Thingiverse
Rostock Max EZStruder Heatsink Mount by noishi
by Thingiverse
Last crawled date: 3 years ago
Mount a heatsink and fan to the back of your NEMA17 extruder motor. Recommend using a thermal compound such as Artic Silver 5 to improve thermal conductivity. Wire this to any 12v source available, I tapped into the extruder fan so it is always on when the extruder is hot. I had issues printing PLA with my E3D as my extruder motor got to around 50c and softened the PLA enough to cause jams, this cooled my extruder enough, along with some other mods (mostly mchackneys nozzle bore modification) to be able to print smoothly with my E3d and PLA.
The slot on the side is a for an M3 screw to secure on as well as clearance for the motor wires.
http://www.amazon.com/gp/product/B00H8QRFU2?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00
The slot on the side is a for an M3 screw to secure on as well as clearance for the motor wires.
http://www.amazon.com/gp/product/B00H8QRFU2?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00
Similar models
thingiverse
free
Fan holder for extruder. Geeetech A10
...s pla getting soft and eventually getting eaten by the extruder gears, i mounted some heatsinks and this holder for an 40 mm fan.
thingiverse
free
Bulldog Lite Extruder, eBay E3D clone heatsink and Heatbed fan mount by friarfish
...er e3d heatsink. you can look at my photo and just count the number of fins.
whats next?
an add-on for a inductive sensor pickup
thingiverse
free
Mount 4010 fan for e3d V6 by houcemben
...ith finger the printed frame.
steady and dont loose with vabritions. you need to print in abs but its will work fine with pla .
thingiverse
free
Anet A8 Extruder Cover by soulgriefer
... the fan hinge to use it as a simple dust cover.
here is the original one for fan usage:https://www.thingiverse.com/thing:2573278
thingiverse
free
Printrbot Simple Metal extruder fan cover/mount by mattbeechan
...emoved the pins from the wire connector on the fan and inserted them into the fan connector about 6 inches down the wire harness.
thingiverse
free
Robo3D fan mount mod for E3D V6 hotend by Kals
...cstech's file, as i found the fan-mount designed for the v5 did not have enough room for this latest generation e3d extruder.
thingiverse
free
20BY mini direct Extruder by ryannining
... and hole distance 30mm.
i think it should still work for motor with 24mm diameter and distance 31mm
i will make other motor too.
thingiverse
free
Formbot Raptor Extruder (No heatsink fan) by Seeha3d
...ws custom supports for the section that supports the stepper. the fan mount was removed to allow the e3d v6 duct to fit properly.
thingiverse
free
Delta Dual Extruder Flying Mount by BobDavis73
...e to the heat generated by the hard working extruder motors. pla is just fine if you mount and wire up the fan as always on.
bob
thingiverse
free
40mm heatsink and fan mount for motor by msun2000
...fan 40mm x 40mm x 10.5mm
heatsink 40mm x 40mm x 11mm
no screw required, just apply thermal paste then push mount against motor.
Noishi
thingiverse
free
Bathroom Toothbrush or Razor Holder by noishi
...bathroom toothbrush or razor holder by noishi
thingiverse
a simple 2 piece bathroom holder for your razor or toothbrush.
thingiverse
free
HS1177 Camera Spacer by noishi
...e bracket and housing. it increases the surface area and friction between the bracket and the camera to make it much more secure.
thingiverse
free
Fatshark 600tvl to 32mm camera adapter by noishi
...shark 600tvl to 32mm camera adapter by noishi
thingiverse
adapter for mounting a fatshark 600tvl camera onto a 32mm camera mount
thingiverse
free
RcExplorer Tricopter Wire Bend Tool by noishi
...with the results so i made this. makes it easier to get the right shape, but it still takes a bit of effort to get it bent right.
thingiverse
free
Prop Balancer by noishi
...magnets, i had these sitting around:
http://www.amazon.com/gp/product/b0012auu84/ref=oh_aui_search_detailpage?ie=utf8&psc=1
thingiverse
free
GoPro + Fatshark 600 TVL Mount (For Tricopter) by noishi
...ro strap like on the original design, but can now also mount on the fatshark camera. make sure you adjust your cg after mounting!
thingiverse
free
X-Labs Shrike Mobius and RX Mount by noishi
...re it allows you to fit everything without extending your standoffs.
note: you'll need longer screws to fit the mobius mount
thingiverse
free
RC Explorer Tricopter Thicker Vibe Tray by noishi
....15mm carbon rod sitting around so i also added a 3.2mm hole near the front to insert a carbon fiber rod for additional rigidity.
thingiverse
free
Hovership MHQ2 Fatshark 600TVL FPV Mount by noishi
...urface is 10 degrees from horizontal. make sure you tilt the model in your slicing software 10 degrees before you start printing!
Ezstruder
thingiverse
free
EZStruder direct mount by HadesCorps
...irect mounting adapter for ezstruder with 40x40 fan mount. reused screws from the original bi mount and some of ezstruder screws.
thingiverse
free
EZstruder adapter for Printrbot+ by DonaldJ
...75 mm filament. with slight modification, the ezstruder can use the ubis hot end. no modification to the printrbot is required.
thingiverse
free
Planetary EZStruder Mount (geared stepper to EZStruder) by 626Pilot
...e the right screws to use with his, it's basically the same thing, so pick whichever one matches the screws you have on hand.
thingiverse
free
EZstruder Mounting Adapter by crkochan
... printer. the stepper itself is attached only to the ezstruder, so i also added a tab/shelf to support the bottom of the stepper.
thingiverse
free
EZStruder Mount for Prusa Mendel by nabilahmad
...in place very easily and locks in with a short piece of filament inserted in the end. uses hardware the comes with the ezstruder.
thingiverse
free
Hawkins Graber-i3 Ezstruder Mount by beardface
...hawkins graber-i3 ezstruder mount by beardface
thingiverse
graber i3 ezstruder mount with attachment for 50mm fan.
thingiverse
free
EZSTRUDER Special Rostock / Delta / Orion by le_tropezien
...ezstruder special rostock / delta / orion by le_tropezien
thingiverse
ezstruder special rostock / delta / orion
same seemecnc
thingiverse
free
EZStruder Replacement Cover by Minstrel
... the original cracked in two due to a very weak spot in the brittle plastic. this design has a bit of reinforcement in that spot.
thingiverse
free
SeeMeCNC EZstruder cooler by Disconnector
...r on my seemecnc rostock max was running very hot (like burn my hand hot!) so i designed a dual 40mm fan mount. all cool now :-)
thingiverse
free
EZStruder Mount for the Prusa i3 by sgraber
... with 30mm hole spacing for the extruder mount. print and enjoy!
[1] http://shop.seemecnc.com/ezstruder-cold-end-kit-70780.htm
Rostock
thingiverse
free
Endstop for Rostock by Raz0neR
...endstop for rostock by raz0ner
thingiverse
endstop for rostock.
thingiverse
free
Rostock Cooling by nobicore
...rostock cooling by nobicore
thingiverse
rostock cooling
thingiverse
free
ROSTOCK PARTS by OC3D
...rostock parts by oc3d
thingiverse
parts for our modified rostock extruder assembly
thingiverse
free
Rostock squirrel fan by MarioPanic
...rostock squirrel fan by mariopanic
thingiverse
rostock squirrel fan
thingiverse
free
FC Hansa Rostock by ron86
...fc hansa rostock by ron86
thingiverse
fc hans rostock logo
thingiverse
free
rostock mini carriage by cjol
...rostock mini carriage by cjol
thingiverse
carriage for my rostock mini project
thingiverse
free
Rostock and Rostock Mini Dual Extruder Mount by westonshakespear
...ht.
sorry about the pictures, my filament jammed for part of the print and i am waiting for a new part to print a better version.
thingiverse
free
Rostock mini clip by Scott_Chen
...rostock mini clip by scott_chen
thingiverse
rostock mini clip for printer base glass
thingiverse
free
Rostock Board holder by drewan
...rostock board holder by drewan
thingiverse
this is a clip for using a rostock board as a print surface.
thingiverse
free
Rostock Fan Bracket by ImprisonedByTime
...rostock fan bracket by imprisonedbytime
thingiverse
this bracket is for a 40mm fan to attach to the rostock 3d printer
Heatsink
thingiverse
free
Heatsink Model by 3DWaves
...heatsink model by 3dwaves
thingiverse
this is not a heatsink. please don't use this in place of a real heatsink.
thingiverse
free
Heatsink by Lowich
...tually tries to use it as a heatsink please let me know how it went. i'm curious. [also don't do it, it's a bad idea]
thingiverse
free
Heatsink Adaptor by mircho
...ttach a goose neck cable to a computer heatsink. the small openings are supposed to slide onto the fins of the heatsink radiator.
thingiverse
free
Interior Gold Heatsinks by speleoalex
...gold heatsinks by speleoalex
thingiverse
delorean timemachine heatsinks that mount on the rear bulkhead behind the drivers seat.
thingiverse
free
Replicator 2 Heatsink Spacer by IonEwe
...ionewe
thingiverse
this one piece heatsink spacer replaces the 2 standoffs between the fan and the heatsink on the replicator 2.
thingiverse
free
Naked Camera GoPro heatsink by OggiNao
...naked camera gopro heatsink by ogginao
thingiverse
naked camera gopro heatsink
thingiverse
free
Naked Camera GoPro heatsink by OggiNao
...naked camera gopro heatsink by ogginao
thingiverse
naked camera gopro heatsink
thingiverse
free
Naked Camera GoPro heatsink by OggiNao
...naked camera gopro heatsink by ogginao
thingiverse
naked camera gopro heatsink
thingiverse
free
DIY Heatsink concept... by DonaldJ
...iy heatsink concept... by donaldj
thingiverse
initial sample of an old idea i had to use a bundle of wires to create a heatsink.
thingiverse
free
Chip LED Case with Heatsink by c7h
...between the led and the heatsink to ensure a good heat transfer between the 2 parts.
i've used these heatsinks and some leds
Mount
thingiverse
free
Pen Mount on BLTouch mount by jetspot
...pen mount on bltouch mount by jetspot
thingiverse
pen mount on bltouch mount
thingiverse
free
RAM Mount, Mount by seanmclean
...ram mount, mount by seanmclean
thingiverse
bridging plate to attach ram mount to yamaha 242, for chartplotter placement.
thingiverse
free
Mount for mount for Garmin GPS by GNOBLIN
...you can use this mount for prevent rotation simple mount around hendelbars.
d handelbar 31.8mm
use m3 screw and din 16903 plug.
thingiverse
free
Permanent mount for Modular Mounting System by WIR14
...permanent mount for modular mounting system by wir14
thingiverse
permanent mount for modular mounting system.
thingiverse
free
Gopro Mount and antenna mount by SuperYoyo
...gopro mount and antenna mount by superyoyo
thingiverse
cut the carbon platform to pass the gopro mount and enjoy !
thingiverse
free
Hexagon Mount for 50mm Mount (Sparkcube) by Draman
...for 50mm mount (sparkcube) by draman
thingiverse
hexagon mount remix from skimmys hotend-mount for sparkcube or other 50mm-mount
thingiverse
free
mount by gixster
...mount by gixster
thingiverse
custom mount
thingiverse
free
Mount by Matrxi999
...mount by matrxi999
thingiverse
shelf mount
thingiverse
free
Motor mount
...motor mount
thingiverse
motor mount
thingiverse
free
GoPro Mount
...gopro mount
thingiverse
gopro mount