Thingiverse
Rope pulley katrol by wingmaster
by Thingiverse
Last crawled date: 3 years ago
Rope pulley
The pulley diameter is 31 mm with a 6 mm groove. It uses 2 bearings for a smooth operation. The rope on the picture is 5 mm and runs very nice through it.
It is possible that a bit of sanding is needed to make the bearing fit in the pulley.
Parts to print:
2 sides
1 ring
1 pulley
I printed them with (transparent) ABS 0.3 mm at 90% fill. Will also work with PLA or other plastics.
No support is needed. The pulley wheel has a designed in support. You need to break this out.
Other bits needed:
2x M4x25 (shown on photo. They just fit without washers) or M4x30 (better) bolts
2x M4 lock nuts
4x M4 washers (optional)
2x bearing 624ZZ 4x13x5
The pulley diameter is 31 mm with a 6 mm groove. It uses 2 bearings for a smooth operation. The rope on the picture is 5 mm and runs very nice through it.
It is possible that a bit of sanding is needed to make the bearing fit in the pulley.
Parts to print:
2 sides
1 ring
1 pulley
I printed them with (transparent) ABS 0.3 mm at 90% fill. Will also work with PLA or other plastics.
No support is needed. The pulley wheel has a designed in support. You need to break this out.
Other bits needed:
2x M4x25 (shown on photo. They just fit without washers) or M4x30 (better) bolts
2x M4 lock nuts
4x M4 washers (optional)
2x bearing 624ZZ 4x13x5
Similar models
thingiverse
free
Geeetech A10 Filament Guide With Ball Bearings 608 by Estep
...rew m4 x 20 mm
3x self-locking nuts m4
6x washers m4
2x screw m3 x 20 mm
2x self-locking nut m3
4x washers m3
3x ball bearing 608
thingiverse
free
Pulley block (soft mount) for 7-8mm OD rope by MachineKing
...e it into the pulley block. insert the rope through the pulley block, the washers and the 608 bearing as seen in the photo's.
thingiverse
free
GT-2 10 mm Idler Pulley
...y. it is designed so that the bearings can be press-fitted with little force. it can be installed on m4 bolts of suitable length.
thingiverse
free
Dual Z Rod Holder support by fwm
...ed the screws below
4x 20mm m3 screws
4x m3 nuts
4x m3 washer
4x m4 t nuts
4x m4 10mm screws
2x (8x16x5mm) bearing model 688-2rs
thingiverse
free
Universal spool holder by JakesterDS
...se
this is what you need:
140mm m4 rod
2x m4 locknut
2x 22x8x7 ball bearings
two adapters to fit the m4 rod in the ball bearings
thingiverse
free
Idler Pulley for 624 Bearing and GT2 belt by peaberry
...d with 8mm od x 4mm id x 3.5mm height, which was needed with the drawing robot, to add a bit of clearance to fit the new pulleys.
thingiverse
free
Tracing dimension by TeamM
... 5 mm increments.
left scale in 2 mm increments.
required:
1x part 1
1x part 2
2x part 3
2x m4 nut
2x m4x12 bolt
2x 4,3 mm washer
thingiverse
free
Weightless extruder mod QQ-S Pro by jlovold
... filled with a bit of water.)
m4-bolts will be self-tapping
my flying-extruder design:
https://www.thingiverse.com/thing:4888099
thingiverse
free
608 bearing pulley by DarthCorvus
...t spool. it is actual if you have a lot of filament spools in line.
warning! you must to pause the printing and drop the bearing.
thingiverse
free
Micromake C1 main belt tensioner by Lapinoo
...ded to allow to put a gt2 idler instead, which is wider than the bearings).
for the holder assembly
4x m3x10 screws
4x m3 t-nuts
Katrol
Wingmaster
thingiverse
free
1W star LED model in stl and openscad by wingmaster
...1w star led model in stl and openscad by wingmaster
thingiverse
model of 1w star led.
thingiverse
free
Mk8 gear model in STL and openscad by wingmaster
...ed to push filament through an extruder.
to be clear: this is the model of a metal mk8 gear. it is not intended to be printed.
thingiverse
free
Pinball Eject shield by wingmaster
...on my new blog: http://3dwingmaster.blogspot.com/ describing my quest for a pinball using most parts made with a 3d printer.
thingiverse
free
Pinball Ball Standin by wingmaster
...look on my new blog: http://3dwingmaster.blogspot.com/ describing my quest for a pinball using most parts made with a 3d printer.
thingiverse
free
Kite Line Winder by wingmaster
... hold in place on both sides, it is not in the way during winding and unwinding.
added the freecad design file.
happy kiting!
thingiverse
free
Filament Guide for Filament Extruder Puller by wingmaster
... in the middle.
after you put the filament through the puller, you put on this extra guide to limit the filament side movement.
thingiverse
free
Graphical display support for Mendel90 and others by wingmaster
...e.com/thing:87250 or in this improved version http://www.thingiverse.com/thing:617468.
then print out these supports to mount it.
thingiverse
free
This is an alternative Idler design for the Filament extruder puller by wingmaster by glassy
...lcome to tip me:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=u25v96gznvl3n&source=url
thank you!
thingiverse
free
Geared Motor Model in STL and openscad by wingmaster
...puller" http://www.thingiverse.com/thing:677144
the openscad also contain the a function that can create the screw holes.
Rope
thingiverse
free
Rope clamp
...rope clamp
thingiverse
clamp for ropes from 4 - 10mm
thingiverse
free
rope tensioner by Muffin256
...rope tensioner by muffin256
thingiverse
rope tensioner
thingiverse
free
Rope Adjuster by naoto64
...e adjuster by naoto64
thingiverse
this is a rope adjuster. the diameter of the hole is 3 mm. suitable for ropes of 2 mm or less.
thingiverse
free
Jump Rope by rolfjunior
...jump rope by rolfjunior
thingiverse
it is a handle for a jump rope. i used a 2mm steel wire with a plastic cover for the rope.
thingiverse
free
Rope Hook by Joeleonardo
...rope hook by joeleonardo
thingiverse
a simple rope hook.
thingiverse
free
rope spool by Master314
...rope spool by master314
thingiverse
wrap rope neatly with it
thingiverse
free
Rope Tensioner by ts2a
...rope tensioner by ts2a
thingiverse
this is a rope tensioner for camping etc.
thingiverse
free
Rope winder
...rope winder
thingiverse
for fishing
thingiverse
free
rope reel by ddevins
... reel by ddevins
thingiverse
you need a 550 motor and rope put the 550 motor in the holes and tie your rope around the cylinders
thingiverse
free
Hook on a Skipping rope
...hook on a skipping rope
thingiverse
the only a simple holder for skipping rope.
Pulley
thingiverse
free
pulley
...pulley
thingiverse
pulley 10 mm bearing
thingiverse
free
Pulley
...pulley
thingiverse
pulley for yachting.
bearing from inline skates
thingiverse
free
pulley for pulley system by STEMStix-N-Bitz
...pulley for pulley system by stemstix-n-bitz
thingiverse
this is the pulley for the pulley system
thingiverse
free
pulley by Thompie
...pulley by thompie
thingiverse
pulley
thingiverse
free
Pulley by joestraws
...pulley by joestraws
thingiverse
pulley
thingiverse
free
Pulley by oldvirus
...pulley by oldvirus
thingiverse
pulley
thingiverse
free
pulley by pully
...pulley by pully
thingiverse
a working pulley.
thingiverse
free
pulley by lluiscolomer
...pulley by lluiscolomer
thingiverse
pulley for dc motor
thingiverse
free
pulley by themaker132
...pulley by themaker132
thingiverse
a pulley because why not
thingiverse
free
Pulley by Britsa007
...ing a motor with 2 rubber bands. pulley connects to an m6 nut.
44mm pulley are to move an arm of my homemade cnc milling machine.