Thingiverse
ROLLER GUIDE SYSTEM by efliq
by Thingiverse
Last crawled date: 3 years ago
I'm developed and design roller system - fitted to case W: 28cm H: 28cm, because many plastics bags with breads looks horrible!
Now my kitchen looks more luxury! No more bags looks out from the case!
I'm tried to do an optimized shape for 3D printing, especially is setup for 0.4 nozzle system. 2 times drive around the shape and next layer. Optimized for the nozzle, speed, material needs.
You can find parts:
1 Guide: rails, turns, ends
1 Roll: Mainpart, Holder+end, Closure End part
I made a bigger portfolio of formats for you. Designed in Autodesk Inventor.
Formats: .igs, .stp .ipt
Version 1: Shape = S / 0.8mm of Shell / no problem for printing stability!
Version 2: Is not stable for printing, in higher positions is melted by the extruder. I will work on it to optimize!
Printing time and process:
Based on quality what was required is printing time really low and used a middle fan. Bigger transport speed can drop down the parts, especially big risky is in the higher places of the part!
Material: Colorfabb black PLA
Layer: 0,1mm
Temperature: between proposed temp from producer of material
Time: 1Roll: 3,45hours
I advise doing bigger BRIM for better sticking to bed.
I'm printed:
ROLLS: 32 + 2 holders + 2 closures
GUIDE RAILS: 12 mid + 12 end + 4 turn
In total aprox 70 hours of printing.
So, I hope that will helpfully also for your open cases at your home!
In further question feel free to contact me.
Would be nice if you will connect on my facebook page, which is actualized with freshly printed things and photos!https://www.facebook.com/3D.obiecto/
Thank you
Efliq from 3D Obiecto!
Now my kitchen looks more luxury! No more bags looks out from the case!
I'm tried to do an optimized shape for 3D printing, especially is setup for 0.4 nozzle system. 2 times drive around the shape and next layer. Optimized for the nozzle, speed, material needs.
You can find parts:
1 Guide: rails, turns, ends
1 Roll: Mainpart, Holder+end, Closure End part
I made a bigger portfolio of formats for you. Designed in Autodesk Inventor.
Formats: .igs, .stp .ipt
Version 1: Shape = S / 0.8mm of Shell / no problem for printing stability!
Version 2: Is not stable for printing, in higher positions is melted by the extruder. I will work on it to optimize!
Printing time and process:
Based on quality what was required is printing time really low and used a middle fan. Bigger transport speed can drop down the parts, especially big risky is in the higher places of the part!
Material: Colorfabb black PLA
Layer: 0,1mm
Temperature: between proposed temp from producer of material
Time: 1Roll: 3,45hours
I advise doing bigger BRIM for better sticking to bed.
I'm printed:
ROLLS: 32 + 2 holders + 2 closures
GUIDE RAILS: 12 mid + 12 end + 4 turn
In total aprox 70 hours of printing.
So, I hope that will helpfully also for your open cases at your home!
In further question feel free to contact me.
Would be nice if you will connect on my facebook page, which is actualized with freshly printed things and photos!https://www.facebook.com/3D.obiecto/
Thank you
Efliq from 3D Obiecto!
Similar models
thingiverse
free
zen roller 79mm replacement part by peanuthead50
... mid print.
i suggest using a higher quality setting because it ends up printing better and working smother. :) have fun rolling!
thingiverse
free
Makita Guide Rail Splinter Guard Cover by ksuszka
...after the print.
to fully protect your rail you will need:
1x rail guide left cap
1x rail guide right cap
2x splinter guard cover
thingiverse
free
Arduino lcd shield case by alanhinchcliffe
...nest-ustepper-motion-time-lapse-video-rail/
im new to 3d printing and 3d design so i created this thing in windows 3d builder app
thingiverse
free
Filament Roller Guide - Use 2 Prusa MMU2 Trays as a 3 Filament Spool Roller
...any style, i like these metal shielded bearings but your preference may be different
2x prusa mmu2 complete filament roller trays
thingiverse
free
Nozzle Probe Guide by Steamboat_Ed
...big target to guide the tiny wire into the tip of the nozzle.
this would be better if it could be made of metal but i'm lazy.
thingiverse
free
Dyson Quick Release Nozzle V7 V8 V10 by adjuro
...st to use support for the hanging parts.
for better finishing i print the lock with 0.1 resolution.
for the nozzle i choose 0.2mm
thingiverse
free
Chip Clip and bag closure with Solidworks 2014 Source by DarkAlchemist
...ion was just not strong enough to hold it closed especially if the bag fell over.
.
i retained his nice bag closure part as well.
thingiverse
free
Solitaire
...nd a slyer hight of 0,2mm. the infill is 50% not in case of stability, but the weight increases, so it suggests a higher quality.
thingiverse
free
Filament Roller | Bearing
...me threads at the end of the liner, size is m5.
since the roll has a lot of space, it is suitable for any size of filament roll.
thingiverse
free
Big Filament Roller Guide (Remix)
... this is the only filament guide i use.
my printer needs much clearance (>0.7mm), so maybe it's too much for your printer.
Efliq
thingiverse
free
Knock box by efliq
...knock box by efliq
thingiverse
big knockbox 10 x 10 cm for more than 1 cofee
thingiverse
free
CLIP BOX by efliq
...se
box with back clip and opening cover.
2 chamfers (front and right side) for easier opening of cover by finger.
90 x 60 x 90mm
thingiverse
free
Mazzer Super Jolly Automatic funnel by efliq
... 1 or 2 coffee.
end of funnel is not in contact with mill-stones. small gap between funnel and walls.
let's take a coffee! ;)
thingiverse
free
Handcuffs box by efliq
...refully with optimized speed and maximum layer what is possible.
lets look and follow us on facebook:
www.facebook.com/3d.obiecto
thingiverse
free
Cutting Board drying rack by efliq
...ave a material but stay robust for big and heavy boards.
in next few days i will bring box under the dryer fot catching a water.
thingiverse
free
Magazine holder (wall mounted) by efliq
...ting bed 20 x 20 x20 (i had a problem on highest point of printing where last few layers was melted, because of not enough fan...
thingiverse
free
Cutting board drying rack (4 slots) by jujubees
...drying rack (4 slots) by jujubees thingiverse remix of efliq#39;s board drying rack, expanded to hold 4 boards. i...
thingiverse
free
HOLDER FOR PAPER TOWELS by efliq
... can use only shorts profile - looks better.
http://www.instructables.com/member/jean-paule/https://www.facebook.com/3d.obiecto/
thingiverse
free
Cutting board Rack x3 by Matearoa
...13 x 8,5 cm i remixed the file from efliq to hold 3 boards instead of...
Roller
thingiverse
free
Roller
...roller
thingiverse
roller for a 75mm tape gun.
thingiverse
free
Rollers on Track Rollers
...physics exercise "roller's on track". i won't link to the exercises as this will short-circuit some learning.
thingiverse
free
roller by Warwick3D
...roller by warwick3d
thingiverse
roller
thingiverse
free
roller by justinbarrera14
...roller by justinbarrera14
thingiverse
roller
thingiverse
free
Roller by shvanmajd
...roller by shvanmajd
thingiverse
roller
thingiverse
free
roller by justinbarrera14
...roller by justinbarrera14
thingiverse
roller 1
thingiverse
free
Roller by sekom
...roller by sekom
thingiverse
roller toy
thingiverse
free
lint roller
...lint roller
thingiverse
for sticky lint rollers
thingiverse
free
roller cookie
...roller cookie
thingiverse
roller cokie form
thingiverse
free
fidget roller
... in your hand
print the caps once and the rollers twice
i recommend printing the lids on 100% infill and the rollers on about 10%
Guide
thingiverse
free
Filament guide (Guide-Fil) by phobosmoon
... by phobosmoon
thingiverse
another filament guide, with cap.
put some double-sided tape under the guide to fix it on your table.
thingiverse
free
Wide Guide and Single Guide by norrillous
...needed some single guides also. i found the ikea lack filament guide by karnschi so i added them in to .stl file as well... enjoy
thingiverse
free
diabolo guide
...diabolo guide
thingiverse
diabolo guide for r6 2011
thingiverse
free
Filament guide
...rse
this filament guide is to be used with the spare roller guide when you replaced the plastic extruder with the aluminum one.
thingiverse
free
Filament Guide Tube Guide by Mrrocketman
...e (e.g. bowden cable) on your prusa.
you can purchase the guide here: http://www.mcmaster.com/#8547k23
i recommend a 2ft length.
thingiverse
free
Wire guide for extruded aluminum and filament guide by Todd_Optional
...ilament guide by todd_optional
thingiverse
this is a wire guide and wire guide with filament guide for 20x40 extruded aluminum.
thingiverse
free
PTFE Guide
...piece of ptfe tube in (od of ~4.1mm) to guide filament to the direct drive.
without it the filament spool was unraveling spaghet.
thingiverse
free
FILAMENT GUIDE
...ww.thingiverse.com/thing:3184808
to be used with: ender 3 filament guide by mattellisonhttps://www.thingiverse.com/thing:3059604
thingiverse
free
Guide porte, door guide by vieen3d
...guide porte, door guide by vieen3d
thingiverse
pièce pour guider une porte coulissante
thingiverse
free
Lower Guide for Truvativ X-Guide Chain Guide by jordandandersen
...ntial part.
tested using makerbot thing-o-matic using abs plastic.
fork it on github: https://github.com/servetus/lowerguide
System
thingiverse
free
Coordinate system
...coordinate system
thingiverse
coordinate system
thingiverse
free
ACRO SYSTEMS DRAG CHAIN SYSTEM by dragonfire81m
...acro systems drag chain system by dragonfire81m
thingiverse
chain link mounting system for acro system openbuilds
thingiverse
free
Circulatory System
...circulatory system
thingiverse
made in a 3d design software
designed for students
circulatory system based on images
thingiverse
free
Clutch system
...clutch system
thingiverse
clutch system inspired from lego technics kit
print with default settings
thingiverse
free
Gear system test-Systeme d'engrenage Test by CPS007
...gear system test-systeme d'engrenage test by cps007
thingiverse
gear system test-systeme d'engrenage test
13cm7cm7cm
thingiverse
free
Pulley System by LeapFrog_3D
...pulley system by leapfrog_3d
thingiverse
pulley system
thingiverse
free
System Block by CryoShift
...system block by cryoshift
thingiverse
system block
thingiverse
free
System administrator by Diodmag
...system administrator by diodmag
thingiverse
system administrator, sculpting
thingiverse
free
L.A. Systems by Bjorn175
...l.a. systems by bjorn175
thingiverse
l.a. systems mold
thingiverse
free
Decken Montage-system
...decken montage-system
thingiverse
decken montage-system