REDCAT GEN 7 PRO/SPORT DRIVE SHAFT BOOT by camaroboy383 3d model
3dmdb logo
Thingiverse
REDCAT GEN 7 PRO/SPORT DRIVE SHAFT BOOT by camaroboy383

REDCAT GEN 7 PRO/SPORT DRIVE SHAFT BOOT by camaroboy383

by Thingiverse
Last crawled date: 3 years ago
This is a driveshaft boot I designed for the gen 7 pro/ sport with the redcat aluminum driveshafts... these fit both at the transmission u joint and the pinion u joint... pinion angles on these are awful and chow u joints out like crazy if not cleaned and oiled contstantly… so I came up with these cv style boots that fit over the u joint area's... I pack mine with grease to be sure the u joints are constantly lubed...
these should be printed in tpu of some sort... ninja flex works well... no need for supports... print it as it is... one side of the boot is larger for the shaft itself and is installed that way first.. when you get to the u joint stop and pack that area with grease... then twist them on the rest of the way... slide them back just far enough to install the pinion allen pin... slide the boot back a touch once the pin is installed... these double as a loose pin fail safe as well.. pins cant fall out...
enjoy!

Tags