Thingiverse
Rostock Max Accelerometer Board Mount for 713Maker Hotend by DodgeDerek
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a quick part for attaching the SeeMeCNC HE280 accelerometer board to the 713Maker hot end mount. I haven't gotten the board wired in yet, but this looks like it will do the job just fine.
The part is held on to the hot end mount with the regular bolts for it and some 8mm M3 bolts to attach the board to the part.
The part is held on to the hot end mount with the regular bolts for it and some 8mm M3 bolts to attach the board to the part.
Similar models
thingiverse
free
Gyroscope / Accelerometer Mount by dgngdn
...ace by two nuts. the end is flexible so as to allow the mount to clip on a cylindrical object with outside diameter of about 8mm.
thingiverse
free
IR sensor mount for Geeetech G2S Pro by tim23x
... hot end. the sensor connector pokes through the mount. on my printer the sensor actuates when the nozzle is 1.5mm above the bed.
thingiverse
free
Rostock Maxx part fan mount by mikew123
...ot; keeps fan from drooping especially when using pla, slips over existing bolts on hot end.
i included the freecad source files.
thingiverse
free
Hexagon Hot End Fan Mount by ROBO3D
...fan mount by robo3d
thingiverse
here is a new edition of our hexagon hot end fan mount. pictures show where to attach it. enjoy!
thingiverse
free
Chimera Fan Mount for 40mm Hot end and 50mm Radial Part Cooling Fan by washout661
...n the stock 30mm) for the hot end and a 50mm radial fan for part cooling.
attaches using 2 m3 screws to the top of the heat sink.
thingiverse
free
Folger Tech FT-5 part cooling fan blower duct for 713Maker alu X carriage, e3d titan extruder, heat sink, volcano hot end by 3DGenera
...ons and tests this is what i ended up with. it all would have been 100x harder to do without the original 40mm and 50mm brackets.
thingiverse
free
base and cover for hot bed power expansion board for 3dprinter by mfsp
... power expansion board with size 60x70mm with m3 for board and m6 for profile bolts attachement. i used it for 3030 alu profile.
grabcad
free
Ender 5 Plus Hot End Mounting Bracket
...ender 5 plus hot end mounting bracket
grabcad
this part holds the hot end for the creality ender 5 plus.
thingiverse
free
J-Head style Mount by bstott
...e of this item is to attach a small fan to cool the hot end barrel. it has two incorporated screw holes for fastening a 25mm fan.
thingiverse
free
Solidoodle front side hot end retainer by edil
...the hot end to the jigsaw.
i added the new stl to same thingiverse thing, not replaced it, so the old thing is still available.
Dodgederek
thingiverse
free
Rostock Max V2 Belt Tensioner by DodgeDerek
...ostock max v2 without modifying anything. the only extra parts necessary are longer 6/32 machine screws. lowes had some in stock.
thingiverse
free
2 Piece Printrboard Case w/ Cable Management by DodgeDerek
...e case with built in cable management.
i have a larger volume printer so i went ahead and merged the pieces to save on hardware.
thingiverse
free
QUBD OneUp Gantry Belt Tensioner by DodgeDerek
...g further away. this worked pretty well, but i still wasn't able to get the belt as tight as i wanted so i added this inline.
thingiverse
free
Burley D'Lite Handlebar Mount 2004-2006 by DodgeDerek
...rent pictures are of the first revision. the part here is a better version, i will have pictures of the finished revision shortly
thingiverse
free
FSR Mounts - Rostock Max V2 by DodgeDerek
...ion with a suggested offset so hopefully it is close enough to work. please leave comments or send messages if anyone tries this.
thingiverse
free
QUBD OneUp Offset Fan Bracket by DodgeDerek
...d so far is the ducting hangs pretty low so clearances with the bed mounting and printer frame itself need to be checked closely.
thingiverse
free
QUBD OneUp X Gantry Replacement by DodgeDerek
...rt warping.
overall, i'm very pleased with the effects of this upgrade on the oneup printer. the gantry now feels very solid.
thingiverse
free
Rostock Max V2 Side Panel Venting by DodgeDerek
...ore than just running a quieter fan, but i think it looks cool.
i've also included a shroud to mount directly on an 80mm fan.
thingiverse
free
MPCNC Belt Mount/Tensioner by DodgeDerek
... cyde for spotting this and his remix. i have not tried these personally and if you need even more clearance check out the remix.
713Maker
thingiverse
free
713maker gantry with stock hotend cooler by calabris
...bris
thingiverse
this is a cooler/bltouch mount for the stock hotend with the 713maker gantry. this is still a work in progress
thingiverse
free
Duet IR sensor mount for 713maker extruder mount
...ial ir sensor , it should mount directly up to the 713maker extruder mount. #03 is made longer for use with the mosquito and bmg.
thingiverse
free
Ft-6 713Maker Tool head camera
...ms
is being used with a servo controled video switcher for programed/macro multi feed goodness
comments or questions are welcome!
thingiverse
free
E3D Titan/713Maker Ultralight - Crab Claw layer fan by onebaldman
...ded for the volcano)
50mm blower fan:https://www.amazon.com/gp/product/b008p72qys/ref=oh_aui_detailpage_o00_s00?ie=utf8&psc=1
thingiverse
free
E3D Aero/Volcano/713Maker Ultralight - Crab Claw layer fan by onebaldman
...tml
e3d aero/volcano
50mm blower fan:https://www.amazon.com/gp/product/b008p72qys/ref=oh_aui_detailpage_o00_s00?ie=utf8&psc=1
thingiverse
free
FT-5 713Maker Ultralight BMG V6 Part Cooler by sircrisp
...ithout removing the cooling ducts by sliding it out from underneath.
print with supports enabled except inside of holes and ducts
thingiverse
free
FT-5 Dual 45 breakout for 713maker mount by satgod
...akout for 713maker mount by satgod
thingiverse
this is a dual rj-45 breakout mount for the ft-5 using a 713-maker extruder mount
thingiverse
free
Ft-6 713Maker V2
...g
the only odd-ball thing needed is 2 screws of 2.5mmx20mm (found at hardware store)
and a handfull of m3 button head screws+nuts
thingiverse
free
713Maker Ultralight Spacer for E3d AERO by travelphotog
...tact us through our 713maker fb page ( https://www.facebook.com/713maker/) and we can get one of the milled spacer sent your way.
Accelerometer
3d_export
$35
chevrolet camaro
...other 3d software. has car interior details; seat, pheromone, accelerometer a short video of this project has been uploaded...
3dfindit
free
Embedded Accelerometers
...embedded accelerometers
3dfind.it
catalog: te connectivity
thingiverse
free
Accelerometer Case by lakephall
...celerometer sensor face-down. the tabs on the side are meant to allow for half-inch hook and loop straps to hold down the sensor.
thingiverse
free
WIMUv3 Accelerometer Calibration Fixture by M_G
... be placed in a known position on the test apparatus to aid in the repeatable calibration of said accelerometer containing device
thingiverse
free
U-Bracket for GDX Accelerometer by vernier
...ernier
thingiverse
this bracket is used with the gdx accelerometer.
this bracket is designed to be used with a 1/4-20 screw/nut.
thingiverse
free
3D printed MEMS accelerometer by adamweld
... the device was envisioned to be simple and easy to understand while using the same operating principles as a mems accelerometer.
thingiverse
free
Tube Plate for GDX accelerometer by vernier
...be plate is used to mount the gdx accelerometer.
this plate (and the accompanying bracket) are designed around 1/4-20 fasteners.
thingiverse
free
Gyroscope / Accelerometer Mount by dgngdn
...ace by two nuts. the end is flexible so as to allow the mount to clip on a cylindrical object with outside diameter of about 8mm.
thingiverse
free
Box for gyro accelerometer board by robsteele
...by andy mark. it will require tapping 4 holes for #4 screws. the top parts has a hold for a 10-24 screw for holding the box down.
thingiverse
free
Donkeycar GY-521 accelerometer and gyro support
...his one:https://fr.aliexpress.com/item/1028067742.html
probably not the best. need a super quiet (stable with no spike) power in.
Rostock
thingiverse
free
Endstop for Rostock by Raz0neR
...endstop for rostock by raz0ner
thingiverse
endstop for rostock.
thingiverse
free
Rostock Cooling by nobicore
...rostock cooling by nobicore
thingiverse
rostock cooling
thingiverse
free
ROSTOCK PARTS by OC3D
...rostock parts by oc3d
thingiverse
parts for our modified rostock extruder assembly
thingiverse
free
Rostock squirrel fan by MarioPanic
...rostock squirrel fan by mariopanic
thingiverse
rostock squirrel fan
thingiverse
free
FC Hansa Rostock by ron86
...fc hansa rostock by ron86
thingiverse
fc hans rostock logo
thingiverse
free
rostock mini carriage by cjol
...rostock mini carriage by cjol
thingiverse
carriage for my rostock mini project
thingiverse
free
Rostock and Rostock Mini Dual Extruder Mount by westonshakespear
...ht.
sorry about the pictures, my filament jammed for part of the print and i am waiting for a new part to print a better version.
thingiverse
free
Rostock mini clip by Scott_Chen
...rostock mini clip by scott_chen
thingiverse
rostock mini clip for printer base glass
thingiverse
free
Rostock Board holder by drewan
...rostock board holder by drewan
thingiverse
this is a clip for using a rostock board as a print surface.
thingiverse
free
Rostock Fan Bracket by ImprisonedByTime
...rostock fan bracket by imprisonedbytime
thingiverse
this bracket is for a 40mm fan to attach to the rostock 3d printer
Hotend
thingiverse
free
hotend by fablab_lueneburg
...hotend by fablab_lueneburg
thingiverse
hotend model
thingiverse
free
Hotend for Graber
...hotend for graber
thingiverse
hotend complement pastes for graber printerhttps://youtu.be/0koxhnsuhdy
thingiverse
free
Hotend adapter by antaviana
...hotend adapter by antaviana
thingiverse
hotend adapter
thingiverse
free
hotend fan by mming1106
...hotend fan by mming1106
thingiverse
hotend fan
thingiverse
free
Hotend schema by ione
...hotend schema by ione
thingiverse
hotend project schema
thingiverse
free
Fabtotum XY Hotend holder for E3D Hotend
...s with integrated supports.
more for the project you can see here: https://kf-designs.com/2019/09/07/fabtotum-printer-conversion/
thingiverse
free
HotEnd Stand by onepointdiy
...tend, when you make your new hotend or repair your j-head or mg-plus hotend.
the hole of 16mm, please adjust using a reamer, etc.
thingiverse
free
fast magnetic hotend changer for Chimera Hotend by Draman
...chimera hotend !
and new basis (the hole from original is to small)
it is a remix form skimmy's fast magnetic hotend changer
thingiverse
free
Hotend Fan Adapter for MicroSwiss All Metal Hotend by jo_schi_man
...
thingiverse
little change for the hotend fan adapter to hold the microswiss all metal hotend (slightly longer and sharp edges).
thingiverse
free
Merlin Hotend by Alejanson
...merlin hotend by alejanson
thingiverse
this is a 1:1 drawing of the classic merlin hotend.
Board
archibase_planet
free
Board
...e planet
board information board bulletin board
board information n310813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
board cutting board kitchen ware
board n051011 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
board blackboard school board
board school n290114 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
slate board
board - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
blackboard board school furniture
board - 3d model for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
board shelf stand
board - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
kitchen ware board
board - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
kitchen ware board
board n150410 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
board office supplies stationery
board - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
board gym
board evminov n240613 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)