Remixed Hellboy revolver (Good Samaritan) by JersyBeast

Last crawled date: 3 years ago

Remixed this from Danonator's excellent Hellboy Prop (http://www.thingiverse.com/thing:71235) and added in the ammo from (http://www.thingiverse.com/thing:260664) and the grip and medallion (sorry, can't seem to find the original designer).
I altered the following files to make it a little more "authentic":
The Frame and back-strap are now one piece (it wouldn't print as one piece so they need to be glued together using the pins as guides)
Created a round recess where the back-strap meets the frame in order to glue a spring to "eject" the cylinder when released. I used a slurry of ABS dissolved in acetone as glue, but epoxy should work as well
Remixed the barrel pivot to look like a screw
Made the rivets on the barrel look like screws
Gave space for trigger travel in the frame so a spring can be mounted to give trigger "pull"
Remixed the Trigun barrel (also by danonator) into the barrel to give rifling
Adjusted the frame to give a place to mount the screw for the cylinder eject. I used a spring from a pen to give it an authentic feel
8."Bored' out the holes to allow plastic cartridges to be inserted / removed.
I used springs from Harbor Freight for the release which work great (when you depress the release the cylinder pops open). It is a little more involved than "print and play", but works GREAT!
PLEASE NOTE: THIS IS A PROP. THIS HAS NEVER / WILL NEVER FIRE REAL AMMUNITION OF ANY KIND.