Remix of Ulticube by shivackt

Last crawled date: 3 years ago

date: 24.09.2018
I very thanks to @ Geaz for wonderful easy design & to share his work.
I remixed it little bit as per my needs and considering the cost. The design completed today.
I will update the progress later on
Thank u to all.
https://www.youtube.com/watch?v=lRC6YuLC1SM&feature=youtu.be
Final Update
This is remix of Ulticube by Geaz https://www.thingiverse.com/thing:2905423
Print Area: 220x220x210 (X/Y/Z in mm)
Printer Size: 360x380x440 (X/Y/Z in mm)
Features:
Using a RAMPS 1.4 board running on Marlin 1.1.9
Used extrusions:
20x20 Aluminium Extrusions corner cubes (3d printed)
5x 340mm (X Axis) = 1700 mm
4x 320mm (Y Axis) = 1280 mm
4x 400mm (Z Axis) = 1600 mm
Bed Assembly
I used acrylic as of now (but sheet metal or aluminium I preferable)
Used materials:
10x GT2-Pulley-20-Tooth-8mm-Bore
2x GT2 Pulley 20 Tooth 5mm
8x Ball-Bearing-F688ZZ
2x 200mm GT2 6mm Closed Loops
1x a few meters (3 were enough) GT2 6mm Belt
6x 8mm Inner Diameter 12mm Outer Diameter 20mm length Sinter Bronze
2x LMF12UU bearings (Z Axis) (I also uploaded 3d printable one for LM12UU)
1x 300mm Length 8mm Diameter Rod
1x 320mmL 8mmD Rod
1x 360mmL 8mmD Rod
1x 400mmL 8mmD Rod
2x 380mmL 8mmD Rod
2x 340mmL 12mmD Rod
1x 250mm 8mm Lead screw
4x Neema 17 Motors
1x12V 20 A Power Supply
1xMK2 heat bed
1xHeat bed holder
1x LCD 128x64
1x Arduino Mega 1No
1x Ramps 1.4
3x Limit switch
1xE3D V6 Hotend with Heater and Teflon tube for remote extruder
1x Bowden extruder Assembly
4x Spring for Bed
1x 3 Pin power cable
3D printing
14x Corner bracket
4x Bearing (F688ZZ) Holder for x Axis
2x Bearing (F688ZZ) holder (Type A)
2x Bearing (F688ZZ) holder (Type B)
2x Limit switch Holder (for X & Y Axis)
1x Z Limit switch holder
Used Screws
Bunch of M5 8mm (I think I got around 150 pieces and this was enough)
Bunch of M3 8mm and 12mm (For the motor mounts and Z mounts)
Bunch of M3 & M2 nuts
16x M2 10mm (for the sliders)
2x M2 8mm (for the hotend)
2x M3 22mm (for the part cooler)
https://youtu.be/60ZclHkE-REhttps://www.youtube.com/watch?v=iZPw6stqZSY