Thingiverse
(revised 9/2018) Cooler for FT-5 and 713maker.com Ultralight Aero extruder mount by bwaslo
by Thingiverse
Last crawled date: 3 years ago
(note! The stl for the "frame" (or cage) part has been updated to fix a reported problem with fitting at the top between the Ultralight mount's screws and the motor. With the revised "Frame.stl", no sanding should be needed now.) :)
(Another note! Sept 2018: I redesigned the "Duct and fan mount for..." parts from scratch. Some people were having trouble getting their slicers to accept the old versions and the files were pretty messy anyway. The new ones are a little easier to print and assemble, a little lighter, and no longer need the nozzle spacer, although I left that file here in case further tweaking is needed)
This set is to provide a cooler for use with the 713maker.com Titan Aero ULTRALIGHT Extruder mount, with either a Volcano or E3D V6 hot end, for the Folgertech FT-5 printer. It is designed to be used with a 25mm deep NEMA 17 motor (17HS10-0704S), but there is a spacer to alternately use it with a 20mm deep "pancake" motor. It provides a VERY rigid and lightweight cooling solution using a 50mm x 50mm x 15mm blower fan with a direct path from output to the duct outlets while pulling cool air from the side (instead of from close to the heated bed).
All parts print without supports or rafts (though a cooler or side fan would be needed to print cleanly).
Note that not all 50mm blowers are created equal! I don't know of any of the ball-bearing types that will work with the PWM speed control provided by the MKS board of the FT-5, so unless you want to experiment it might be best to steer clear of those. For other fans, the thing to look for is the current rating -- a 12V 0.06A rated fan will work ok, but its output is pretty wimpy. Look for a 12V 0.1A to 0.16A fan, those seem to move quite a bit more air (you may even need to turn the speed down to 50% or so in some prints, quite a lot of air gets pushed out by this cooler.).
Note, also shown are my "BLTouch Mount for Titan Aero" (https://www.thingiverse.com/thing:2543467) and "Titan adaptor for using 3mm ID reverse-Bowden tube" (https://www.thingiverse.com/thing:3113268)
File descriptions:
Duct and fan mount for Volcano.stl: The duct and fan for use with Volcano hot end.
Duct and fan mount for std V6.stl: The duct and fan for use with a standard V6 (non-Volcano) hot end.
Frame.stl: A lightweight cage that goes around the motor and provides a mounting surface for the duct and fan
Back plate.stl: A plate that screws onto the back of the frame/cage and and to the back of the motor, providing better support for the frame.
Nozzle Spacer (optional).stl: a spacer to let you lower the fan duct 2mm closer to the print bed if desired. Most slicers will also let you adjust the thickness of this part if you want. Using the spacer will put more air on the part and less on the nozzle, but will reduce clearance of the duct from the bed (more likely to run into mirror mounting clips, for example).
Motor spacer (optional) for 20mm pancake: Lets you use a 20mm pancake motor instead of the 25mm pancake motor, for further weight reduction.
Hardware notes:
The screws to hold the plastic back plate to the motor are M3x 25mm (qty 2).
The screws to hold the back plate to the cage/frame are about 9mm long 3mm or #4 sheet metal or self-tap screws (qty 2) (not critical).
The screws that hold the fan to its mount are about M3x25, with M3 nuts of course (I used the M3 Nyloc nuts from the FT-5 build). (qty 2)
The screws that hold the Volcano duct to the cage are 3mm or #4 or #6 sheet metal or self-tap screws, one is about 25mm long, the other about 7mm long (1 each). Try to get a FLATHEAD one for the 25mm, so it doesn't stick out far below the duct. The small self-tap screws that hold the plastic back plate to the cage are 3mm or #4 about 9mm long.
For the Standard V6 duct, use an approximately 18mm long self-tap screw for the long one.
(If you want to get fancy, you could tap out the holes at the bottom of the cage for M3 or #4-40 screws, but self-tap seem to work well here at least with PET-G)
File Sources:
The Frame, Backplate, and Spacers are original designs done in Fusion360
The "Duct and fan mount" parts are redrawn in Fusion360, and are partially based on:
A duct design by 3D Genera: https://www.thingiverse.com/thing:2332177
A 50mm fan mount design by Onebaldman: https://www.thingiverse.com/thing:1738499
(Another note! Sept 2018: I redesigned the "Duct and fan mount for..." parts from scratch. Some people were having trouble getting their slicers to accept the old versions and the files were pretty messy anyway. The new ones are a little easier to print and assemble, a little lighter, and no longer need the nozzle spacer, although I left that file here in case further tweaking is needed)
This set is to provide a cooler for use with the 713maker.com Titan Aero ULTRALIGHT Extruder mount, with either a Volcano or E3D V6 hot end, for the Folgertech FT-5 printer. It is designed to be used with a 25mm deep NEMA 17 motor (17HS10-0704S), but there is a spacer to alternately use it with a 20mm deep "pancake" motor. It provides a VERY rigid and lightweight cooling solution using a 50mm x 50mm x 15mm blower fan with a direct path from output to the duct outlets while pulling cool air from the side (instead of from close to the heated bed).
All parts print without supports or rafts (though a cooler or side fan would be needed to print cleanly).
Note that not all 50mm blowers are created equal! I don't know of any of the ball-bearing types that will work with the PWM speed control provided by the MKS board of the FT-5, so unless you want to experiment it might be best to steer clear of those. For other fans, the thing to look for is the current rating -- a 12V 0.06A rated fan will work ok, but its output is pretty wimpy. Look for a 12V 0.1A to 0.16A fan, those seem to move quite a bit more air (you may even need to turn the speed down to 50% or so in some prints, quite a lot of air gets pushed out by this cooler.).
Note, also shown are my "BLTouch Mount for Titan Aero" (https://www.thingiverse.com/thing:2543467) and "Titan adaptor for using 3mm ID reverse-Bowden tube" (https://www.thingiverse.com/thing:3113268)
File descriptions:
Duct and fan mount for Volcano.stl: The duct and fan for use with Volcano hot end.
Duct and fan mount for std V6.stl: The duct and fan for use with a standard V6 (non-Volcano) hot end.
Frame.stl: A lightweight cage that goes around the motor and provides a mounting surface for the duct and fan
Back plate.stl: A plate that screws onto the back of the frame/cage and and to the back of the motor, providing better support for the frame.
Nozzle Spacer (optional).stl: a spacer to let you lower the fan duct 2mm closer to the print bed if desired. Most slicers will also let you adjust the thickness of this part if you want. Using the spacer will put more air on the part and less on the nozzle, but will reduce clearance of the duct from the bed (more likely to run into mirror mounting clips, for example).
Motor spacer (optional) for 20mm pancake: Lets you use a 20mm pancake motor instead of the 25mm pancake motor, for further weight reduction.
Hardware notes:
The screws to hold the plastic back plate to the motor are M3x 25mm (qty 2).
The screws to hold the back plate to the cage/frame are about 9mm long 3mm or #4 sheet metal or self-tap screws (qty 2) (not critical).
The screws that hold the fan to its mount are about M3x25, with M3 nuts of course (I used the M3 Nyloc nuts from the FT-5 build). (qty 2)
The screws that hold the Volcano duct to the cage are 3mm or #4 or #6 sheet metal or self-tap screws, one is about 25mm long, the other about 7mm long (1 each). Try to get a FLATHEAD one for the 25mm, so it doesn't stick out far below the duct. The small self-tap screws that hold the plastic back plate to the cage are 3mm or #4 about 9mm long.
For the Standard V6 duct, use an approximately 18mm long self-tap screw for the long one.
(If you want to get fancy, you could tap out the holes at the bottom of the cage for M3 or #4-40 screws, but self-tap seem to work well here at least with PET-G)
File Sources:
The Frame, Backplate, and Spacers are original designs done in Fusion360
The "Duct and fan mount" parts are redrawn in Fusion360, and are partially based on:
A duct design by 3D Genera: https://www.thingiverse.com/thing:2332177
A 50mm fan mount design by Onebaldman: https://www.thingiverse.com/thing:1738499
Similar models
thingiverse
free
FT-5 Improved Parts Fan Duct for Titan V6, 713Maker Bracket, and Pancake Motor by gzmogeek
... mount
pancake motor "short body nema 17 bipolar step motor 3.5v 1a 18.4oz.in/13ncm diy cnc" from amazon/stepperonline
thingiverse
free
FT-5 Parts Fan Duct for Titan V6, 713Maker Bracket, and Pancake Motor by gzmogeek
...since designed a improved fan duct which has way better airflow. you can find it here: http://www.thingiverse.com/thing:2178132
thingiverse
free
E3D Titan/713Maker Ultralight - Crab Claw layer fan by onebaldman
...ded for the volcano)
50mm blower fan:https://www.amazon.com/gp/product/b008p72qys/ref=oh_aui_detailpage_o00_s00?ie=utf8&psc=1
thingiverse
free
Motor cooler for Gaui R5 by AlastairC
...m fan, some 3mm bolts to hold the fan on and a 3mm tap to make the threads in the holes. a 2s or 3s pack can be velcro'ed on.
thingiverse
free
2-in-1 fan duct: extruder and filament cooler for E3D V6 VOLCANO by loimaker
...t cooler for e3d v6 volcano by loimaker
thingiverse
2-in-1 fan duct: extruder and filament cooler for e3d v6 volcano. 40mm fan.
thingiverse
free
Part Cooling - FT-5 Titan Aero - Maker713 Ultralight by Spectra3D
...plate.
update: i updated the ducts on the cooler to reduce the amount of air blowing on the hotend, and get more air to the part.
thingiverse
free
E3D V6 Volcano bowden mount for Wanhao Duplicator i3 with cooler by Tachion
...t screws
4x m4 10mm socket screws
12x m4 hexnuts
no support required!!!
update 2018.12.18.: better cooler ("cooler v2")
thingiverse
free
E3D v6 5015 fan mount for Volcano by simonvez
...t design by chito for the his e3d mount and cooler. this is for a 5015 fan. it has longer duct for the volcano edition of the e3d
thingiverse
free
HyperCube Evolution - HEVO Fusion RC - 5015 Rear Mount Fan Duct by otaku521
...rs" fixed
v6 update 7/27/2018: updated with new holder holes on the xcarriage update and ajusted the height of the fan screw
thingiverse
free
Chimera Cyclops cooling fan duct by Injinji
...or the e3 chimera or cyclops hot end.
requires 2x 32mm x 3mm (4x 1 1/4") self tapping screws to mount.
best printed in abs.
Bwaslo
thingiverse
free
Another tp holder by bwaslo
...r larger paper rolls, and that also prints a little nicer (no overhands), also check outhttps://www.thingiverse.com/thing:3575916
thingiverse
free
Port tube for speaker cabinet by bwaslo
...ill take quite a while and a lot of filament, though.... check my other things to see if i've posted a design for that yet...
thingiverse
free
Lip Balm (Chapstick) clip by bwaslo
...ng it any harder to get in. my wife lost a chapstick from it slipping out, so i made her one that is a little tighter like that.
thingiverse
free
Short 33rpm spindle for Dual 1218 turntable by bwaslo
...70s and 80s. quick print, i used pillar supports (in slic3r pe) but it might print without. beats paying $15 for one from ebay!
thingiverse
free
Don't Panic! Button guard for LCD controller by bwaslo
...n except when you really mean to!
i plan to retire and live in luxury off the tips from this submission, so keep them rolling in!
thingiverse
free
Pulleys using 608 bearings by bwaslo
... good solid piece.
i've done some in pla and in pet-g, should work ok with abs too i imagine. hope you find a use for these/
thingiverse
free
Enclosures for BMR ambient tweeters by bwaslo
...discussion, at the diyaudio.com website: http://www.diyaudio.com/forums/multi-way/326055-ambience-tweeters-using-bmr-drivers.html
thingiverse
free
Floating cup (Starbucks-remix) by cr3beast
...figured i'd share it. thank you to happymoon and bwaslo for the original and improved models that i used...
thingiverse
free
Cabinet for 2-way ported loudspeaker by bwaslo
...eason i haven't printed it yet.
if by chance anyone out there prints this (maybe for a challenge?), please post a photo here!
thingiverse
free
Reliable Filament Runout Sensor by bwaslo
...-optical-endstop-control-printer/dp/b01flsa47o/ref=sr_1_2?ie=utf8&qid=1502728465&sr=8-2&keywords=optical+limit+switch
713Maker
thingiverse
free
713maker gantry with stock hotend cooler by calabris
...bris
thingiverse
this is a cooler/bltouch mount for the stock hotend with the 713maker gantry. this is still a work in progress
thingiverse
free
Duet IR sensor mount for 713maker extruder mount
...ial ir sensor , it should mount directly up to the 713maker extruder mount. #03 is made longer for use with the mosquito and bmg.
thingiverse
free
Ft-6 713Maker Tool head camera
...ms
is being used with a servo controled video switcher for programed/macro multi feed goodness
comments or questions are welcome!
thingiverse
free
E3D Titan/713Maker Ultralight - Crab Claw layer fan by onebaldman
...ded for the volcano)
50mm blower fan:https://www.amazon.com/gp/product/b008p72qys/ref=oh_aui_detailpage_o00_s00?ie=utf8&psc=1
thingiverse
free
E3D Aero/Volcano/713Maker Ultralight - Crab Claw layer fan by onebaldman
...tml
e3d aero/volcano
50mm blower fan:https://www.amazon.com/gp/product/b008p72qys/ref=oh_aui_detailpage_o00_s00?ie=utf8&psc=1
thingiverse
free
Rostock Max Accelerometer Board Mount for 713Maker Hotend by DodgeDerek
...ne.
the part is held on to the hot end mount with the regular bolts for it and some 8mm m3 bolts to attach the board to the part.
thingiverse
free
FT-5 713Maker Ultralight BMG V6 Part Cooler by sircrisp
...ithout removing the cooling ducts by sliding it out from underneath.
print with supports enabled except inside of holes and ducts
thingiverse
free
FT-5 Dual 45 breakout for 713maker mount by satgod
...akout for 713maker mount by satgod
thingiverse
this is a dual rj-45 breakout mount for the ft-5 using a 713-maker extruder mount
thingiverse
free
Ft-6 713Maker V2
...g
the only odd-ball thing needed is 2 screws of 2.5mmx20mm (found at hardware store)
and a handfull of m3 button head screws+nuts
thingiverse
free
713Maker Ultralight Spacer for E3d AERO by travelphotog
...tact us through our 713maker fb page ( https://www.facebook.com/713maker/) and we can get one of the milled spacer sent your way.
Ultralight
3d_export
$70
Ultralight 3D Model
...export
ultralight hang glider hangglider air airplane plane wind sailplane sail powered
ultralight 3d model tartino 6235 3dexport
turbosquid
$3
cartoon ultralight
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Zephyr 2000 ultralight aircraft Zephyr 2000 ultralight aircraft
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$55
Ultralight Helicopter Mozzie Mk III
... helicopter mozzie mk iii for download as blend, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1532511)
cg_studio
$70
Ultralight3d model
...tralight3d model
cgstudio
.3ds .c4d .obj - ultralight 3d model, royalty free license available, instant download after purchase.
3d_export
$27
SuprGyro 3D Model
...suprgyro 3d model 3dexport micro microlight ultra ultralight gyro gyrocoptor concept new motion aircraft design suprgyro 3d...
3d_export
$60
Paraglider 3D Model
...paraglider 3d model 3dexport paraglider parachute parafoil parasail glider ultralight harness hang gliding flying sail para hangglider paraglider 3d...
3d_export
$58
CriCri 3D Model
...3d 3ds max mesh new aircraft aeroplane smallest twin ultralight microlight lod detail cricri 3d model zarday321 798...
cg_studio
$1900
Jabiru3d model
...jabiru3d model cgstudio aircraft jabiru jabaru ultralite ultralight private small personal general aviation enclosed cockpit composite fibreglass...
3d_export
$80
Ariel Atom 3D Model
...ariel atom 3d model 3dexport ariel atom supercar light ultralight acceleration british sports car top gear alien jay leno...
Aero
3ddd
$1
AERO
...aero
3ddd
aero
стул, производитель aero. ссылка:http://www.mebelaero.ru/catalog/detail.html?id=6647
design_connected
$18
Aero
...aero
designconnected
wendelbo aero computer generated 3d model. designed by 365° north.
3ddd
$1
AERO BC30W
...aero bc30w
3ddd
aero , барный
артикул: bc30w
производитель: aero
3ddd
$1
TERMA AERO HG
...terma aero hg
3ddd
полотенцесушитель , aero
terma radiator aero hg
design_connected
$11
Aero Round
...aero round
designconnected
restoration hardware aero round computer generated 3d model.
design_connected
$11
Aero Oval
...aero oval
designconnected
restoration hardware aero oval computer generated 3d model.
design_connected
$16
Aero 027
...aero 027
designconnected
emu group aero 027 computer generated 3d model. designed by newman , paul.
3ddd
$1
desiree aero
...desiree aero
3ddd
фабрика - desiree
коллекция - aero
описание - диван/sofa
сайт -http://www.euromobil.com
design_connected
$11
Aero 026
...aero 026
designconnected
emu group aero 026 bar stools computer generated 3d model. designed by paul newman .
turbosquid
$12
aero plane
...
royalty free 3d model aero plane for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1544795)
Revised
turbosquid
$40
counter display revised
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Cascade sewage revision shaft crosscut
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
room interior design model 001
...for the revision by contact me with email, i will do it with pleasure.<br>thanks for support<br>i hope you like it :)
3d_export
$15
engineering drone scifi
...gged in blender. textured in substance painter.<br>textures: main mat, second mat - 4096x4096<br>glass mat - 512x512.
cg_studio
$30
Apple iphone 4 Cell Phone LAST revision3d model
...4d .wrl .wrz - apple iphone 4 cell phone last revision 3d model, royalty free license available, instant download after purchase.
3d_export
$7
ficus alii plant
...lt;br>color:<br>description<br>ficus plants ,,, small revisions in modeling ,,, max2015,2012 & fbx ,, enjoyyyy
3d_export
$10
antonio lupi design timbro
...quotation of the fifties but the style has been revised in a contemporary design. romantic and elegant taste is...
3d_export
free
bed - sample
...gt;- reupload with new fbx format.<br>- edge loops added for better shading.<br>- fix flipped uv map in certain area.
3d_export
$60
mitsubishi galant 1996 - 1999 -- 8th generation -- sedan
...the 7th generation (compared to the 6th), the concern revised the design of the new generation of the galant,...
3d_export
$27
the latest automatic n95 mask machine production line drawings
...automatic n95 mask machine production line drawings<br>this set of revised drawings with complete circuit diagram + electrical equipment bom...
Cooler
archibase_planet
free
Cooler
...hibase planet
wine-cooler wine cooler kitchen equipment
rk wine cooler uc - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cooler
...cooler
archibase planet
cooler
cooler seyedmms n271212 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cooler
...cooler
archibase planet
refrigerator cooler kitchen's technics
cooler - 3d model for interior 3d visualization.
archibase_planet
free
Cooler
...er
archibase planet
pc equipment cooler computer equipment
cooler n040908 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cooler
...cooler
archibase planet
cooler cpu fan pc equipment
cooler asus n080211 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Cooler
...cooler
3dexport
water cooler. program maya 2018. materials v-ray 3.6.
3d_export
$5
Juice cooler
...juice cooler
3dexport
juice cooler
turbosquid
$10
Cooler
...uid
royalty free 3d model cooler for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1478561)
turbosquid
$20
cooler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
cooler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Ft
3ddd
free
Renault FT-17
...renault ft-17
3ddd
ft-17 , renault , танк
turbosquid
$85
40 ft container
...id
royalty free 3d model 40 ft container for download as max on turbosquid: 3d models for games, architecture, videos. (1154866)
turbosquid
$45
container 40 ft
...id
royalty free 3d model container 40 ft for download as max on turbosquid: 3d models for games, architecture, videos. (1480343)
turbosquid
$85
Renault FT-17
...yalty free 3d model renault ft-17 for download as 3ds and max on turbosquid: 3d models for games, architecture, videos. (1145251)
turbosquid
$5
NVidia FT 03
... 3d model nvidia ft 03 for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1233064)
turbosquid
$25
FT Buck Saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
Container 20 ft
...l container 20 ft for download as 3ds, max, obj, fbx, and upk on turbosquid: 3d models for games, architecture, videos. (1384306)
3ddd
free
Jaga - Maxi FT-10
... om
радиатор jaga - maxi ft-10
width: 63 cm
depth: 13 cm
height: 59 cm
сайт производителя:http://www.jaga.be/
turbosquid
$45
20 ft container
...ontainer for download as blend, blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1516815)
turbosquid
$35
Yaesu FT-897D Transceiver
...y free 3d model yaesu ft-897d transceiver for download as max on turbosquid: 3d models for games, architecture, videos. (1160274)
Extruder
3ddd
$1
Extruded Chair
...extruded chair
3ddd
extruded , tom dixon
inspired by tom dixon extruded chair
turbosquid
$15
Extruded Table
... extruded table for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1634137)
turbosquid
$2
3D Printer Extruder
...d
royalty free 3d model 3d printer extruder for download as on turbosquid: 3d models for games, architecture, videos. (1537359)
turbosquid
$1
Zombie extruded text
...oyalty free 3d model zombie extruded text for download as obj on turbosquid: 3d models for games, architecture, videos. (1322198)
turbosquid
$4
Extruder conical screw
...el extruder conical screw for download as sldpr, ige, and stl on turbosquid: 3d models for games, architecture, videos. (1524433)
turbosquid
$50
3d PRINTER - Extruder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Extruded Table 2
...xtruded table 2 for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1621846)
turbosquid
$10
Maya Extrude Tool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
world earth extrude map
...world earth extrude map
3dexport
3ddd
$1
Simply Elegant Extruded Tree Coffee Table Design
...ble by link studios. the silhouette of a tree is visible at one angle, extruded from the surface to create the support structure.
2018
turbosquid
$15
Human-2018
...turbosquid
royalty free 3d model human-2018 for download as on turbosquid: 3d models for games, architecture, videos. (1175109)
3d_export
$20
dodgechallenger srt 2018
...dodgechallenger srt 2018
3dexport
dodge_challenger srt 2018
3d_export
$20
mustang shelby 2018
...mustang shelby 2018
3dexport
mustang shelby 2018
3d_export
$20
lexus ls 2018
...lexus ls 2018
3dexport
lexus ls 2018
turbosquid
$50
CBR250RR 2018
...quid
royalty free 3d model cbr250rr 2018 for download as max on turbosquid: 3d models for games, architecture, videos. (1631746)
turbosquid
$19
Bitcoin 2018
...squid
royalty free 3d model bitcoin 2018 for download as obj on turbosquid: 3d models for games, architecture, videos. (1266554)
turbosquid
$3
chair001A-2018
...uid
royalty free 3d model chair001a-2018 for download as max on turbosquid: 3d models for games, architecture, videos. (1663170)
turbosquid
$25
Pumpkin 2018
... 3d model pumpkin 2018 for download as max, lwo, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1336084)
3d_export
$20
gt 2018
...gt 2018
3dexport
car model with rig for animation
turbosquid
$39
A8 2018
...a8 2018 for download as 3ds, obj, wrl, c4d, fbx, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1345349)
9
3ddd
$1
9
...9
3ddd
консоль
9
turbosquid
$40
Apple iPhone 9 & 9+
...del apple iphone 9 & 9+ for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1284550)
turbosquid
$12
Calligraphic Digit 9 Number 9
...hic digit 9 number 9 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389349)
3ddd
$1
PLANTS 9
...plants 9
3ddd
папоротник , кашпо
plant 9.. hope u all like it
design_connected
$11
194 9
...194 9
designconnected
194 9 computer generated 3d model. designed by lissoni, piero.
design_connected
free
Tangram 9
...tangram 9
designconnected
free 3d model of tangram 9 by lago designed by lago, daniele.
design_connected
$11
Domino 9
...domino 9
designconnected
zanotta domino 9 computer generated 3d model. designed by progetti, emaf.
design_connected
$20
Docks 9
...docks 9
designconnected
gandia blasco docks 9 computer generated 3d model. designed by romero vallejo.
3d_export
$80
mq-9
...mq-9
3dexport
3d_export
$6
washbasin-9
...washbasin-9
3dexport
Com
turbosquid
$39
coms tower
... 3d model coms tower for download as obj, fbx, blend, and stl on turbosquid: 3d models for games, architecture, videos. (1384333)
turbosquid
$35
coms tisch.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
Dot Com Icon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
3d1-com-wall.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
X-COM Senate
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
X-COM Walls
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
X-COM Astrodome
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
X-COM Apartments
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
quarteiro com 14 casas
...quarteiro com 14 casas
3dexport
um quarteirão inteiro com casas e carros estacionados nas suas garagens passieos e janrdins.
3ddd
$1
Постельное белье от CB2.com
... одеяло , cb2.com
постельное белье с сайта cb2.com , модель cray talk bed linens
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
5
turbosquid
$6
Rock 5-5
...urbosquid
royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)
3d_export
$5
hinge 5
...hinge 5
3dexport
hinge 5
turbosquid
$10
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Calligraphic Digit 5 Number 5
...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)
3ddd
$1
5 роз
...5 роз
3ddd
5 роз в стеклянной вазе
design_connected
$11
iPhone 5
...iphone 5
designconnected
apple iphone 5 computer generated 3d model.
3ddd
$1
Lola 5
...lola 5
3ddd
miniforms
lola 5 miniforms 300*65*134
3ddd
$1
Nexus 5
...dd
nexus , phone , телефон
google nexus 5 phone
3d_ocean
$15
iPhone 5
...iphone 5
3docean
3d 4d apple cinema iphone model modeling phone screen texture
iphone 5 3d model and texture realistic iphone 5.