Thingiverse
Ride height gauge for 1/10-scale RC Buggy by eayars
by Thingiverse
Last crawled date: 3 years ago
Most 1/10-scale RC buggies need to be set to a ride height of 23mm, 24mm, or 25mm. Or some combination thereof: Losi 22's are often set to 23/24 front/rear.
This not-quite-cubical block has three lengths: 23mm, 24mm, and 25mm. Just drop the buggy onto a smooth surface, then adjust the ride height so that this block just slides under the chassis when the desired number is right-side up. In other words, if you look at the block from the side and the '24' is right-side-up on the side of the block, then that side of the block is 24mm high.
Mine is printed in ABS on a Solidoodle, and works great.
This not-quite-cubical block has three lengths: 23mm, 24mm, and 25mm. Just drop the buggy onto a smooth surface, then adjust the ride height so that this block just slides under the chassis when the desired number is right-side up. In other words, if you look at the block from the side and the '24' is right-side-up on the side of the block, then that side of the block is 24mm high.
Mine is printed in ABS on a Solidoodle, and works great.
Similar models
thingiverse
free
Ride Height Gauge for 1:10 Off Road RC Buggys by seddondigital
... mins @
0.1mm layer height
1.2mm wall thickness
20% fill
50mm/s print speed.
15 grams of material
please post your made photos.
thingiverse
free
Ride Height Gauge Block by Tonyscardina
...a 17/18/19mm ride height gauge for radio control car setup. the sizes were chosen for my 1/10 scale buggy for astro turf racing.
thingiverse
free
Ride Height Gauge Blocks
... slide the block underneath with the number facing up, check that the chassis is hitting but not resting on it. cheap and easy.
thingiverse
free
1:10 scale RC buggy camber gauges (0-3°) by en7rha
... scale rc buggy camber gauges (0-3°) by en7rha
thingiverse
a set of camber gauges that work with 2.2" 1:10 rc buggy wheels.
thingiverse
free
Ride Height Gauge Block by Tonyscardina
...ride height gauge block by tonyscardina
thingiverse
23/24/25mm ride height gauge block
thingiverse
free
Rc ride height gauge by o0aaron0o
...eight gauge by o0aaron0o
thingiverse
made this rc ride height to check the height of my 1/10th scale drifter.
height from 4-13mm
thingiverse
free
RC 10th scale ride height gauge 20-30mm by SargePB
...ncrements should be plenty for all short course trucks and buggy's. you can sharpie the numbers to make them stand out more.
thingiverse
free
1/10 Scale RC Buggy (Drivetrain)
...1/10 scale rc buggy (drivetrain)
thingiverse
https://youtu.be/dc38v5ndsos
thingiverse
free
1:10 rc buggy wheel (diameter: 55mm) by MHVTommy
...1:10 rc buggy wheel (diameter: 55mm) by mhvtommy
thingiverse
generic 1:10 rc buggy wheel.
thingiverse
free
RC Buggy Rear Wheel 1/10 by iago_wild
...rc buggy rear wheel 1/10 by iago_wild
thingiverse
rear wheel suitable to rc 1/10 buggy. great on rc tracks!
Eayars
thingiverse
free
Thermometer holder by eayars
...grain goes in the same direction as the thermometer, then the spring-clips just break rather than holding the thermometer firmly.
thingiverse
free
1-degree camber guide for 1/10-scale RC cars by eayars
...t's useful. it has a cutout for wheel-nut clearance as well. i've printed this in abs on a solidoodle, and it works well.
thingiverse
free
Fatshark FPV cockpit insert for Skysurfer RC plane by eayars
...r rc plane, but i don't have access to an easystar to test the fit. if anyone has opportunity to check that fit, let me know.
Buggy
thingiverse
free
buggy by Syzguru11
...buggy by syzguru11
thingiverse
buggy
thingiverse
free
buggy by herzkasperl
...buggy by herzkasperl
thingiverse
buggy
thingiverse
free
buggy by beastmode11114
...buggy by beastmode11114
thingiverse
buggy
thingiverse
free
Buggy by Borja98
...buggy by borja98
thingiverse
real buggy
thingiverse
free
beach buggy - gaslands
...beach buggy - gaslands
thingiverse
beach buggy - gaslands
thingiverse
free
DIsk for buggy wheel
...disk for buggy wheel
thingiverse
disk for conversion of tehnolog robogear buggy
thingiverse
free
manchon buggy by dimdu27
...manchon buggy by dimdu27
thingiverse
manchon pour arceau de buggy pgo.
thingiverse
free
CMU Buggy by maxqueenan
...cmu buggy by maxqueenan
thingiverse
a generic model of a buggy used at cmu sweepstakes. tricycle design.
thingiverse
free
Speed Buggy stencil by Longquang
...speed buggy stencil by longquang
thingiverse
speed buggy
thingiverse
free
Scrap buggies by Festera521
...scrap buggies by festera521 thingiverse buggy designes i have fiddled with for gorkamorka/40k. they need...
Ride
thingiverse
free
Raft Ride by TinyRides
...raft ride by tinyrides
thingiverse
simple intamin raft ride model
thingiverse
free
Santa's Ride by ethan_goins
...santa's ride by ethan_goins
thingiverse
santa's ride for christmas
thingiverse
free
Seal-Riding Frog
...seal-riding frog
thingiverse
a frog-man-ish thing riding a seal/sea lion.
thingiverse
free
Ride Mower Mini
...ride mower mini
thingiverse
this is a miniature riding lawn mower. change it if you like to have more details.
thingiverse
free
kangaroo riding camel by Syzguru11
...kangaroo riding camel by syzguru11
thingiverse
kanguru riding camel
thingiverse
free
Galileo Riding Rocket by jeremykemp
...galileo riding rocket by jeremykemp
thingiverse
galileo riding rocket
thingiverse
free
Kiddy Ride by aaroninclub
...kiddy ride by aaroninclub
thingiverse
i decided to create a replica of a kiddy ride play equipment from my local park.
thingiverse
free
Red Riding Hood stencil
...red riding hood stencil
thingiverse
red riding hood stencil
thingiverse
free
ride able horse by kenttk421
...ride able horse by kenttk421
thingiverse
over sized ride able horse.
thingiverse
free
Ticket To Ride station by peterjaap
...ticket to ride station by peterjaap
thingiverse
ticket to ride station as used in ttr:europe game.
Gauge
thingiverse
free
Radial Gauge (Fillet Gauge)
...wikipedia for more information about radius gauges.
be aware that the accuracy is dependent on your slicing software and printer.
thingiverse
free
gauge holder
...gauge holder
thingiverse
gauge holder - flsun cube
thingiverse
free
Gauge by thuibregtse
...gauge by thuibregtse
thingiverse
gauge using es3001 servo
thingiverse
free
Ear Gauges
...ear gauges
thingiverse
ear gauges for everyone that likes to get there stretch on
thingiverse
free
feeler gauge
...feeler gauge
thingiverse
a feeler gauges holder to replace a set that was lost
thingiverse
free
Step Gauge by afkidwe
...step gauge by afkidwe
thingiverse
step gauge
thingiverse
free
Router gauge by titie3325
...router gauge by titie3325
thingiverse
this is a router gauge
thingiverse
free
? drill gauge by lennyjoseph
...? drill gauge by lennyjoseph
thingiverse
drill gauge
thingiverse
free
Raptor Gauge by LandtreePrints
...raptor gauge by landtreeprints
thingiverse
don't forget to scale for the correct gauge size. this is about a 15.5mm gauge.
thingiverse
free
Spin Gauge by LandtreePrints
...spin gauge by landtreeprints
thingiverse
don't forget to scale for the correct gauge size. this is about a 15.5mm gauge.
Rc
thingiverse
free
AirScoop for RC by RC-WDS
...airscoop for rc by rc-wds
thingiverse
air scoop used for rc planes ,pla or abs works fine
thingiverse
free
RC Servo mount by RC-WDS
...rc servo mount by rc-wds
thingiverse
servo mount for rc foam plane...
thingiverse
free
RC CAR
...rc car
thingiverse
rc car
thingiverse
free
RC Boat
...rc boat
thingiverse
rc boat. stl3dmodels.com
thingiverse
free
RC Wings
...rc wings
thingiverse
rc airplane wings
stl3dmodels.com
thingiverse
free
RC Wheel
...rc wheel
thingiverse
printable rc wheel with 12mm inside hex.
thingiverse
free
RCS Thruster by kazukiborchardt
...rcs thruster by kazukiborchardt
thingiverse
this rcs is based on joe barnards rcs rocket.
thingiverse
free
Rc Car Stand
...rc car stand
thingiverse
basic rc car stand. great for on-road rc cars. may be too low for offroad rc cars
thingiverse
free
RC Rim / RC Felge (for WLTOYS 1/12 RC Car) by saintyno
... / rc felge (for wltoys 1/12 rc car) by saintyno
thingiverse
rc car rims
print settings:
4 to 5 walls
4 top
4 bottom
50 % infill
thingiverse
free
Cache servo RC / servo cover RC by vertigo475
...cache servo rc / servo cover rc by vertigo475
thingiverse
cache servo pour ailes rc models.
2 versions
servo cover for rc wings
10
thingiverse
free
the cube 10 x 10 x 10 mm by 3dluca
...the cube 10 x 10 x 10 mm by 3dluca
thingiverse
cube
10 x 10 x 10 mm
printing time < 5 minutes
thingiverse
free
A-10 Warthog
...a-10 warthog
thingiverse
a-10 warthog (the gun)
thingiverse
free
Stand for Voltcraft Devices SL-10, AN-10, LX-10 by Minfredus
...lmessgeraet_v1" has a "sound level meter sl-10"-branding. file "voltcraft_stand" comes without branding.
thingiverse
free
A-10 warthog
...a-10 warthog
thingiverse
a simple version of an a-10 warthog model
thingiverse
free
10 whisles
...10 whisles
thingiverse
10 whisles
if this is your design let me know
thingiverse
free
AT-10 by JARLANG
...at-10 by jarlang
thingiverse
at-10 british at - 1:72
paper project, but cool :)
thingiverse
free
Universal Z-Braces for CR-10 / CR-10S
...universal z-braces for cr-10 / cr-10s
thingiverse
universal z-braces for cr-10 / cr-10s
thingiverse
free
Fachwerkhaus 10 and 10S
...(original ~6x8m)
scale: optimized for 6mm (1:285)
format: stl
fachwerk / timberframe, optional base, 2 floors, roof with shingles
thingiverse
free
Cr-10s/10 first layer calibration by dilopsus
...cr-10s/10 first layer calibration by dilopsus
thingiverse
first layer calibration test for cr-10s/10 .
rotate model 90 degrees .
thingiverse
free
Creality CR 10 / 10s filament cleaner
...creality cr 10 / 10s filament cleaner
thingiverse
insert ptef tube in holes.
Height
thingiverse
free
Pyramid Skeleton with Height, Apothem, Radius and the Slant Height. by TheMagicSpaz
...ight. by themagicspaz
thingiverse
for printing a pyramid with the height, apothem, radius, and the slant height already modeled.
thingiverse
free
DND Height Platform With Height Labels (Remix) by h0b0byter99
...labels (remix) by h0b0byter99
thingiverse
i thought it would be helpful to have labels on the different heights so i added them.
thingiverse
free
Layer height test
... are getting smaller, so the print only takes anbout an hour at 60mm/s.
heights are imprinted to check the detail of each height.
thingiverse
free
Ohio Height Map
...ohio height map
thingiverse
this is just a simple height map of the state of ohio usa
thingiverse
free
Bed Height Elevator (Bed Height Adjustment) by engineglue
... the bed height seems to change from time to time. now you no longer need to adjust your bed, you can simply pivot your end stop.
thingiverse
free
PCIe full height bracket for half height card
... been omitted, as these are a) extremely difficult to model and b) beyond the capabilities of many general-purpose manufacturers.
thingiverse
free
Height Gage
... originally printed the part with the arm down and the base came out warped. i redesigned it to be printable with the base down.
thingiverse
free
Tennessee Height Map by Austin_Bradley230
...tennessee height map by austin_bradley230
thingiverse
height/elevation/topographic map of tennessee
thingiverse
free
Snapmaker enclosure height extension
...on for the snapmaker enclosure to fit the height extended snapmaker 1. would be compatible with all parts of the enclosure frame.
thingiverse
free
PCIe Slot Cover V1 (Full Height and Half Height) by TheGoatPuncher
... counterpart. both are relatively rigid and the 2mm thick top is more than sturdy enough to tighten your mount screws reasonably.
Scale
thingiverse
free
scale mail scale by ellrabin
...scale mail scale by ellrabin
thingiverse
this is a single scale for making scale mail (chainmail with scales).
thingiverse
free
SCALED RC CONTROLLER for scale garage ( 1:10 scale) by antigacho
...ller for scale garage ( 1:10 scale) by antigacho
thingiverse
scaled rc controller for scale garage ( 1:10 scale)
futaba inspired
thingiverse
free
scale by Ls51
...scale by ls51
thingiverse
scale for sewing 1-5 cm
thingiverse
free
Millennium Scales
...millennium scales
thingiverse
millennium scales from the yugioh series.
thingiverse
free
Scale Hole
...prints different holes horizontally and differently vertically, i added more scales. new scales are in the scalehole_v2.stl file.
thingiverse
free
Scales Plate by bbennington
...scales plate by bbennington
thingiverse
this is a modular scale armor scale
thingiverse
free
Scaled Eggs
...scaled eggs
thingiverse
simple scaled eggs for tabletop gaming.
about as tall as a standard 28mm d&d mini.
thingiverse
free
Scale by fabricjean
... scale to learn measurement and balance.
it is designed to be assembled with wooden skewers (diameter 3 mm).
no need for a stand.
thingiverse
free
Scale armor
...giverse
a "scale" armor loosely inspired from the horseshoe crab. they overlap and have holes for stitching to fabric.
thingiverse
free
Scales by CaringMother
...scales by caringmother
thingiverse
weighed
1
thingiverse
free
Magic Token +1/+1 & -1/-1 by Kilgara2B
...magic token +1/+1 & -1/-1 by kilgara2b
thingiverse
a magic the gathering token +1/+1 and -1/-1
thingiverse
free
MTG +1/+1 and -1/-1 counters by 4PStudiosGaming
...tudiosgaming
thingiverse
if you are in need of the 4pstudiosgaming +1/+1 and -1/-1 counters, then you came to the right page :-p
thingiverse
free
Fraction circle 1/2, 1/3, 1/4, 1/6, 1/8, 1/10, 1/12 by tfloveless
... 1/6, 1/8, 1/10, and 1/12 sized wedges as well as a circular base for them to fit onto. there are no labels on any of the pieces.
thingiverse
free
Adapter Syphon - 1 1/4" to 1 1/2" by _Stefano17_
...dapter for syphon - 1 1/4" to 1 1/2" h10,5mm
the project was realized with tolerances for printing with abs + tape ptf.
thingiverse
free
1 1/8" and or 1 1/5" headset press
...l fit both 1 1/8" and 1 1/5" bearing cups. i used a 3/8ths" threaded rod with nuts and thick washers on each end.
thingiverse
free
1-1/4" to 1-1/2" pipe cheeseborough clamp by aonomus
...design cheeseborough clamp for hanging lightfixtures and other items onto 1-1/4"-1-1/2" npt pipe. use at your own risk.
thingiverse
free
Shopping cart tokens 1€ 1$ 1£ by I_am_me
...them instead of money coin in your supermarket cart or in your swimming pool locker.
edit : updated 1£ coin with new dimensions
thingiverse
free
pipe thread adapter 1" to 1" 1/4 by Printerforever
...d adapter 1" to 1" 1/4 by printerforever
thingiverse
this is an adapter 1" to 1" 1/4 (male to male)
enjoy !
thingiverse
free
Playstation 2, 1:1 by Vitting
...playstation 2, 1:1 by vitting
thingiverse
made a 1:1 playstation 2.
thingiverse
free
Nesting Fraction Circle 1/2, 1/3, 1/4, 1/6, 1/8, 1/10, 1/12 V.2 by tfloveless
...re thinner and actually fit within each other to show equivalent fractions. also, check out the same version with braille (here).