Relay TE c-3-1393209-1-b

Last crawled date: 1 year, 11 months ago

Copyright www.te.com© 2014 Tyco Electronics Corporation,a TE Connectivity Ltd. company.Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. Potter & BrumfieldT90 Series, 30A PCB RelayCoil Data Coil voltage range 5 to 110VDCMax. coil power 1.0WMax. coil temperature 155°CCoil insulation system according UL Class FCoil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance powerVDC VDC VDC Ω±10% wW 5 5 3.75 0.5 27 900 6 6 4.5 0.6 40 900 9 9 6.75 0.9 97 900 12 12 9 1.2 155 900 18 18 13.5 1.8 380 900 24 24 18 2.4 660 900 48 48 36 4.8 2560 900 110 110 82.5 11 13450 900All figures are given for coil without preenergization, at ambient temperature +23°C.Ambient temperature vs. coil voltage – 1W coilData graphed above are average values and should be verified in application. Tests were conducted within a 2’ (.6m) cube (still air); at nominal coil power @ 25°C; with normally open contact loaded; and with 4’ (1.22m) long, #10AWG load wires. P.C. board relays were mounted to a 30A, single side P.C. board. Coil rise test conducted with a 30A PC board to maintain 20°C max. rise at 30°C. The relay connections and wiring must be designed with an adequate cross section to ensure proper current flow and heat dissipation. After cleaning process knock-off nib should be removed for optimum life of wash-tight relays.n 30A, 1 form A (NO); 20A, 1 form C (CO)n Available as open frame or sealed constructionn Meets UL 508 and 873 Spacing - 3.18 through air, 6.36 over surfacen UL class F insulation system standard