RifRaf Terraforming Mars Tile Base Inserts for 3D Mars Board by Srifraf

Last crawled date: 4 years, 1 month ago

Printed on a single extrusion printer with different color filament layer changes.
These are a quick alternative to the great Tiles that gr33n_fr0g did for the 3D base he created. I started these a couple years ago and never got around to finishing a base for them and then gr33n_fr0g came along with his great Planet Base for any tiles my size and with some slight mods they fit great. These tiles are not very "3Dish" and are very thin, easy to place and are big enough to fit tight and stay in the board if you so desire, they mirror closely the original game and of course can be placed wherever you like on the base.
I did need to print with a .10mm layer height and use a .25mm nozzle to get good detail in the text.
This is the great 3D base made by : gr33n_fr0ghttps://www.thingiverse.com/thing:3910734
These are the Rifraf Terraforming Mars Tiles full set:https://www.thingiverse.com/thing:3153866
It will be some time before I can get to the other maps, but yes I hope to do those as well.
Here are the printing layer heights:
With .25 Noz and .10 layer height, -first layer .20
For the "land" tiles
Started with Golden
Change at .30 to Red/Brown
Change at .70 to Golden
For "Ocean" Tiles
Start with Golden
Change at .30 to Red/Brown
Change at .70 to Golden
Change at .80 to Trans Blue
If you want to try for a .15mm layer with .25 Noz
For the "land" tiles
Started with Golden
Change at .35 to Red/Brown
Change at .65 to Golden
For "Ocean" Tiles
Start with Golden
Change at .35 to Red/Brown
Change at .65 to Golden
Change at .80 to Trans Blue