Remix - Diamond hotend TEVO Tarantula X-axis carriage by galaxyman7

Last crawled date: 3 years, 1 month ago

I just took the mount by thingirob and modified it to hold a diamond hotend. I also added a reinforcement rib because the diamond hotend is a bit heavier than others.
Steps:

You will need to print the belt locks designed by thingirob here: http://www.thingiverse.com/thing:1438795/#remixes


Print the diamond hotend mount here:http://www.thingiverse.com/thing:720520/#files
Make sure to use the "diamond_cooler_shield.stl" file.


Use the two extra M3 X 16 screws and nuts provided in the Tarantula kit to mount the hotend.

For the rest of the parts and assembly, go to the diamond hotend mount page and thingirob's carriage page.
NOTE: I also attached a few more parts that are required for the diamond upgrade