Thingiverse
Rektify Mk.2 by Flygonial
by Thingiverse
Last crawled date: 3 years, 1 month ago
Assembly Guide: https://www.youtube.com/watch?v=_YKkdxhm5oI
Rektify Mk.2 is a complete redesign of the original Rektify fully-automatic Nerf blaster. Its execution has been thoroughly reconsidered: unnecessary space was cut, the mounting solutions for the grip, pusher mechanism, cycle control, and battery tray have all been revisited and improved.
Uses 130-180 (20.4mm diameter) size motors - no 180 in the pusher.
Compatible with all Nerf replacement flywheels with OD's out to 37mm
Only wheels currently larger than 37~mm OD are Daybreak wheels, and there are cages for this blaster compatible with them too.
Utilizes a horizontal flywheel cage
Accepts most magazines compatible with Hasbro Nerf blasters
Improved internal battery tray with dimensions of <=(96mm x 56mm x 33mm) - the geometry complicates this
Is top-loadable, darts can be inserted into the magazine while it is still loaded
Fits in as little as 120x120x120mm build volume
The blaster also features numerous customizable options:
Flywheel cages with center distances ranging from 43.5mm to 41.5mm
An Eclipse-compatible cage (38.5mm spacing, 14mm bore, dart guide)
Options between a dart guide or no dart guide
Options between a 15mm bore or a 14mm bore
Picatinny rails
N-Strike stock mount with sling attachment point
Attachable flared magwell
A flash hider - prevents point-blank shots from jamming and can fire MEGA darts
Kill switch mount
Voltmeter and kill switch mount
Magazine releases of varying distance to dominant hand
Pusher designs, one with a shorter braking interval but more length, the other the opposite both ways
Required for assembly:
Three 130-180 sized motors.
33 to 37mm OD flywheels meant for 2mm shafts
Arduino 'Smartcar' TT-gearbox
14-18 AWG hobby wire
Connectors of choice (XT60, Deans, etc.), and heatshrink
2 full-sized microswitches
1 submini microswitch
Screwdriver compatible with M3 threads
Allen key compatible with M3 threads
M3 nuts
M3 screws: 8mm length, 10mm length, 14mm length, 18-20mm length and 20-25mm length depending on the screw head and its effects on the length of the actual threads
M2 screws: 4-5mm length, 10mm length
A 15-20mm extension spring (mag release)
An adhesive for the 'CC Follower', most likely superglue
Wire the blaster how you would a Rapidstrike, modular connectors allowing the flywheels and pusher to be detached are highly recommended.
Public domain, and I'm writing it here straight-up that I don't care what you do with it.
Want source files? Here's the share link: https://a360.co/2uZc2Qo
Update Log (will become separate if it becomes too long):
V1.01 (8/3/18):
Adjusted 'Flared Magwell' to better fit Hasbro mags, made the angle of the flare more aggressive, and added fillets and chamfers to remove sharp edges when using the magwell as a foregrip.
Slightly increased the braking interval of the 'Pusher (LB)'.
Made the 'Flash Hider' symmetrical vertically.
Added an ambidextrous 'Sling/Stock' option.
V1.02 (8/13/18):
Altered the 'Motor Cover' design to allow it to be removable without undoing the modular cage connectors.
Altered the 'Gearbox Housing' to have stronger posts in the front for the 'Pusher Cover' to thread onto, with less stress concentrations.
V1.03 (8/19/18):
Altered the 'Spinner' to have less tight tolerances on interfacing with the gearbox.
Added more differentiation to the pushers - one is the 'Pusher (EXT)', which is 3mm longer than the other one but has a shorter braking interval. The other is 'Pusher (BRK)', which is the same as the 'Pusher (LB)', just renamed.
V1.04 (8/26/18):
Altered the 'Grip Panels' to have fillets on the upper screw mount, having cut myself on the sharp edges and corner there.
'Flash Hider' altered to be beefier and have one fewer cut-out. Previously, I could crack it with my bare hands if I tried.
Altered 'Mag Release (OH)' to actually work with the clearance provided. It is still 5mm farther from the dominant hand.
V1.05 (9/1/18):
Fixed careless mistake where adding fillets to the grip panels messed with the 'Left Panel' aesthetics.
V1.06 (12/25/18):
Fixed lack of a internal chamfer on the locking points of the Stock/Sling (L) part.
Added new part 'Orange Tip', for a minimalist barrel attachment.
Updated battery tray door locking nubs to have the chamfer in a position where it improves the structural integrity of them (have had a failure of this before).
V1.1 (2/5/18):
Big update here, and it's all related to the addition of the 'Half Magwell'.
Accepts Jet Katana dimensioned magazines, BUT they must have the conventional mag release position (ie: Kathana, Katobu). This is because the mag release on the standard Katana or even Worker Talons are too high for Rektify to fit with the position for the return spring and mag release, as they would require an extension that would make it so there is no substantial length reduction.
Also includes the necessary adjustments for the wire run, a new flared magwell, and picatinny flat top for the reduction in length.
Also includes pushers with a modification to keep them from crashing into the dart guide. These probably appreciate printing with supports, though they don't have 100% overhangs.
V1.11 (3/10/19):
Minor-ish update, primarily on adding compatibility with Daybreak wheels to this blaster platform.
Created 41 and 40mm center distance cages for Daybreak wheels, all options (15 vs. 14mm bore, dart guide) also available.
Rektify Mk.2 is a complete redesign of the original Rektify fully-automatic Nerf blaster. Its execution has been thoroughly reconsidered: unnecessary space was cut, the mounting solutions for the grip, pusher mechanism, cycle control, and battery tray have all been revisited and improved.
Uses 130-180 (20.4mm diameter) size motors - no 180 in the pusher.
Compatible with all Nerf replacement flywheels with OD's out to 37mm
Only wheels currently larger than 37~mm OD are Daybreak wheels, and there are cages for this blaster compatible with them too.
Utilizes a horizontal flywheel cage
Accepts most magazines compatible with Hasbro Nerf blasters
Improved internal battery tray with dimensions of <=(96mm x 56mm x 33mm) - the geometry complicates this
Is top-loadable, darts can be inserted into the magazine while it is still loaded
Fits in as little as 120x120x120mm build volume
The blaster also features numerous customizable options:
Flywheel cages with center distances ranging from 43.5mm to 41.5mm
An Eclipse-compatible cage (38.5mm spacing, 14mm bore, dart guide)
Options between a dart guide or no dart guide
Options between a 15mm bore or a 14mm bore
Picatinny rails
N-Strike stock mount with sling attachment point
Attachable flared magwell
A flash hider - prevents point-blank shots from jamming and can fire MEGA darts
Kill switch mount
Voltmeter and kill switch mount
Magazine releases of varying distance to dominant hand
Pusher designs, one with a shorter braking interval but more length, the other the opposite both ways
Required for assembly:
Three 130-180 sized motors.
33 to 37mm OD flywheels meant for 2mm shafts
Arduino 'Smartcar' TT-gearbox
14-18 AWG hobby wire
Connectors of choice (XT60, Deans, etc.), and heatshrink
2 full-sized microswitches
1 submini microswitch
Screwdriver compatible with M3 threads
Allen key compatible with M3 threads
M3 nuts
M3 screws: 8mm length, 10mm length, 14mm length, 18-20mm length and 20-25mm length depending on the screw head and its effects on the length of the actual threads
M2 screws: 4-5mm length, 10mm length
A 15-20mm extension spring (mag release)
An adhesive for the 'CC Follower', most likely superglue
Wire the blaster how you would a Rapidstrike, modular connectors allowing the flywheels and pusher to be detached are highly recommended.
Public domain, and I'm writing it here straight-up that I don't care what you do with it.
Want source files? Here's the share link: https://a360.co/2uZc2Qo
Update Log (will become separate if it becomes too long):
V1.01 (8/3/18):
Adjusted 'Flared Magwell' to better fit Hasbro mags, made the angle of the flare more aggressive, and added fillets and chamfers to remove sharp edges when using the magwell as a foregrip.
Slightly increased the braking interval of the 'Pusher (LB)'.
Made the 'Flash Hider' symmetrical vertically.
Added an ambidextrous 'Sling/Stock' option.
V1.02 (8/13/18):
Altered the 'Motor Cover' design to allow it to be removable without undoing the modular cage connectors.
Altered the 'Gearbox Housing' to have stronger posts in the front for the 'Pusher Cover' to thread onto, with less stress concentrations.
V1.03 (8/19/18):
Altered the 'Spinner' to have less tight tolerances on interfacing with the gearbox.
Added more differentiation to the pushers - one is the 'Pusher (EXT)', which is 3mm longer than the other one but has a shorter braking interval. The other is 'Pusher (BRK)', which is the same as the 'Pusher (LB)', just renamed.
V1.04 (8/26/18):
Altered the 'Grip Panels' to have fillets on the upper screw mount, having cut myself on the sharp edges and corner there.
'Flash Hider' altered to be beefier and have one fewer cut-out. Previously, I could crack it with my bare hands if I tried.
Altered 'Mag Release (OH)' to actually work with the clearance provided. It is still 5mm farther from the dominant hand.
V1.05 (9/1/18):
Fixed careless mistake where adding fillets to the grip panels messed with the 'Left Panel' aesthetics.
V1.06 (12/25/18):
Fixed lack of a internal chamfer on the locking points of the Stock/Sling (L) part.
Added new part 'Orange Tip', for a minimalist barrel attachment.
Updated battery tray door locking nubs to have the chamfer in a position where it improves the structural integrity of them (have had a failure of this before).
V1.1 (2/5/18):
Big update here, and it's all related to the addition of the 'Half Magwell'.
Accepts Jet Katana dimensioned magazines, BUT they must have the conventional mag release position (ie: Kathana, Katobu). This is because the mag release on the standard Katana or even Worker Talons are too high for Rektify to fit with the position for the return spring and mag release, as they would require an extension that would make it so there is no substantial length reduction.
Also includes the necessary adjustments for the wire run, a new flared magwell, and picatinny flat top for the reduction in length.
Also includes pushers with a modification to keep them from crashing into the dart guide. These probably appreciate printing with supports, though they don't have 100% overhangs.
V1.11 (3/10/19):
Minor-ish update, primarily on adding compatibility with Daybreak wheels to this blaster platform.
Created 41 and 40mm center distance cages for Daybreak wheels, all options (15 vs. 14mm bore, dart guide) also available.
Similar models
thingiverse
free
Dart guide compatible pusher by Eccentriclulz
...cages with dart guides. used in conjunction with talon compatible cages by ahalekelly (https://www.thingiverse.com/thing:2843287)
thingiverse
free
Rektify - Fully Automatic Foam Dart Blaster by Flygonial
...llower to fully wrap around the lever arm of the switch, preventing a failure where the follower debonds and locks up the pusher.
thingiverse
free
Lynx Angled Talon Magwell by TriangleFabrications
...er: you'll need to have a well calibrated printer to print a turnaround that is an adequate replacement for the original one.
thingiverse
free
Worker PMag Half Dart Conversion Kit by Mrheathpants
...k the only part you need to change for any given mag is the guide piece, which will vary in length and curve depending on the mag
thingiverse
free
Mag to Rival Pusher Adapter by kuryaka
...ounds.
requires two bolts and an extension spring for assembly.
work in progress - more complete documentation in a week or so.
thingiverse
free
Nerf Modulus Flared Magwell by flemdogmillionaire
...gwell. nothing much, but it works great.
update: the -a files have a cutout to allow for 18 stick mags and extended mag releases.
thingiverse
free
IVI Zinc Flared Magwell and Frame Remix by Vikinger119
...e well and an angular muzzle aesthetic. files are included to allow printing as a complete frame, in two parts or in three parts.
thingiverse
free
Slanted Angled Mag Lynx with smaller thumbehole stock by PiggyJJ
...stock by piggyjj
thingiverse
will need stock, dart guide, mag release and magwell from jdollars' original slanted mag design
thingiverse
free
Rekalibrate by Messinger91
...pes.
7-7-18: higher crush wheels and cage added, "mega test v2-v2" and "rek cage crush+ (4)" respectively.
thingiverse
free
AF Spectrum Half-Dart Pusher for Worker Flywheel Mag Converter by VCProFoam
...ctively push up on the magazine, the pusher may bind with the mag converter but under normal use this isn't an issue.
cheers!
Rektify
thingiverse
free
Rektify Mk.2 - Hy-Con Conversion by Flygonial
...th x-tip waffles).
v1.01 (8/21/18): added reliefs in the 'phase filler' to not conflict with the motor mount screw heads.
thingiverse
free
Rektify - Fully Automatic Foam Dart Blaster by Flygonial
...llower to fully wrap around the lever arm of the switch, preventing a failure where the follower debonds and locks up the pusher.
thingiverse
free
Rekalibrate by Messinger91
...else can be found in the original files of rektify unique hardware: stryfe jam door pins used in the...
thingiverse
free
Paragon V1 - A Nerf Vortex Flywheel Blaster by BuffdaddyNerf
...for now, i'm using the handle off of a rektify mk2 (made by flygonial) until i can design a...
Flygonial
thingiverse
free
Rapidstrike Pusher Motor Cover by Flygonial
...igned a motor cover to replace a previous one that got blown off by a pusher crash, and decided i had little reason not to share.
thingiverse
free
Trilogy Shell Triple Holder by Flygonial
...d after a hasbro design, and meant to fit n-strike tactical rails. requires 2 m3 screws of 5-10mm in length, prints in two parts.
thingiverse
free
Gryphon F3D Files by Flygonial
...e still has a public sharing link, i thought that i should make a more permanent repository for these files for community access.
thingiverse
free
Rapidstrike Flared Magwell (friction fit) by Flygonial
... have done more of a refined aesthetic approach to this design, but whatever.
v1.1: completely redid the aesthetics of the design
thingiverse
free
Stryfe Flared Magwell (friction-fit) by Flygonial
...ase3d and blastertech, along with aesthetic cues from both.
overview video [only for older magwell]: https://youtu.be/whubd7ntqfu
thingiverse
free
Gryphon Folding Stock Remix by Ewokshoter
...flygonials gryphon and mussys folding stock adapter mussy: https://www.thingiverse.com/thing:3084027 flygonial https://www.thingiverse.com/thing:3576276 this page only includes the files printed in...
thingiverse
free
Rektify Mk.2 - Hy-Con Conversion by Flygonial
...th x-tip waffles).
v1.01 (8/21/18): added reliefs in the 'phase filler' to not conflict with the motor mount screw heads.
thingiverse
free
Stryfe Switch Plate - Screw Mounted and Friction Secured by Flygonial
...#39;d onto the stock rev trigger that will ensure that it engages with the switch no matter how hard i try to make it not engage.
thingiverse
free
Nerf Semi-Automatic Brushed Flywheel Blaster by Flygonial
...upon yourself to assemble one. that said, feel free to do whatever you please with the files, no credit or attribution necessary.
Mk
3d_export
$5
scorpion mk
...scorpion mk
3dexport
scorpion mk .zpr,stl,obj,stl,
turbosquid
$6
MK 11
...turbosquid
royalty free 3d model mk 11 for download as blend on turbosquid: 3d models for games, architecture, videos. (1223895)
3d_export
$5
Qubeley MK-II
...qubeley mk-ii
3dexport
3d lowpoly type qubeley mk-ii
turbosquid
$3
MK killer
...lty free 3d model mk killer for download as fbx, obj, and 3ds on turbosquid: 3d models for games, architecture, videos. (1638698)
turbosquid
$25
Valentine Mk
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Mk-16
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
Mk-16
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
mk-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$25
Merkava MK 1 3D Model
... 1 3d model
3dexport
merkava mk-1 tank low-poly model maya mk1 mk mk-2 mk-3 israel army
merkava mk 1 3d model rom64 5311 3dexport
3ddd
$1
мясорубка Panasonic MK G1800P
...мясорубка panasonic mk g1800p
3ddd
мясорубка , panasonic
мясорубка panasonic mk g1800p
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур