/12/17: I created a new lower profile fan mount to work with this e3dv6 mount: http://www.thingiverse.com/thing:1064131
This is a layer fan designed to keep the fan close to the hot end platform because the stock layer fan mount interfered with the enclosure I made. There is no hardware to use; simply slide it over a hot end platform tab. I have an E3Dv6 on my printer and it protrudes about 5/8" below the platform tabs. I have this mount going 1/2" below the tab it mounts on at a 20° angle to the hot end. It flows a good stream of air and I keep the fan at 80% because I don't want too much air flow interfering with the nozzle's temperature. I included a step file in case you wanted to modify anything for your own setup.