robot hand || bionic hand prosthesis prototype by Bribro12

Last crawled date: 3 years ago

Video can be found here: https://www.youtube.com/watch?v=Qu_x8T9408U
STL and Fusion 360 source files can be found here: https://bbprojects.technology/collections/stl-fusion-360-source-files/products/robot-hand-bionic-hand-prosthesis-prototype
This bionic hand is controlled by an arduino nano V3 and uses 4 15kg servo's to move the index, middel, ring and little finger and 3 9g servo's to rotate the thumb and pull the tumb and the fingers open. This bionic hand it's structure is modelled after my hand so I could make a gel10 mold that would fit snug around it. I originally wanted to integrate some force feedback in the finger tips by using some small pushbuttons but that didn't turn out to well because the wires from the pushbuttons in combination with the gel10 mold caused to much friction in the joints of the fingers and the fingers had to push to hard to activate the pushbuttons. I'm now going to do some tests with currentsensors so I can messure the current going to the servo's and when the current goes above the normal level then the servo's would stop (that's the idea).
More info can be found here: https://hackaday.io/project/102439-robot-hand-bionic-hand-prosthesis-prototype
Components used:
4 × 15kg Servo's
link: https://www.banggood.com/MG995-High-Torgue-Mental-Gear-Analog-Servo-p-73885.html?rmmds=search&cur_warehouse=CN
1 × 2.54mm Single Row Male Pin Header Strip For Arduino
link: https://www.banggood.com/10-Pcs-40-Pin-2_54mm-Single-Row-Male-Pin-Header-Strip-For-Arduino-p-918427.html?rmmds=search&cur_warehouse=CN
2 × 9g servo's
link: https://www.banggood.com/TowerPro-SG90-Mini-Gear-Micro-Servo-9g-For-RC-Airplane-Helicopter-p-1009914.html?p=E01411629100201406T1&custlinkid=359550
1 × arduino nano V3
link: https://www.banggood.com/Geekcreit-ATmega328P-Nano-V3-Module-Improved-Version-With-USB-Cable-Development-Board-For-Arduino-p-933647.html?p=E01411629100201406T1&custlinkid=255135
1 × DC-DC Step Down Adjustable Constant Voltage Current Power Supply Module
link: https://www.banggood.com/LM2596-DC-DC-Verstellbar-Step-Down-Schaltregler-Power-Supply-Module-p-88252.html?p=E01411629100201406T1&custlinkid=255154
1 × 2S lipo 7.4V
link: https://www.banggood.com/7_4V-2S-2000mAh-8C-Lipo-Battery-Compatible-for-Frsky-ACCST-Taranis-Q-X7-Transmitter-p-1249125.html?p=E01411629100201406T1&custlinkid=669244
2 × 5mm red LED
link: https://www.banggood.com/Geekcreit-375pcs-3MM-5MM-LED-Light-Emitting-Diode-Beads-Resistance-Lights-Kits-Bulb-Lamp-p-1027601.html?p=E01411629100201406T1&custlinkid=669272
2 × pushbutton
link: https://www.banggood.com/100pcs-Mini-Micro-Momentary-Tactile-Tact-Switch-Push-Button-DIP-P4-Normally-Open-p-917570.html?p=E01411629100201406T1&custlinkid=669260
2 × 200 ohm resistor
link: https://www.banggood.com/Wholesale-Geekcreit-600pcs-30-Kinds-Value-1-14W-Metal-Film-Resistor-Assorted-Kit-20pcs-Each-Value-p-53320.html?rmmds=search&cur_warehouse=CN
3 × springs from old pens
1 × 1mm diameter steel rod or similar as shafts for the fingers
1 × nylon wire
1 × somewhat larger spring but less stiff as the springs from the pens
this spring brings the thumb back to it's original position. I just used one I had lying around and I thought was gonna work
Recommended Tools:
3D-printer: https://www.banggood.com/Creality-3D-Ender-3-Pro-V-slot-Prusa-I3-DIY-3D-Printer-Kit-p-1346320.html?p=E01411629100201406T1&custlinkid=677427
All my project files, instructions, schematics, are provided for free so everyone around the world can enjoy them. Feel free to support me so I can create and share even more awsome projects. Any amount of support is greatly appreciated :-) paypal.me/BrianBrocken
Feel free to take a look at my other designs:
3D printable antweight battlebot: Bulldog: https://www.thingiverse.com/thing:4623536
SpaceX inspired edf rocket: https://www.thingiverse.com/thing:4606751
3D printed high torque servo/gearbox version 2: https://www.thingiverse.com/thing:4547703
UMC - Universal motion controller: https://www.thingiverse.com/thing:4245315
3D-printable Davinci catapult gift card: https://www.thingiverse.com/thing:4067668
Arduino controlled photogrammetry 3D-scanner: https://www.thingiverse.com/thing:3958326
Fully 3D-printable turntable: https://www.thingiverse.com/thing:3723618
RC FPV tank rover: https://www.thingiverse.com/thing:3587738
Fully 3D-printable wind-up car gift card: https://www.thingiverse.com/thing:3308710
3D-printable High torque servo/gear reduction: https://www.thingiverse.com/thing:3292860
'BOOM box' high voltage capacitor bank case: https://www.thingiverse.com/thing:2980012
Subby the interactive youtube subscriber robot: https://www.thingiverse.com/thing:2928254
robot hand || bionic hand prosthesis prototype: https://www.thingiverse.com/thing:2838239
3D-printable linear actuator: https://www.thingiverse.com/thing:2783959
Mini 3D-printable crossbow: https://www.thingiverse.com/thing:2710472
8 legged spider robot: https://www.thingiverse.com/thing:2470882
best 3D-printable bearing: https://www.thingiverse.com/thing:2349065
Have a nice day!