Rifle Case Feeder MODS by Jogurtek

Last crawled date: 3 years ago

My mods to solve few of the problems I ran into, when making the casefeeder. Big thanks to all the original designers! :) Thank you for a great job.
I made a quick-detach system for a spring, used when you want to mount your casefeeder on the original Dillon mounting "pipe" using Stahs Dillon mount.(https://www.thingiverse.com/thing:4145271/files) Casefeeder droptube and casefeed adapter on the D650 doesn't line up, so you can't use dillon plexi tube, or any other straight tube. I used modified QD spring system from tom_penns Collator mods. (unfortunately no longer available here on thingiverse, excellent mods for Ammo_mikes bullet collator)
I designed it to use cheap 14mm outer diameter (1mm wire diameter) extension spring from Aliexpress, such ashttps://www.aliexpress.com/item/32812888754.html?spm=a2g0s.9042311.0.0.27424c4dZ0HMtt
But it should be easily remixable for any other diameter spring
ADDED/UPDATES:
pistol_feeder_tube_QD - Modified pistol feeder tube with integrated QD mount
pistol_feeder_tube_QD_9mm - changed inner diameter of the drop tube from 13mm to 11mm around the place where the induction sensor is mounted, mitigating the occasional failure to detect the case (9mm), due to the tilted case being to far away from the sensor, resulting into pretty thorough jam afterwards.
casefeeder_droptube_QD_adapter - simple QD adapter that can be glued in to the existing droptube, if you don't feel like reprinting the whole thing.
press_adapter_QD_spring_mount - replacement for Dillon nylon 9mm casefeed adapter/bushing from Dillon conversion set with integrated QD mount.
droptube_QD_spring_mount - QD spring mount for casefeeder drop tube (the upper one)

press_adapter_QD_spring_mount - QD spring adapter for press_adapter_QD_spring_mount (the lower one)

casefeeder_control_panel - unrelated. My go at a casefeeder control panel using 3-pin PCB connector to attach the induction sensor for easy removal in need of mainanance or disassambly. Also added two LEDs indicating the power on/off and buffer full. (had to use 5-pin automotive relay instead of 4-pin
Remixed from:https://www.thingiverse.com/thing:4257637https://www.thingiverse.com/thing:4145271
Tom-Penns collator mods (no longer on thingiverse)
Photos are coming soon... :)